BS 5290:1976
|
Determination of lead content of gasoline. Volumetric chromate method |
BS 882:1992
|
Specification for aggregates from natural sources for concrete |
BS 8004:1986
|
Code of practice for foundations |
BS EN 603-2:1997
|
Aluminium and aluminium alloys. Wrought forging stock Mechanical properties |
BS 8118-2(1991) : 1991
|
STRUCTURAL USE OF ALUMINIUM - PART 2: SPECIFICATION FOR MATERIALS, WORKMANSHIP AND PROTECTION |
BS EN 12165:2011
|
Copper and copper alloys. Wrought and unwrought forging stock |
BS EN 772-7:1998
|
Methods of test for masonry units Determination of water absorption of clay masonry damp proof course units by boiling in water |
BS EN 755-4:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Square bars, tolerances on dimensions and form |
BS EN 755-8:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Porthole tubes, tolerances on dimensions and form |
BS 916:1953
|
Specification for black bolts, screws and nuts, hexagon and square, with B.S.W. threads, and partly machined bolts, screws and nuts, hexagon and square, with B.S.W. or B.S.F. threads |
BS EN 12167:2011
|
Copper and copper alloys. Profiles and bars for general purposes |
BS 8118-1:1991
|
STRUCTURAL USE OF ALUMINUM - CODE OF PRACTICE FOR DESIGN |
BS 5391-1:1976
|
Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe Pipe for industrial uses |
DD ENV 1992-1.1 : DRAFT MAY 1992
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - GENERAL RULES FOR BUILDINGS (TOGETHER WITH UNITED KINGDOM NATIONAL APPLICATION DOCUMENT) |
ASTM C 88 : 2013-08
|
TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
BS EN 586-2:1994
|
Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
BS 3294-1:1960
|
Specification for the use of high strength friction grip bolts in structural steelwork. General grade bolts |
BS DD175(1988) : 1988
|
CODE OF PRACTICE FOR THE IDENTIFICATION OF POTENTIALLY CONTAMINATED LAND AND ITS INVESTIGATION |
BS 7613:1994
|
Specification for hot rolled quenched and tempered weldable structural steel plates |
BS 1199 & 1200(1976) : 1976 AMD 5126
|
SPECIFICATIONS FOR BUILDING SANDS FROM NATURAL SOURCES |
BS 1210:1963
|
Specification for wood screws |
BS EN 754-2:2016
|
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Mechanical properties |
BS EN 604-1:1997
|
Aluminium and aluminium alloys. Cast forging stock Technical conditions for inspection and delivery |
BS 1370:1979
|
Specification for low heat Portland cement |
BS EN 754-8:2016
|
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Porthole tubes, tolerances on dimensions and form |
BS 6031:1981
|
Code of practice for earthworks |
DD ENV 206:1992
|
Concrete. Performance, production, placing and compliance criteria |
BS EN 755-7:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Seamless tubes, tolerances on dimensions and form |
BS EN 10113-3:1993
|
Hot-rolled products in weldable fine grain structural steels Delivery conditions for thermomechanical rolled steels |
BS 5392-1:1976
|
Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe Fittings for use with pipe for industrial uses |
BS EN 485-4:1994
|
Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
BS EN 573-1:2004
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
BS 5567:1978
|
Specification for apertures in tinplate containers to receive plug-in plastics closures |
BS EN 10155:1993
|
Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions |
BS EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
BS 8007:1987
|
CODE OF PRACTICE FOR DESIGN OF CONCRETE STRUCTURES FOR RETAINING AQUEOUS LIQUIDS |
BS 105:1919
|
Light and heavy bridge type railway rails |
BS 6588:1996
|
Specification for Portland pulverized-fuel ash cements |
BS EN 969:2009
|
Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods |
BS CP3:CH5-2(1972) : AMD 7908
|
CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - WIND LOADS |
BS EN 573-2:1995
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
BS EN 755-6:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Hexagonal bars, tolerances on dimensions and form |
BS 1579:1960
|
Specification for connectors for timber |
BS 5400-2:1978
|
Steel, concrete and composite bridges Specification for loads |
BS EN 1744-1 : 2009
|
TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
BS EN 586-1:1998
|
Aluminium and aluminium alloys. Forgings Technical conditions for inspection and delivery |
BS 3796(1970) : LATEST
|
POLYTHENE PIPE (TYPE 50) FOR GENERAL PURPOSES INCLUDING CHEMICAL AND FOOD INDUSTRY USES |
BS 4449:1997
|
Specification for carbon steel bars for the reinforcement of concrete |
BS 4976:1973
|
Specification for polytetrafluoroethylene (PTFE) tubing extruded from coagulated dispersion powder. Metric and imperial units |
