BS EN 71-1 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
Available format(s)
Hardcopy , PDF
Superseded date
20-06-2019
Superseded by
Published date
01-01-2014
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Toys intended for children under 36 months
6 Packaging
7 Warnings, markings and instructions for use
8 Test methods
Annex A (informative) - Background and rationale for
this European Standard
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements or
other provisions of EU Directives
Bibliography
Describes requirements and methods of tests for mechanical and physical properties of toys.
| Committee |
CW/15
|
| DevelopmentNote |
Supersedes 00/702973 DC, 97/716050 DC, BS 5665-1(1989) & BS PD6530(1992), 01/705066 DC, 02/707944 DC, 05/30133728 DC, 07/30167658 DC & 07/30168398 DC, BS EN 71-6 & BS 5665-6(1995), 12/30259067 DC & 12/30265741 DC.(10/2013) Supersedes 12/30265744 DC. (04/2014) Supersedes 14/30301841 DC. (12/2014)
|
| DocumentType |
Standard
|
| Pages |
154
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
|
| Standards | Relationship |
| NBN EN 71-1 : 2015 | Identical |
| NF EN 71-1 : 2014 | Identical |
| NEN EN 71-1 : 2014 | Identical |
| ONORM EN 71-1 : 2015 | Identical |
| EN 71-1 : 2018 | Identical |
| UNE-EN 71-1:2015 | Identical |
| DIN EN 71-1:2015-02 | Identical |
| UNI EN 71-1 : 2015 | Identical |
| SN EN 71-1 : 2015 | Identical |
| NS EN 71-1 : 2014 | Identical |
| I.S. EN 71-1:2014 | Identical |
| EN 71-1:2014 | Identical |
| 94/304105 DC : DRAFT MAR 1994 | PREN 1400 - CHILD CARE ARTICLES - SOOTHERS FOR BABIES AND YOUNG CHILDREN - SAFETY REQUIREMENTS AND TEST METHODS |
| BS 8510:2009 | Child use and care articles. Safety of children\'s sleep bags. Safety requirements and test methods |
| BS 8433:2004 | Microwavable personal warmers. Specification |
| BS PAS 66(2009) : 2009 | OFFICIAL IDENTIFICATION EARTAGS FOR SHEEP AND GOATS - SPECIFICATION |
| 08/30168262 DC : DRAFT MAR 2008 | BS 8509 - CHILDREN'S BEDS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TEST METHODS |
| BS 8423(2010) : 2010 | FIREGUARDS FOR FIRES AND HEATING APPLIANCES FOR DOMESTIC USE - SPECIFICATION |
| 09/30203024 DC : 0 | BS 8423 - FIREGUARDS FOR FIRES AND HEATING APPLIANCES FOR DOMESTIC USE - SPECIFICATION |
| BS 7972(2001) : 2001 | SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S BEDGUARDS FOR DOMESTIC USE |
| 06/30134942 DC : DRAFT FEB 2006 | BS 1970 - HOT WATER BOTTLES MANUFACTURED FROM RUBBER AND PVC - SPECIFICATION |
| BS 8509(2008) : 2008 | CHILDREN'S BEDS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TEST METHODS |
| BS 7272-2(2008) : 2008 | WRITING AND MARKING INSTRUMENTS - PART 2: SPECIFICATION FOR END CLOSURES TO REDUCE THE RISK OF ASPHYXIATION |
| BS 8423:2002 | Fireguards for fires and heating appliances for domestic use. Specification |
| 11/30209219 DC : 0 | BS 1877-10 - DOMESTIC BEDDING - PART 10: SPECIFICATION FOR MATTRESSES AND BUMPERS FOR CHILDREN'S COTS, PERAMBULATORS AND SIMILAR DOMESTIC ARTICLES |
| BS 7907:2007 | Code of practice for the design and manufacture of children\'s clothing to promote mechanical safety |
| BS 1970:2006 | Hot water bottles manufactured from rubber and PVC. Specification |
| BS 8613:2017 | Finger protection devices for pedestrian doors. Specification Safety requirements and test methods |
| BS 1970:2012 | Hot water bottles manufactured from rubber and PVC. Specification |
| 04/100949 DC : DRAFT JAN 2004 | BS 8433 - MICROWAVABLE PERSONAL WARMERS - SPECIFICATION |
| 14/30295321 DC : 0 | BS 7272-2+A1 - WRITING AND MARKING INSTRUMENTS - PART 2: SPECIFICATION FOR END CLOSURES TO REDUCE THE RISK OF ASPHYXIATION |
| 08/30168264 DC : DRAFT MAR 2008 | BS 8510 - CHILD USE AND CARE ARTICLES - SAFETY OF CHILDREN'S SLEEP BAGS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS PP7321(2004) : 2004 | DESIGN AND TECHNOLOGY - COMPENDIUM OF BRITISH STANDARDS FOR TEACHERS OF DESIGN AND TECHNOLOGY IN SCHOOLS AND COLLEGES |
| 09/30203020 DC : 0 | BS 7972 AMD 1 - SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S BEDGUARDS FOR DOMESTIC USE |
| BS 1877-10(2011) : 2011 | DOMESTIC BEDDING - PART 10: SPECIFICATION FOR MATTRESSES AND BUMPERS FOR CHILDREN'S COTS, PERAMBULATORS AND SIMILAR DOMESTIC ARTICLES |
| EN 13899:2003 | Roller sports equipment - Roller skates - Safety requirements and test methods |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| IEC 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 8098:2014 | Cycles — Safety requirements for bicycles for young children |
| EN 15649-3:2009+A1:2012 | Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices |
| CEN/TR 13387:2004 | Child use and care articles - Safety guidelines |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
| CR 14379:2002 | Classification of toys - Guidelines |
| EN 62115:2005/A12:2015 | ELECTRIC TOYS - SAFETY (IEC 62115:2003 + A1:2004, MODIFIED) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| IEC 62115:2017 | Electric toys - Safety |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 13843:2009 | Roller sports equipment - Inline-skates - Safety requirements and test methods |
| 765/2008 : 2008 COR 1 2015 | REGULATION (EC) NO 765/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 JULY 2008 SETTING OUT THE REQUIREMENTS FOR ACCREDITATION AND MARKET SURVEILLANCE RELATING TO THE MARKETING OF PRODUCTS AND REPEALING REGULATION (EEC) NO 339/1993 (TEXT WITH EEA RELEVANCE) |
| ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 14619:2015 | Roller sports equipment - Kick scooters - Safety requirements and test methods |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
| CEN/CLC Guide 11:2012 | Product information relevant to consumers - Guidelines for standard developers |
| IEC TS 60318-7:2017 | Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of air-conduction hearing aids |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 13613:2009 | Roller sports equipment - Skateboards - Safety requirements and tests methods |
| EN 60318-4:2010 | Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.