BS EN ISO 12215-3:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Small craft. Hull construction and scantlings Materials. Steel, aluminium alloys, wood, other materials
Hardcopy , PDF
04-01-2019
English
12-07-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for metal
5 Requirements for wood
6 Requirements for other materials
7 Documentation
8 Owner's manual
Annex A (normative) Information to be provided in the owner's manual
Bibliography
Specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages.
| Committee |
GME/33
|
| DevelopmentNote |
Supersedes 00/715270 DC (07/2002) Reviewed and confirmed by BSI, November 2007. (10/2007)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 12215-3:2002 | Identical |
| DIN EN ISO 12215-3:2002-09 | Identical |
| NEN EN ISO 12215-3 : 2002 | Identical |
| NF EN ISO 12215-3 : 2002 | Identical |
| NS EN ISO 12215-3 : 1ED 2002 | Identical |
| SN EN ISO 12215-3 : 2002 | Identical |
| UNI EN ISO 12215-3 : 2003 | Identical |
| EN ISO 12215-3:2002 | Identical |
| UNE-EN ISO 12215-3:2003 | Identical |
| ONORM EN ISO 12215-3 : 2002 | Identical |
| I.S. EN ISO 12215-3:2002 | Identical |
| DEFSTAN 80-31/4(2005) : 2005 | PAINT, FINISHING, GENERAL SERVICE ALUMINIUM TYPE: BRUSHING OR SPRAYING |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition |
| ISO 3348:1975 | Wood — Determination of impact bending strength |
| ISO 2300:1973 | Sawn timber of broadleaved species Defects Terms and definitions |
| ISO 6362-2:2014 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties |
| ISO 8905:1988 | Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain |
| ISO 2299:1973 | Sawn timber of broadleaved species — Defects — Classification |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 3130:1975 | Wood — Determination of moisture content for physical and mechanical tests |
| ISO 1031:1974 | Coniferous sawn timber — Defects — Terms and definitions |
| ISO 4476:1983 | Coniferous and broadleaved sawlogs — Sizes — Vocabulary |
| ISO 3346:1975 | Wood — Determination of ultimate tensile stress perpendicular to grain |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 3132:1975 | Wood — Testing in compression perpendicular to grain |
| ISO 2301:1973 | Sawn timber of broadleaved species — Defects — Measurement |
| ISO 8906:1988 | Sawn timber — Test methods — Determination of resistance to local transverse compression |
| ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
| ISO 3133:1975 | Wood — Determination of ultimate strength in static bending |
| ISO 6361-2:2014 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties |
| ISO 1098:1975 | Veneer plywood for general use General requirements |
| ISO 12215-4:2002 | Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing |
| ISO 3347:1976 | Wood — Determination of ultimate shearing stress parallel to grain |
| ISO 3349:1975 | Wood — Determination of modulus of elasticity in static bending |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| EN ISO 12215-4:2002 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| ISO 3131:1975 | Wood — Determination of density for physical and mechanical tests |
| ISO 1032:1974 | Coniferous sawn timber Sizes Terms and definitions |
| ISO 1029:1974 | Coniferous sawn timber — Defects — Classification |
| ISO 4474:1989 | Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions |
| ISO 2074:2007 | Plywood Vocabulary |
| ISO 1096:2014 | Plywood Classification |
| ISO 3129:2012 | Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| ISO 3345:1975 | Wood — Determination of ultimate tensile stress parallel to grain |
| ISO 9086-1:1987 | Wood Methods of physical and mechanical testing Vocabulary Part 1: General concepts and macrostructure |
| ISO 3787:1976 | Wood — Test methods — Determination of ultimate stress in compression parallel to grain |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.