BS EN 598 : 2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
BS EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS 7668:1994
|
Specification for weldable structural steels. Hot finished structural hollow sections in weather resistant steels |
BS 1490:1988
|
Specification for aluminium and aluminium alloy ingots and castings for general engineering purposes |
BS EN 573-3:2013
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 485-3:2003
|
Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
BS 4844:1986
|
Specification for abrasion resisting white cast iron |
BS EN 1367-2:2009
|
Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
BS EN 499:1995
|
Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification |
PREN 206 : DRAFT 2012
|
CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
BS EN 603-1:1997
|
Aluminium and aluminium alloys. Wrought forging stock Technical conditions for inspection and delivery |
BS CP3:CH5-1(1967) : LATEST
|
CODE OF BASIC DATA FOR THE DESIGN OF BUILDINGS - LOADING - DEAD AND IMPOSED LOADS |
DD ENV 1991-1:1996
|
Eurocode 1. Basis of design and actions on structures Basis of design (together with United Kingdom national application document) |
BS 5911-103:1994
|
Precast concrete pipes, fittings and ancillary products Specification for prestressed non-pressure pipes and fittings with flexible joints |
BS 3468:1986
|
Specification for austenitic cast iron |
BS EN 755-3:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Round bars, tolerances on dimensions and form |
BS EN 515:2017
|
Aluminium and aluminium alloys. Wrought products. Temper designations |
BS 1881-124:1988
|
Testing concrete Methods for analysis of hardened concrete |
BS EN 485-2:2013
|
Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
BS EN 755-1:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
BS EN 12166:2011
|
Copper and copper alloys. Wire for general purposes |
BS 2760:1973
|
Specification for pitch-impregnated fibre pipes and fittings for below and above ground drainage |
BS EN 754-7:2016
|
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Seamless tubes, tolerances on dimensions and form |
BS EN 1301-3:2008
|
Aluminium and aluminium alloys. Drawn wire Tolerances on dimensions |
BS EN 754-1:2016
|
Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
BS EN 755-2:2016
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
BS EN 772-3:1998
|
Methods of test for masonry units Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing |
BS 5409-1:1976
|
Specification for nylon tubing Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations |
BS 7543:2003
|
Guide to durability of buildings and building elements, products and components |
PD 6484:1979
|
Commentary on corrosion at bimetallic contacts and its alleviation |
BS 6073-1:1981
|
Precast concrete masonry units Specification for precast concrete masonry units |
BS 6349-2:1988
|
Maritime structures Design of quay walls, jetties and dolphins |
BS EN 485-1 : 2008
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 573-4:2004
|
Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
BS 3410:1961
|
Specification for metal washers for general engineering purposes |
BS 11:1985
|
Specification for railway rails |
BS EN 10113-2:1993
|
Hot-rolled products in weldable fine grain structural steels Delivery conditions for normalized/normalized rolled steels |
BS EN 755-5:2008
|
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Rectangular bars, tolerances on dimensions and form |
BS EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
BS EN 932-6:1999
|
Tests for general properties of aggregates Definitions of repeatability and reproducibility |
BS EN 1301-1:2008
|
Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
BS 4027:1996
|
Specification for sulfate-resisting Portland cement |
BS 7361-1:1991
|
Cathodic protection Code of practice for land and marine applications |
BS EN 12163:2011
|
Copper and copper alloys. Rod for general purposes |
BS EN 1401-1:2009
|
Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
BS 449-2:1969
|
Specification for the use of structural steel in building Metric units |
BS EN 1301-2:2008
|
Aluminium and aluminium alloys. Drawn wire Mechanical properties |
BS EN 12164:2011
|
Copper and copper alloys. Rod for free machining purposes |
BS 6399-1:1996
|
LOADING FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DEAD AND IMPOSED LOADS |
BS 1211:1958
|
Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage |
BS 5480:1990
|
Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
BS 534:1990
|
Specification for steel pipes, joints and specials for water and sewage |