• BS EN 60539-1:2016

    Current The latest, up-to-date edition.

    DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2016

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General items
    5 Test and measurement procedures
    Annex A (normative) - Interpretation of sampling plans
            and procedures as described in IEC 60410:1973
            for use within quality assessment systems
    Annex B (normative) - Rules for the preparation of detail
            specifications for directly heated thermistors for
            electronic equipment for use within quality
            assessment systems
    Annex C (informative) - Typical examples of mountings for
            measurements of directly heated thermistors
    Annex D (informative) - Reference to IEC 60539-1:2008
    Annex Q (normative) - Quality assessment procedures
    Bibliography
    Annex ZA (normative) - Normative references to international
             publications with their corresponding
             European publications

    Abstract - (Show below) - (Hide below)

    Pertains to directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties.

    General Product Information - (Show below) - (Hide below)

    Committee EPL/40X
    Development Note Supersedes BS EN 143000 and 00/202991 DC. (05/2002) Supersedes 06/30153438 DC. (07/2008) Supersedes 13/30287806 DC. (08/2016)
    Document Type Standard
    Publisher British Standards Institution
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61193-2:2007 Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages
    EN 60294 : 2012 MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT WITH AXIAL TERMINATIONS (IEC 60294:2012)
    EN ISO 80000-1 : 2013 QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011)
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    IEC 60068-2-58:2015+AMD1:2017 CSV Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
    IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
    IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
    EN 60068-2-20 : 2008 ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS
    EN 60068-2-1:2007 ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD
    IEC 61249-2-7:2002 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
    EN 60068-2-2:2007 ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
    IEC 60068-2-21:2006 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
    EN 60068-1:2014 ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013)
    IEC 60068-2-11:1981 ENVIRONMENTAL TESTING - TEST KA: SALT MIST
    EN 60027-1:2006/A2:2007 LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL
    IEC 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
    IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
    EN 61249-2-7:2002/corrigendum:2005 MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD
    EN 60717 : 2012 METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS (IEC 60717:2012)
    IEC 60068-2-38:2009 ENVIRONMENTAL TESTING - PART 2-38: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
    IEC 60410:1973 Sampling plans and procedures for inspection by attributes
    EN 60068-2-27:2009 ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK
    IEC 60294:2012 MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT WITH AXIAL TERMINATIONS
    IEC 60068-2-54:2006 Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing of electronic components by the wetting balance method
    EN 60068-2-38:2009 ENVIRONMENTAL TESTING - PART 2-38: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY CYCLIC TEST
    EN 60068-2-17 : 1994 BASIC ENVIRONMENTAL TESTING - TEST Q: SEALING
    IEC 60068-2-17:1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing
    EN 61193-2 : 2007 QUALITY ASSESSMENT SYSTEMS - PART 2: SELECTION AND USE OF SAMPLING PLANS FOR INSPECTION OF ELECTRONIC COMPONENTS AND PACKAGES
    EN 60068-2-21:2006 ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 60062:2016 Marking codes for resistors and capacitors
    EN 60062:2016/AC:2016-12 MARKING CODES FOR RESISTORS AND CAPACITORS (IEC 60062:2016/COR1:2016)
    ISO 80000-1:2009 Quantities and units Part 1: General
    EN 60068-2-78:2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2012)
    EN 60068-2-6:2008 ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL)
    IEC 60717:2012 METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS
    EN 60068-2-11 : 1999 ENVIRONMENTAL TESTING - TESTS - TEST KA-SALT MIST
    EN 60068-2-54 : 2006 ENVIRONMENTAL TESTING - PART 2-54: TESTS - TEST TA: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS BY THE WETTING BALANCE METHOD
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
    EN 60068-2-45:1992/A1:1993 Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents
    EN 60068-2-14:2009 ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE
    IEC 60068-2-52:2017 ENVIRONMENTAL TESTING - PART 2-52: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION)
    IEC 60068-2-69:2017 Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
    EN 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective