• EN 61298-3:2008

    Current The latest, up-to-date edition.

    Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities

    Available format(s): 

    Language(s): 

    Published date:  20-11-2008

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General considerations
    5 Ambient temperature effects
    6 Ambient relative humidity effects
    7 Vibration
    8 Shock, drop and topple
    9 Mounting position
    10 Over-range
    11 Output load effects
    12 Power supply
    13 Superimposed voltages
    14 Harmonic distortion effects
    15 Magnetic field effects
    16 Electromagnetic field immunity test
    17 Electrostatic discharge
    18 Effect of open-circuited and short-circuited input
    19 Effect of open-circuited and short-circuited output
    20 Effects of process medium conditions
    21 Atmospheric pressure effects
    22 Flow of purge gas through the device
    23 Accelerated operational life test
    24 Operational long-term drift test (optional)
    Annex ZA (normative) - Normative references to international
                           publications with their corresponding
                           European publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    IEC 61298-3:2008 specifies general methods and procedures for conducting tests and reporting on the functional and performance characteristics of process measurement and control devices. The tests are applicable to any such devices characterized by their own specific input and output variables, and by the specific relationship (transfer function) between the inputs and outputs, and include analogue and digital devices. For devices that require special tests, this standard should be used, together with any product-specific standard specifying special tests. It covers tests for the effects of influence quantities.

    General Product Information - (Show below) - (Hide below)

    Committee CLC/TC 65X
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    CEI EN 60873-1 : 2005 ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIALPROCESS SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    CEI EN 60770-2 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    BS EN 60770-3:2014 Transmitters for use in industrial-process control systems Methods for performance evaluation of intelligent transmitters
    BS EN 61987-12:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
    I.S. EN 60770-3:2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 3: METHODS FOR PERFORMANCE EVALUATION OF INTELLIGENT TRANSMITTERS
    BS EN 60770-1:1999 Transmitters for use in industrial-process control systems Methods for performance evaluation
    I.S. EN 60546-1:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
    EN 60770-1:2011 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
    EN 61987-12:2016 Industrial- Process Measurement and Control - Data Structures and Elements in Process Equipment Catalogues - Part 12: Lists of properties (LOPs) for flow measuring equipment for electronic data exchange
    EN 61987-13:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 13: Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
    EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
    EN 61069-4:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance
    BS EN 61987-13:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for Pressure Measuring Equipment for electronic data exchange
    BS EN 61987-14:2016 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOP) for temperature measuring equipment for electronic data exchange
    I.S. EN 61003-2:2016 INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    I.S. EN 61003-1:2016 INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
    BS EN 61069-4:2016 Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system performance
    CEI EN 60546-1 : 2011 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
    I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
    CEI EN 60770-1 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    EN 61003-2:2016 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 2: Guidance for inspection and routine testing
    CEI EN 61003-2 : 2011 INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
    BS EN 61003-1:2016 Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs Methods for evaluating performance
    BS EN 61003-2:2016 Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs Guidance for inspection and routine testing
    CEI EN 61003-1 : 2005 INDUSTRIAL-PROCESS CONTROL SYSTEMS - INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS - PART 1: METHODS FOR EVALUATING PERFORMANCE
    BS EN 60873-1:2004 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems Methods for performance evaluation
    I.S. EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    I.S. EN 61987-14:2016 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 14: LISTS OF PROPERTIES (LOP) FOR TEMPERATURE MEASURING EQUIPMENT FOR ELECTRONIC DATA EXCHANGE
    BS EN 60770-2:2010 Transmitters for use in industrial-process control systems Methods for inspection and routine testing
    BS EN 60546-1:2010 Controllers with analogue signals for use in industrial-process control systems Methods of evaluating the performance
    BS EN 61514-2:2013 Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
    DIN EN 60546-1:2011-06 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
    I.S. EN 60873-1:2004 ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
    I.S. EN 60770-2:2010 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
    I.S. EN 61069-4:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 4: ASSESSMENT OF SYSTEM PERFORMANCE
    EN 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
    EN 60770-3:2014 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
    EN 60873-1:2004 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation
    EN 60546-1:2010 Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance
    EN 61003-1:2016 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance
    EN 61987-14:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 14: Lists of properties (LOP) for temperature measuring equipment for electronic data exchange

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61000-4-8 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
    IEC 60050-351:2013 International Electrotechnical Vocabulary (IEV) - Part 351: Control technology
    EN 60654-2:1997 Operating conditions for industrial-process measurement and control equipment - Part 2: Power
    EN 61298-1:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 1: GENERAL CONSIDERATIONS
    IEC 61326-3-2:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
    IEC 61298-1:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    IEC 61298-2:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
    EN 61298-2:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 2: TESTS UNDER REFERENCE CONDITIONS
    EN 61000-4-11:2004/A1:2017 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017)
    EN 61298-4:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content
    EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    IEC 61326-2-5:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1
    IEC 61326-2-3:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
    EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    IEC 61326-3-2 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT
    IEC 61326-3-1 : 2.0 ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
    IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
    IEC 61000-4-4:2012 RLV Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
    EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
    EN 60654-3:1997 Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences
    EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    EN 60654-1 : 1993 Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
    IEC 61298-4:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content
    EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
    EN 61000-4-4:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012)
    IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
    EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
    IEC 60654-1:1993 Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
    EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    IEC 60050-300:2001 International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
    IEC 61326-3-1:2017 Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
    IEC 60654-3:1983 Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences
    EN 60068-2-31:2008 ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
    IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective