Skip to content
Please enter a keyword to search

  • EN 572-2:2012

    Current The latest, up-to-date edition.

    Glass in building - Basic soda lime silicate glass products - Part 2: Float glass

    Available format(s): 

    Language(s): 

    Published date:  18-07-2012

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Dimensional requirements
    5 Quality requirements
    6 Designation
    Annex A (normative) - Method for measuring
            spot fault size (including halo)
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies dimensional and minimum quality requirements (in respect of optical and visual faults) for float glass, as defined in EN 572-1:2012, for use in building.This European Standard applies only to float glass supplied in jumbo sizes (see Note 1), split sizes (see Note 2) and oversize plates (see Note 3).NOTE 1Jumbo sizes - PLF (plateau largeur de fabrication) - Bandmasse.NOTE 2Split sizes - DLF (dimension largeur de fabrication) - Geteilte Bandmasse.NOTE 3Oversize plates - these are plates where the nominal length, H, is greater than 6 000 mm. These plates are produced to special order.EN 572-8 gives information on float glass in sizes (i.e. supplied and final cut sizes) other than those covered by this European Standard.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 129
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    07/30046996 DC : DRAFT AUG 2007 BS ISO 1288-4 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 4: TESTING OF CHANNEL SHAPED GLASS
    14/30313892 DC : 0 BS EN ISO 10140-1 - ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS
    DIN EN 15752-1:2014-10 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
    UNI EN 15755-1 : 2015 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
    01/108539 DC : DRAFT NOV 2001 PREN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS - PART 9: EVALUATION OF CONFORMITY
    BS EN 15752-1:2014 Glass in building. Adhesive backed polymeric film Definitions and requirements
    11/30240447 DC : 0 BS EN 1863-1 - GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
    PREN 572-9 : DRAFT 2017 GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
    99/108002 DC : DRAFT OCT 99 PREN 12600 - GLASS IN BUILDING - PENDULUM TEST - IMPACT TEST METHOD FOR FLAT GLASS AND PERFORMANCE REQUIREMENTS (SECOND ENQUIRY)
    PREN 12150-1 : DRAFT 2012 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
    ISO 28278-1:2011 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
    BS EN 1279-1:2004 Glass in building. Insulating glass units Generalities, dimensional tolerances and rules for the system description
    NF EN 12758 : 2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
    DIN EN 1096-4:2015-06 (Draft) GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
    I.S. EN 12758:2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
    DIN EN 13022-1:2014-08 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
    DIN EN 572-1:2016-06 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
    DIN EN 1863-1:2012-02 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
    DIN EN 572-8:2016-06 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
    BS EN 12758:2011 Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties
    BS EN 14179-1:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Definition and description
    BS EN 1096-1:2012 Glass in building. Coated glass Definitions and classification
    BS EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass Evaluation of conformity/Product standard
    UNE-EN 13022-1:2015 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
    BS EN 357:2004 Glass in building. Fire resistant glazed elements with transparent or translucent glass products. Classification of fire resistance
    UNE-EN 1863-1:2012 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
    BS EN 572-8 : 2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
    BS EN 572-1 : 2012 GLASS IN BUILDING - BASIC SODALIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
    BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass Definition and description
    EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
    EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
    DIN EN 16477-1:2017-07 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
    EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
    EN 12758:2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
    EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
    EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
    99/100074 DC : DRAFT JAN 1999 PREN 13474-1 - GLASS IN BUILDING - DESIGN OF GLASS PANES - PART 1: GENERAL BASIS OF DESIGN
    12/30255284 DC : DRAFT APR 2012 BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD
    PREN 1863-1 : DRAFT 2011 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
    12/30254909 DC : 0 BS EN 12150-1 - GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
    DIN EN 12150-1:2015-12 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    I.S. EN 1096-4:2004 GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD
    17/30351893 DC : 0 BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS
    PREN 12150-2 : DRAFT 2017 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
    I.S. EN 1279-1:2004 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
    UNI EN 15752-1 : 2015 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
    PREN 14449 : DRAFT 2017 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
    I.S. EN 1279-2:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
    DIN EN 16477-1:2016-07 (Draft) GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
    EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard
    EN 13031-1:2001 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
    I.S. EN 1279-3:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES
    DIN EN 12337-2:2005-01 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 12337-2:2004
