BS EN 934-5:2007
Current
The latest, up-to-date edition.
Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling
Hardcopy , PDF
English
30-11-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
3.1 General definitions
3.2 Specific definitions
4 Requirements
4.1 General requirements
4.2 Specific requirements
5 Sampling
6 Conformity control
7 Evaluation of conformity
8 Marking and labelling
8.1 General
8.2 Designation of admixtures
8.3 Additional information
Annex A (informative) - Content and release of dangerous
substances
Annex B (normative) - Reference concrete for testing consistence
control admixture
B.1 General
B.2 Cement content
B.3 Aggregates
B.4 Consistence
B.5 Compressive strength
B.6 Test report
Annex C (normative) - Measurement of tensile bond strength
C.1 General
C.2 Preparation of the control and test mix
C.3 Applying the concrete and storage of specimens
C.4 Testing
C.5 Test report
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directive
ZA.1 Scope and relevant characteristics
ZA.2 Procedure for attestation of conformity of admixtures
for sprayed concrete
ZA.2.1 System of attestation of conformity
ZA.2.2 EC certificate and declaration of conformity
ZA.3 CE marking and labelling
Bibliography
Describes requirements and conformity for admixtures specifically intended for use in sprayed concrete.
| Committee |
B/517/3
|
| DevelopmentNote |
Supersedes 98/109830 DC & 03/310129 DC. (11/2007)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 934-5:2007 | Identical |
| UNI EN 934-5 : 2008 | Identical |
| NBN EN 934-5 : 2008 | Identical |
| NS EN 934-5 : 1ED 2007 | Identical |
| I.S. EN 934-5:2007 | Identical |
| DIN EN 934-5:2008-02 | Identical |
| NF EN 934-5 : 2007 | Identical |
| NEN EN 934-5 : 2007 | Identical |
| BS PAS 8810(2016) : 2016 | TUNNEL DESIGN - DESIGN OF CONCRETE SEGMENTAL TUNNEL LININGS - CODE OF PRACTICE |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| EN 480-6:2005 | Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis |
| EN 480-10:2009 | Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN ISO 1158:1998 | Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998) |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 480-14:2006 | Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 480-1:2014 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| ISO 758:1976 | Liquid chemical products for industrial use — Determination of density at 20 degrees C |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| ISO 1158:1998 | Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content |
| EN 480-12:2005 | Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures |
| EN 480-8:2012 | Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content |
| ISO 4316:1977 | Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 480-2:2006 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.