BS EN 754-8:2016
Current
The latest, up-to-date edition.
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Porthole tubes, tolerances on dimensions and form
Hardcopy , PDF
English
30-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Tolerances on dimensions
4 Tolerances on form
Annex A (informative) - Wall thickness variation (eccentricity)
Bibliography
Defines the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn porthole tubes with an outside diameter (OD) from 3 mm to 350 mm or with a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm, supplied in straight lengths.
| Committee |
NFE/35
|
| DevelopmentNote |
Supersedes BS 1471(1972). Partially supersedes BS 1474(1987), BS 4300-4(1973), BS 4300-12 (1969) and BS 4300-15(1973). Supersedes 95/711134 DC. (06/2004) Supersedes 06/30136542 DC. (04/2008)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn porthole tubes with an outside diameter ( OD) from 3mm to 350mm (round tube, see Figure1) or with a cross section contained within a circumscribing circle ( CD) from 8mm to 300mm (other than round tube, see Figure2), supplied in straight lengths. This document only applies to cold drawn tube for general engineering applications made in the following alloys: ENAW‑1050A , ENAW‑1200 ; ENAW‑3003 , ENAW‑3103 ; ENAW‑5005 , ENAW‑5005A , ENAW‑5049 , ENAW‑5251 , ENAW‑5052 ; ENAW‑6012 , ENAW‑6060 , ENAW‑6061 , ENAW‑6262 , ENAW‑6262A ; ENAW‑6063 , ENAW‑6063A , ENAW‑6065 , ENAW‑6082 ; ENAW‑7020 . The temper designations used in this part are according to EN515 . This document only applies to tube produced by the porthole/bridge method of extrusion only (and then cold drawn to the final dimensions). This document does not apply to: cold drawn tubes produced by the seamless, die/mandrel method ( EN754‑7 ), tubes delivered in coils ( EN13958 ), coiled tubes cut to length ( EN13958 ). [Image removed.] [Image removed.]
| Standards | Relationship |
| EN 754-8:2016 | Identical |
| NS EN 754-8 : 2ED 2008 | Identical |
| NBN EN 754-8 : 2016 | Identical |
| SN EN 754-8 : 2016 | Identical |
| DIN EN 754-8:2016-10 | Identical |
| I.S. EN 754-8:2016 | Identical |
| NF EN 754-8 : 2016 | Identical |
| UNI EN 754-8 : 2008 | Identical |
| UNE-EN 754-8:2016 | Identical |
| NEN EN 754-8 : 2016 | Identical |
| BS 336:2010 | Specification for fire hose couplings and ancillary equipment |
| BS PD5500(2006) : 2006 | SPECIFICATION FOR UNFIRED FUSION WELDED PRESSURE VESSELS |
| BS 6349-1:2000 | Maritime structures Code of practice for general criteria |
| EN 754-7:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 13958:2008 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.