    DIN EN 572-9:2005-01 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
    DIN EN 15434 E : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
    DIN EN 12758:2011-04 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
    I.S. EN 13022-1:2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
    I.S. EN 14179-1:2016 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    I.S. EN 1863-1:2011 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
    I.S. EN 1096-3:2012 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
    DIN EN 1036-2:2008-05 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY - PRODUCT STANDARD
    DIN EN 571-1:1997-03 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES
    I.S. EN 572-1:2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 1: DEFINITIONS AND GENERAL PHYSICAL AND MECHANICAL PROPERTIES
    I.S. EN 357:2004 GLASS IN BUILDING - FIRE RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
    DIN EN 1036-1:2008-03 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
    I.S. EN 572-8:2012 GLASS IN BUILDING - BASIC SODA-LIME SILICATE GLASS PRODUCTS - PART 8: SUPPLIED AND FINAL CUT SIZES
    I.S. EN 1096-1:2012 GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
    I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
    08/30173305 DC : DRAFT JAN 2008 BS EN 15755-1 - GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND DESCRIPTION
    03/109956 DC : 0 BS EN 12488 - GLASS IN BUILDING - GLAZING REQUIREMENTS - ASSEMBLY RULES
    UNE-EN 15752-1:2015 Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements
    I.S. EN 1036:1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
    PREN 14179-1 : DRAFT 2014 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    UNE-EN 16477-1:2017 Glass in building - Painted glass for internal use - Part 1: Requirements
    00/104442 DC : DRAFT JUNE 2000 PREN 13916 - FIRE RESISTING DOORSETS - REQUIREMENTS AND CLASSIFICATION
    14/30261635 DC : 0 BS EN 131-2:2010/A2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    08/30170590 DC : DRAFT JULY 2008 BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
    97/107906 DC : DRAFT DEC 1997 PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY
    I.S. EN 16477-1:2016 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
    I.S. EN 12150-1:2015 GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    UNE-EN ISO 10140-1:2016 Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016)
    EN 1279-3:2002 Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances
    UNE-EN 12150-1:2016 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
    EN 1279-2:2002 Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
    BS EN 12150-1:2015 Glass in building. Thermally toughened soda lime silicate safety glass Definition and description
    ISO 20492-1:2008 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
    I.S. EN 13031-1:2002 GREENHOUSES: DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
    UNE-EN 12758:2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
    DIN EN 14179-2:2005-08 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
    DIN EN 12150-2:2005-01 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004
    DIN EN 1863-2:2005-01 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004
    DIN EN 1096-3:2012-04 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
    BS EN 13022-1:2014 Glass in building. Structural sealant glazing Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
    BS EN 572-9:2004 Glass in building. Basic soda lime silicate glass products Evaluation of conformity/Product standard
    ISO 10140-1:2016 Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products
    UNE-EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
    UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
    UNI EN 1096-3 : 2012 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
    UNI EN 12758 : 2011 GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES
    UNI EN 13022-1 : 2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS FOR SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
    UNI EN 1096-1 : 2012 Glass in building - Coated glass - Part 1: Definitions and classification
    UNI EN 1863-1 : 2012 GLASS IN BUILDING - HEAT STRENGTHENED SODA LIME SILICATE GLASS - PART 1: DEFINITION AND DESCRIPTION
    BS EN 16477-1:2016 Glass in building. Painted glass for internal use Requirements
    BS EN 1036-1:2007 Glass in building. Mirrors from silver-coated float glass for internal use Definitions, requirements and test methods
    14/30310335 DC : 0 BS EN 14179-1 - GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    03/100996 DC : DRAFT MAR 2003 PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING SYSTEMS - SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
    BS EN 15755-1:2014 Glass in building. Adhesive backed polymeric filmed glass Definitions and requirements
    02/100468 DC : DRAFT JAN 2002 PREN 14179-1 - GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    PREN 1096-3 : DRAFT 2011 GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
    PREN 14179-2 : DRAFT 2017 GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: PRODUCT STANDARD
    I.S. EN 1036-1:2007 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 1: DEFINITIONS, REQUIREMENTS AND TEST METHODS
    BS EN 1279-2:2002 Glass in building. Insulating glass units Long term test method and requirements for moisture penetration
    I.S. EN 15755-1:2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
    BS EN 1096-4:2004 Glass in building. Coated glass Evaluation of conformity/Product standard
    PREN 13031-1 : DRAFT 2017 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
    UNE-EN 15755-1:2015 Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements
    DIN EN 1288-1:2000-09 GLASS IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS
    DIN EN 13031-1:2003-09 GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
