BS EN 61076-4-101:2001
Current
The latest, up-to-date edition.
Connectors for electronic equipment Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
Hardcopy , PDF
English
30-04-2008
1 General data
1.1 Recommended method of mounting
1.1.1 Number of contacts and contact cavities
1.2 Ratings and characteristics
1.3 Normative references
1.4 Marking
1.5 IEC type designation
1.6 Ordering information
2 Technical data
2.1 Definitions
2.1.1 Mechanical features
2.1.2 Contacts and terminations
2.1.3 Engagement sequence
2.1.4 Mechanical coding
2.2 Survey of styles and variants
2.2.1 Styles of connector modules
2.2.2 Survey of termination variants
2.2.3 Survey of coding devices
2.3 Information on application
2.3.1 Complete connectors (pairs)
2.3.2 Fixed board connectors
2.3.3 Free board connectors
2.3.4 Accessories
2.3.5 Shielding and grounding
2.3.6 Basic type of termination
2.4 Contact arrangements
3 Dimensional information
3.1 General
3.2 Isometric view and common features
3.2.1 Common features
3.2.2 Reference system
3.2.3 Height dimensions
3.2.4 Width dimensions
3.2.5 Depth dimensions
3.3 Mating information
3.3.1 Engaging direction
3.3.2 Perpendicular to engaging direction
3.3.3 Inclination
3.4 Fixed board connectors
3.4.1 Dimensions of connector modules
3.4.2 Dimensions of contacts
3.4.3 Terminations
3.5 Free board connectors
3.5.1 Dimensions of connector modules
3.5.2 Dimensions of contacts
3.5.3 Terminations
3.6 Accessories
3.6.1 Dimensions of coding devices
3.7 Mounting information for fixed board connectors
3.8 Mounting information for free board connectors
3.9 Gauges
3.9.1 Sizing gauges and retention force gauges
3.9.2 Test gauge for first contact point
4 Characteristics
4.1 Climatic category
4.2 Electrical
4.2.1 Creepage and clearance distances
4.2.2 Voltage proof
4.2.3 Current-carrying capacity
4.2.4 Contact resistance
4.2.5 Insulation resistance
4.3 Mechanical
4.3.1 Mechanical operation
4.3.2 Engaging and separating forces
4.3.3 Contact retention in insert
4.3.4 Static load, transverse
4.3.5 Gauge retention force
4.3.6 Vibration (sinusoidal)
4.3.7 Shock
4.3.8 Polarizing method
4.3.9 Robustness and effectiveness of coding
devices
5 Test schedule
5.1 General
5.1.1 Arrangement for contact resistance
measurement
5.1.2 Arrangement for dynamic stress tests
5.1.3 Arrangement for testing static load,
transverse
5.1.4 Arrangement for voltage proof and
polarization voltage
5.1.5 Arrangement for flammability test
5.2 Test schedule tables
5.2.1 Group P - Primary
5.2.2 Group A - Dynamic/Climatic
5.2.3 Group B - Mechanical endurance
5.2.4 Group C - Moisture
5.2.5 Group D - Electrical load
5.2.6 Group E - Mechanical resistivity
5.2.7 Group F - Chemical resistivity
5.2.8 Group G - Connections
6 Quality assessment procedures
6.1 Qualification approval
6.1.1 Method 1
6.1.2 Method 2
6.2 Quality conformance inspection
6.2.1 Lot-by-lot tests
6.2.2 Periodic tests
6.3 Delayed delivery, re-inspection
Annex A (normative) - Special contacts [theta] 4,8 mm
Annex B (informative) - Code numbers and colour references
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Committee |
EPL/48
|
DevelopmentNote |
Supersedes 97/230401 DC & BS QC480301XX0002(1995). (12/2001)
|
DocumentType |
Standard
|
Pages |
104
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 61076-4-101:2002 | Identical |
SN EN 61076-4-101 : 1998 | Identical |
DIN EN 61076-4-101:2002-09 | Identical |
IEC 61076-4-101:2001 | Identical |
EN 61076-4-101:2001 | Identical |
IEC 61076-4-101:2001/COR1:2003 | Identical |
IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
EN 60917-2-2:1996 | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
EN 61076-4:1996 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
EN 60352-5:2012/AC:2014 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
IEC 61076-4:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
IEC 60917-2-2:1994 | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units |
EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60917-1:1998+AMD1:2000 CSV | Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.