BS EN 61987-14:2016
Current
The latest, up-to-date edition.
Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
31-07-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
Annex A (normative) - Operating list of properties for
temperature measuring equipment
Annex B (normative) - Device lists of properties for
temperature measuring equipment
Annex C (normative) - Property library
Annex D (normative) - Block library for considered
device types
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Gives an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for temperature measuring equipment and device lists of properties (DLOP) for the description of a range of contact and non-contact temperature measuring equipment types.
| Committee |
GEL/65/3
|
| DevelopmentNote |
Supersedes 15/30318557 DC. (08/2016)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of IEC 61987 provides
an operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for temperature measuring equipment and
device lists of properties (DLOP) for the description of a range of contact and non-contact temperature measuring equipment types
The structures of the OLOP and the DLOPs correspond to the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.
Aspects other than the OLOP, needed in different electronic data exchange processes described in IEC 61987-10, will be published in IEC 61987-921.
The locations of the libraries of properties and of blocks used in the LOPs concerned are listed in the Annexes C and D.
| Standards | Relationship |
| IEC 61987-14:2016 | Identical |
| EN 61987-14:2016 | Identical |
| NAMUR NE 100 : 2010 | USE OF LISTS OF PROPERTIES IN PROCESS CONTROL ENGINEERING WORKFLOWS |
| ISO/TS 15926-4:2007 | Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 4: Initial reference data |
| EN 61298-1:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS |
| EN 61360-5:2004 | Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema |
| EN 61360-2:2013 | Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| IEC 61298-1:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations |
| EN 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| IEC 61298-2:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions |
| EN 61298-2:2008 | PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| IEC 61987-1:2006 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| IEC 61987-11:2016 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of properties (LOPs) of measuring equipment for electronic data exchange - Generic structures |
| IEC 61360-2:2012 | Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema |
| IEC 61360-1:2017 | Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods |
| EN 60947-5-6:2000 | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| IEC 61298-3:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 13584-42:2010 | Industrial automation systems and integration — Parts library — Part 42: Description methodology: Methodology for structuring parts families |
| ISO 15926-2:2003 | Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 2: Data model |
| EN 61987-1:2007 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| I.S. CWA 15295:2005 | DESCRIPTION OF REFERENCES AND DATA MODELS FOR CLASSIFICATION |
| ISO 13584-25:2004 | Industrial automation systems and integration — Parts library — Part 25: Logical resource: Logical model of supplier library with aggregate values and explicit content |
| EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| IEC 61360-5:2004 | Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema |
| ISA TR20.00.01 : 2006 | SPECIFICATION FORMS FOR PROCESS MEASUREMENT AND CONTROL INSTRUMENTS - PART 1: GENERAL CONSIDERATIONS |
| IEC 61987-10:2009 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: List of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals |
| IEC 60947-5-6:1999 | Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.