    BS EN 12337-1:2000 Glass in building. Chemically strengthened soda lime silicate glass Definition and description
    BS EN 1863-2:2004 Glass in building. Heat strengthened soda lime silicate glass Evaluation of conformity. Product standard
    UNE-EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
    BS EN 1036:1999 Glass in building. Mirrors from silver-coated float glass for internal use
    BS EN 1288-1:2000 Glass in building. Determination of the bending strength of glass Fundamentals of testing glass
    BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
    BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
    DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
    BS EN 13031-1:2001 Greenhouses. Design and construction Commercial production greenhouses
    EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
    EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
    EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
    EN 357:2004 Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
    EN 14179-1:2016 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
    EN 15752-1 : 2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
    EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard
    EN 15755-1 : 2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
    EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
    EN 16477-1:2016 Glass in building - Painted glass for internal use - Part 1: Requirements
    EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
    EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
    PREN 1096-1 : DRAFT 2011 GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
    ISO 13640:1999 Building construction Jointing products Specifications for test substrates
    11/30244801 DC : 0 BS EN 1096-3 - GLASS IN BUILDING - COATED GLASS - PART 3: REQUIREMENTS AND TEST METHODS FOR CLASS C AND D COATINGS
    EN 1279-1:2004/AC:2006 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
    17/30357034 DC : 0 BS EN 12150-1 AMENDMENT 1 - GLASS IN BUILDING - THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 1: DEFINITION AND DESCRIPTION
    DIN EN 15755-1:2014-10 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILMED GLASS - PART 1: DEFINITIONS AND REQUIREMENTS
    12/30266556 DC : 0 BS EN 16477-1 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
    17/30359844 DC : 0 BS EN 572-9 - GLASS IN BUILDING - BASIC SODA LIME SILICATE GLASS PRODUCTS - PART 9: PRODUCT STANDARD
    I.S. EN 15752-1:2014 GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS
    BS EN 1279-3:2002 Glass in building. Insulating glass units Long term test method and requirements for gas leakage rate and for gas concentration tolerances
    03/100997 DC : DRAFT MAR 2003 BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT
    08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
    11/30244795 DC : 0 BS EN 1096-1 - GLASS IN BUILDING - COATED GLASS - PART 1: DEFINITIONS AND CLASSIFICATION
    DIN EN 16477-1 E : 2017 GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS
    I.S. EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO/DIS 10140-1:2014)
    12/30266553 DC : 0 BS EN 16477-2 - GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY
    07/30046980 DC : DRAFT AUG 2007 BS ISO 1288-1 - GLAZING IN BUILDING - DETERMINATION OF THE BENDING STRENGTH OF GLASS - PART 1: FUNDAMENTALS OF TESTING GLASS
    EN ISO 10140-1:2016 ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 1: APPLICATION RULES FOR SPECIFIC PRODUCTS (ISO 10140-1:2016)
    08/30170610 DC : DRAFT OCT 2008 BS EN ISO 12543-5 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 5: DIMENSIONS AND EDGE FINISHING
    BS ISO 13640:1999 Building construction. Jointing products. Specifications for test substrates
    ISO 20492-2:2008 Glass in buildings - Insulating glass — Part 2: Chemical fogging tests
    17/30354665 DC : 0 BS EN 13031-1 - GREENHOUSES - DESIGN AND CONSTRUCTION - PART 1: COMMERCIAL PRODUCTION GREENHOUSES
    DIN EN 1279-1:2015-08 (Draft) GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION
    DIN EN 1096-1:2012-04 Glass in building - Coated glass - Part 1: Definitions and classification
    BS EN 1096-3:2012 Glass in building. Coated glass Requirements and test methods for class C and D coatings
    BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
    BS EN 1036-2:2008 Glass in building. Mirrors from silver-coated float glass for internal use Evaluation of conformity; product standard
    BS EN 12150-2:2004 Glass in building. Thermally toughened soda lime silicate safety glass Evaluation of conformity/Product standard
    BS EN 14179-2:2005 Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass Evaluation of conformity/product standard
    EN 1036 : 1999 GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE
    CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
    EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
    EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
    EN 1036-1:2007 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
    EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass
    DIN EN 1279-3:2003-05 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES
    DIN EN 357:2005-02 GLASS IN BUILDING - FIRE-RESISTANT GLAZED ELEMENTS WITH TRANSPARENT OR TRANSLUCENT GLASS PRODUCTS - CLASSIFICATION OF FIRE RESISTANCE
    EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
    EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
    UNE-EN 572-1:2012 Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
    UNE-EN 15434:2007 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
    UNE-EN 572-8:2013 Glass in building - Basic soda lime silicate glass products - Part 8: Supplied and final cut sizes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
    EN 572-8:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 8: Supplied and final cut sizes
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective