ASTM D 5162 : 2015 : REDLINE
|
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
|
ISO 8502-3:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
ISO 2812-2:2007
|
Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
|
ISO 8502-4:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations
|
ISO 815-2:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures
|
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method
|
NACE SP 01 88 : 2006
|
DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
|
ASTM D 429 : 2014 : REDLINE
|
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
|
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
|
ASTM D 1141 : 1998 : EDT 1
|
Standard Practice for the Preparation of Substitute Ocean Water
|
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
|
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
|
ASTM D 4417 : 2014 : REDLINE
|
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
|
ASTM D 2084 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER
|
BS 903-5:2004
|
Physical testing of rubber Guide to the application of rubber testing to finite element analysis
|
ASTM D 4285 : 1983 : R2018
|
Standard Test Method for Indicating Oil or Water in Compressed Air
|
ISO 6502:2016
|
Rubber Guide to the use of curemeters
|
ISO 8502-5:1998
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
|
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
|
ISO 9004:2009
|
Managing for the sustained success of an organization A quality management approach
|
EN 12664:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
|
ISO 29601:2011
|
Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film
|
ISO 10474:2013
|
Steel and steel products — Inspection documents
|
ASTM D 5894 : 2016 : REDLINE
|
Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
|
ASTM E 337 : 2015 : REDLINE
|
Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
|
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
|
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
SSPC-SP 6 : 2015
|
COMMERCIAL BLAST CLEANING
|
ASTM G 42 : 2011 : REDLINE
|
TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES
|
ISO 9001:2015
|
Quality management systems — Requirements
|
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
|
SSPC-AB 2 : 2015
|
CLEANLINESS OF RECYCLED FERROUS METALLIC ABRASIVES
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary
|
ASTM D 257 : 2014 : REDLINE
|
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
|
ISO 8502-6:2006
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
|
ISO 8502-2:2017
|
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
ISO 21457:2010
|
Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
|
ISO 8502-9:1998
|
Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts
|
ISO 8504-2:2000
|
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
|
ISO 8503-4:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
|
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
|
NACE RP 02 87 : 2002
|
FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE
|
ISO 1629:2013
|
Rubber and latices — Nomenclature
|
ISO 8503-5:2017
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
|
ISO 814:2017
|
Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method
|
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
|