BS EN 15755-1:2014
Current
The latest, up-to-date edition.
Glass in building. Adhesive backed polymeric filmed glass Definitions and requirements
Hardcopy , PDF
English
31-08-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Glass substrate
5 Product definitions
6 Determination of the durability
of adhesive backed polymeric
filmed glass
7 Appearance
8 Product information
Annex A (informative) - Guidelines for
installation of adhesive backed
polymeric film
Annex B (informative) - Film to glass compatibility
and thermal stress
Bibliography
Explaines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings.
| Committee |
B/520
|
| DevelopmentNote |
Supersedes 08/30173305 DC. (08/2014)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in EN15752‑1 . This applies to both site and factory applications. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric filmed glass that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric filmed glass, in this case, does not lose its mechanical or thermal characteristics.
| Standards | Relationship |
| EN 15755-1:2014 | Identical |
| 17/30350485 DC : 0 | BS 6262-4 - GLAZING FOR BUILDINGS - PART 4: CODE OF PRACTICE FOR SAFETY RELATED TO HUMAN IMPACT |
| EN 572-3:2012 | Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass |
| EN 12337-1:2000 | Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 13024-1:2011 | Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN 1748-2-1:2004 | Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties |
| ISO 16933:2007 | Glass in building — Explosion-resistant security glazing — Test and classification for arena air-blast loading |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 14321-1:2005 | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description |
| EN 14179-1:2016 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| EN 572-7:2012 | Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass |
| EN 1096-1:2012 | Glass in building - Coated glass - Part 1: Definitions and classification |
| EN 12898:2001 | Glass in building - Determination of the emissivity |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| ISO 12543-3:2011 | Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass |
| EN 1863-1:2011 | Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 14178-1:2004 | Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
| EN 13541:2012 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
| EN ISO 12543-3:2011 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) |
| EN 1036-1:2007 | Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods |
| EN 15752-1:2014 | Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements |
| EN 50147-1:1996 | Anechoic chambers - Part 1: Shield attenuation measurement |
| ISO 12543-2:2011 | Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass |
| EN 572-6:2012 | Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass |
| EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| EN 50147-2 : 1996 | ANECHOIC CHAMBERS - PART 2: ALTERNATIVE TEST SITE SUITABILITY WITH RESPECT TO SITE ATTENUATION |
| EN 12150-1:2015 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| EN 15683-1:2013 | Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 1748-1-1:2004 | Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties |
| ISO 8510-2:2006 | Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel |
| EN 572-4:2012 | Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 572-5:2012 | Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass |
| EN 572-8:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes |
| EN ISO 8510-2:2010 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006) |
| EN 15682-1:2013 | Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part 1: Definition and description |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.