BS EN 60060-2:1995
Current
The latest, up-to-date edition.
High-voltage test techniques Measuring systems
Hardcopy , PDF
English
15-08-1995
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Procedures for qualification and use of
measuring systems
5 Tests and test requirements for an approved
measuring system and its components
6 Measurement of direct voltage
7 Measurement of alternating voltage
8 Measurement of lightning impulse voltage
9 Measurement of switching impulse voltage
10 Reference measuring systems
Annex A (informative) - Uncertainty of measurement
Annex B (informative) - Examples for the calculation
of measuring uncertainties in high-voltage
measurements
Annex C (informative) - Step response measurements
Annex D (informative) - Convolution method for the
determination of dynamic behaviour from step
response measurements
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Bibliography
Pertains to complete measuring systems, and to their components, used for the measurement of high voltages during laboratory and factory tests with direct voltage, alternating voltage and lightning and switching impulse voltages as specifies in IEC 60060-1.
| Committee |
PEL/42
|
| DevelopmentNote |
Supersedes 90/29948 DC, BS 923-3(1980) & BS 923-4(1980). (09/2005) Supersedes 07/30161538 DC. (03/2011)
|
| DocumentType |
Standard
|
| Pages |
92
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 60060-2 : 2011 | Identical |
| EN 60060-2:2011 | Identical |
| NF EN 60060-2 : 2011 | Identical |
| I.S. EN 60060-2:2011 | Identical |
| SN EN 60060-2 : 1994 AMD 11 1998 | Identical |
| UNE-EN 60060-2:2012 | Identical |
| NBN EN 60060-2 : 2011 | Identical |
| IEC 60060-2:2010 | Identical |
| BS 6622:1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 7835:2000 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS 7835:1996 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Methods of test |
| BS EN 60521:1995 | Class 0.5, 1 and 2 alternating-current watthour meters |
| BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| BS EN 60870-2-1:1996 | Telecontrol equipment and systems. Operating conditions Power supply and electromagnetic compatibility |
| BS EN 60517:1997 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| EN 60052:2002 | Voltage measurement by means of standard air gaps |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| EN 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 61083-1:2001 | Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments |
| IEC 60060-3:1976 | High-voltage test techniques - Part 3: Measuring devices |
| IEC 60051:1973 | Recommendations for direct acting indicating electrical measuring instruments and their accessories |
| IEC 60050-321:1986 | International Electrotechnical Vocabulary (IEV) - Part 321: Instrument transformers |
| IEC 60052:2002 | Voltage measurement by means of standard air gaps |
| IEC 61083-2:2013 | Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| IEC 61083-1:2001 | Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments |
| IEC 60050-300:2001 | International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument |
| EN 61083-2:2013 | Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.