BS EN 295-1:2013
Current
The latest, up-to-date edition.
Vitrified clay pipe systems for drains and sewers Requirements for pipes, fittings and joints
Hardcopy , PDF
English
28-02-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements for pipes and fittings
6 Requirements for joints and joint assemblies
7 Common requirements for pipes, fittings and joints
8 Designation
9 Marking
10 Evaluation of conformity
Annex A (normative) - Requirements for vitrified
clay fittings
Annex B (informative) - Guidance on design,
installation and operation of sewers
and drains constructed from vitrified clay pipes
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions
of the EU Construction Products Directive
Bibliography
Defines requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
| Committee |
B/505
|
| DevelopmentNote |
Supersedes BS 65(1988), 89/15819 DC and 94/109803 DC. (09/2005) Together with BS EN 295-2, BS EN 295-4, BS EN 295-5, BS EN 295-6 and BS EN 295-7 it supersedes BS EN 295-10. Supersedes 10/30216984 DC. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
This standard also specifies requirements for rubber, polyurethane and polypropylene materials and other components used for jointing clay pipes and fittings.
This standard specifies different strength classes, systems of joint dimensions, lengths and fittings.
NOTE 1 The specifiers/purchasers can select them according to their requirements.
This standard does not apply to special fittings, adaptors and compatible accessories, perforated pipes and fittings, manholes and inspection chambers and pipes and joints for pipe jacking, which are specified in other parts of the standard series EN 295 .
NOTE 2 Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3 , respectively.
| Standards | Relationship |
| EN 295-1:2013 | Identical |
| SN EN 295-1 : 2013 | Identical |
| UNI EN 295-1 : 2013 | Identical |
| UNE-EN 295-1:2013 | Identical |
| NEN EN 295-1 : 2013 | Identical |
| NBN EN 295-1 : 2013 | Identical |
| I.S. EN 295-1:2013 | Identical |
| NF EN 295-1 : 2013 | Identical |
| NS EN 295-1 : 2013 | Identical |
| DIN EN 295-1:2013-05 | Identical |
| 07/30138205 DC : DRAFT MAR 2007 | BS 6297 - DESIGN AND INSTALLATION OF SMALL SEWAGE TREATMENT WORKS AND CESSPOOLS - CODE OF PRACTICE |
| BS 9295:2010 | Guide to the structural design of buried pipelines |
| BS 5911-103:1994 | Precast concrete pipes, fittings and ancillary products Specification for prestressed non-pressure pipes and fittings with flexible joints |
| BS 6297(2007) : 2007 | CODE OF PRACTICE FOR THE DESIGN AND INSTALLATION OF DRAINAGE FIELDS FOR USE IN WASTEWATER TREATMENT |
| BS 7158:2001 | Plastics inspection chambers for drains and sewers. Specification |
| 09/30170408 DC : DRAFT JUNE 2009 | BS 9295 - GUIDE TO THE STRUCTURAL DESIGN OF BURIED PIPELINES |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
| EN 1295-1:1997 | Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
| EN 12056-2:2000 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| EN 12889:2000 | Trenchless construction and testing of drains and sewers |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 1610:2015 | Construction and testing of drains and sewers |
| EN 12056-3:2000 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.