BS EN 61076-5:2001
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications In-line sockets with assessed quality. Sectional specification
Hardcopy , PDF
20-04-2012
English
15-11-2001
1 Scope and object
2 General
2.1 Normative references
2.2 Marking
2.3 Information to be given in a detail
specification
2.4 Standard values
2.5 Classification
2.5.1 Termination types
2.5.2 Contact style
2.5.3 Insulator body configuration
2.5.4 Decoupling capacitor
3 Quality assessment procedures
3.1 General
3.2 Primary stage of manufacturing
3.3 Structurally similar sockets
3.4 Lot-by-lot inspection tests
3.5 Periodic inspection tests
3.6 Alternative test methods
4 Test methods and procedures
4.1 General aspects
4.2 Pre-conditioning
4.3 Mounting of specimens
5 Supplementary test information
5.1 Test conditions
5.2 Mechanical tests
5.2.1 Mating force for all socket sizes
(insertion and withdrawal forces)
5.2.2 Mechanical operation
5.2.3 Contact retention
5.2.4 Vibration
5.2.5 Mechanical shock
5.2.6 Terminal strength (robustness of
terminations)
5.2.7 Solder wicking (under consideration)
5.3 Electrical tests
5.3.1 Insulation resistance
5.3.2 Voltage proof
5.3.3 Contact resistance - Millivolt level
method
5.3.4 Capacitance
5.3.5 Inductance (under consideration)
5.4 Environmental tests
5.4.1 Solderability
5.4.2 Resistance to soldering heat
5.4.3 Damp heat
5.4.4 Dry heat
5.4.5 Rapid change of temperature (thermal
shock)
5.4.6 Corrosive atmosphere or mixed flowing gas
or harsh environment (gas tightness)
5.4.7 Mould growth (fungus)
5.4.8 Porosity (under consideration)
5.4.9 Examination of dimensions and mass
5.4.10 Visual examination
6 Packaging requirements
6.1 Unit packing
7 Test schedule
7.1 General
7.1.1 Basic(minimum) test schedule
7.1.2 Full test schedule
Annex A (informative) - Terminology
Annex B (normative) - Test method for determination of
gas-tight characteristics for electrical
connectors, sockets and/or contact systems
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Covers sockets for packages with contacts having one of the following in-line formats - 1) Single in-line sockets; 2) Dual in-line sockets; 3) Quad in-line sockets; 4) Zig-zag in-line (staggered) sockets. Also describes a unified numbering system, functional levels, standard test methods and gauges for use in the examination of these sockets.
Committee |
EPL/48/-/2
|
DevelopmentNote |
Also numbered as IEC 61076-5 Supersedes 95/204855 DC (11/2001)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
British Standards Institution
|
Status |
Withdrawn
|
Supersedes |
This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and electronic equipment having a rated input current exceeding 16 A per phase. It covers equipment installed in residential areas as well as industrial machinery, specifically voltage dips and short interruptions for equipment connected to either 50 Hz or 60 Hz a.c. networks, including 1-phase and 3-phase mains. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to voltage dips, short interruptions and voltage variations. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of equipment or a system against a defined phenomenon. It has the status of a Basic EMC Publication in accordance with IEC Guide 107.
Standards | Relationship |
I.S. EN 61076-5:2002 | Identical |
NBN EN 61076-5 : 2002 | Identical |
NF EN 61076-5 : 2002 | Identical |
EN 61076-5 : 2001 | Identical |
DIN EN 61076-5:2002-04 | Identical |
IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
EN 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
IEC 60512-11-8:1995 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
IEC 60512-7:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
IEC 60512-11-14:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test |
IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
EN 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
IEC 60512-11-1:1995 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence |
IEC 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
IEC 60512-4:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests |
IEC 60512-9:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests |
IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.