BS EN 29142:1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints
Hardcopy , PDF
English
15-09-1993
08-01-2004
Cooperating organizations
National foreword
Brief history
Guide
1 Scope
2 Normative references
3 Principle
4 Materials
5 Apparatus
6 Specimens
7 Procedure
8 Expression of results
9 Test report
Annexes
A (informative) General conditions of ageing
B (informative) Atmospheric conditions for single-
variable ageing
C (informative) Atmospheric conditions for multi-
variable ageing
D (informative) Atmospheric conditions for cyclic
ageing
E (informative) Special procedures
F (informative) Exposure to chemical attack
Table
A.1 List of preferred temperatures and tolerances
D.1 Typical conditions for cycle D1, in which theta A
and theta B are taken as (23 + or - 2) deg C and
(55 + or - 2) deg C respectively
D.2 Typical conditions for cycle D2, in which theta A,
theta B and theta C are taken as 40 deg C, - 20
deg C and 70 deg C respectively
D.3 Typical conditions for cycle D3, in which the
temperatures of the first, second and third stages
are 40 deg C, - 20 deg C and 70 deg C respectively
D.4 A typical humid-heat and cold cycle
D.5 A typical dry-heat, humid-heat and cold cycle
D.6 A typical cycle for immersion in water and drying
D.7 A typical cycle for alternating immersion in water
and drying
D.8 A typical cycle for immersion in boiling water and
drying
D.9 A typical cycle for immersion in boiling water
followed by drying, and then dry heat and re-
immersion in boiling water
D.10 A typical cycle for immersion in boiling water
followed by drying, and the re-immersion in
boilingwater
D.11 A typical cycle for immersion in water, exposure
to cold and exposure to dry heat
National annexes
NA (informative) Committees responsible
NB (informative) Cross-references
Laboratory procedures for conditioning adhesively bonded assemblies under a variety of combinations of temperature, humidity and immersion in salt solution.
| Committee |
PRI/52
|
| DevelopmentNote |
DRAFT FOR COMMENT 87/54222 DC
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 29142 : 1993 | Identical |
| EN 29142:1993/AC:1997 | Identical |
| NS EN 29142 : 93 AC 93 | Identical |
| ISO 9142:2003 | Identical |
| NEN EN 29142 : 93 C1 97 | Identical |
| I.S. EN 29142:1994 | Identical |
| NF EN 29142 : 1993 | Identical |
| UNE-EN 29142/AC:2001 | Identical |
| DIN EN 29142:1993-09 | Identical |
| ISO 483:2005 | Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value |
| ISO 4892:1981 | Plastics — Methods of exposure to laboratory light sources |
| ISO 3205:1976 | Preferred test temperatures |
| ISO 4588:1995 | Adhesives — Guidelines for the surface preparation of metals |
| ISO 4587:2003 | Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| ISO 175:2010 | Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 6238:2001 | Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading |
| ISO 291:2008 | Plastics — Standard atmospheres for conditioning and testing |
| ISO 3768:1976 | Metallic coatings — Neutral salt spray test (NSS test) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.