• Shopping Cart
    There are no items in your cart

BS EN ISO 5667-3:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Water quality. Sampling Preservation and handling of water samples

Available format(s)

Hardcopy , PDF

Superseded date

26-06-2018

Superseded by

BS EN ISO 5667-3:2018

Language(s)

English

Published date

31-12-2012

€322.53
Excluding VAT

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling and chain of custody
5 Reagents and materials
6 Containers
7 Sample handling and preservation
8 Sample transport
9 Identification of samples
10 Sample reception
11 Sample storage
Annex A (informative) - Techniques for sample
        preservation
Annex B (informative) - Container preparation
Annex C (informative) - Protocol as used in Dutch
        validation studies
Bibliography

Sets up general requirements for sampling, preservation, handling, transport and storage of all water samples including those for biological analyses.

Committee
EH/3/6
DevelopmentNote
Supersedes BS 6068-6.3(1986), 92/50315 DC and BS 6068-6.3(1996) (12/2003) Supersedes 02/560594 DC (01/2004) Supersedes BS 6068-6.3(2003) & 10/30201950 DC. (12/2012)
DocumentType
Standard
Pages
54
PublisherName
British Standards Institution
Status
Superseded
SupersededBy
Supersedes

BS 6068-2.50:1995 Water quality. Physical, chemical and biochemical methods Determination of pH
BS 5930:2015+A1:2020 Code of practice for ground investigations
BS 10175:2001 Investigation of potentially contaminated sites. Code of practice
10/30205348 DC : 0 BS 10175 - INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE
14/30282433 DC : 0 BS 8554 - CODE OF PRACTICE FOR THE SAMPLING AND MONITORING OF HOT AND COLD WATER SERVICES IN BUILDINGS
BS 8515(2009) : 2009 RAINWATER HARVESTING SYSTEMS - CODE OF PRACTICE
BS 10175(2011) : 2011 INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE
BS 1427:2009 Guide to on-site test methods for the analysis of waters
BS 8552:2012 Sampling and monitoring of water from building services closed systems. Code of practice
BS 8554:2015 Code of practice for the sampling and monitoring of hot and cold water services in buildings
11/30228295 DC : 0 BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806
BS 8558:2011 Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806
BS 22475-2:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements Qualification criteria for enterprises and personnel
BS 6068-2.53(1997) : 1997 WATER QUALITY - PHYSICAL, CHEMICAL AND BIOCHEMICAL METHODS - DETERMINATION OF DISSOLVED ANIONS BY LIQUID CHROMATOGRAPHY OF IONS - DETERMINATION OF BROMIDE, CHLORIDE, NITRATE, NITRITE, ORTHOPHOSPHATE AND SULFATE IN WASTE WATER
BS PAS 61(2006) : 2006 DETERMINATION OF PRIORITY POLLUTANTS IN SURFACE WATER USING PASSIVE SAMPLING
BS EN ISO 10304-2:1997 Water quality. Determination of dissolved anions by liquid chromatography of ions Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
12/30215289 DC : 0 BS 8552 - SAMPLING AND MONITORING OF WATER FROM BUILDING SERVICES CLOSED SYSTEMS - CODE OF PRACTICE
PD 855468:2015 Guide to the flushing and disinfection of services supplying water for domestic use within buildings and their curtilages
08/30166603 DC : DRAFT MAR 2008 BS 1427 - GUIDE TO ON-SITE TEST METHODS FOR THE ANALYSIS OF WATERS
BS 5930:2015 Code of practice for ground investigations

ISO 23913:2006 Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection
ISO 18412:2005 Water quality — Determination of chromium(VI) — Photometric method for weakly contaminated water
ISO 14402:1999 Water quality Determination of phenol index by flow analysis (FIA and CFA)
ISO 10359-2:1994 Water quality Determination of fluoride Part 2: Determination of inorganically bound total fluoride after digestion and distillation
ISO 9377-2:2000 Water quality Determination of hydrocarbon oil index Part 2: Method using solvent extraction and gas chromatography
ISO 5663:1984 Water quality — Determination of Kjeldahl nitrogen — Method after mineralization with selenium
ISO 11074:2015 Soil quality — Vocabulary
ISO 7980:1986 Water quality Determination of calcium and magnesium Atomic absorption spectrometric method
ISO 18857-1:2005 Water quality — Determination of selected alkylphenols — Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
ISO 29441:2010 Water quality Determination of total nitrogen after UV digestion Method using flow analysis (CFA and FIA) and spectrometric detection
ISO 9439:1999 Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test
ISO 11969:1996 Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique)
ISO 8467:1993 Water quality — Determination of permanganate index
ISO 16264:2002 Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection
ISO 19458:2006 Water quality Sampling for microbiological analysis
ISO 10566:1994 Water quality Determination of aluminium Spectrometric method using pyrocatechol violet
ISO 10304-4:1997 Water quality Determination of dissolved anions by liquid chromatography of ions Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
ISO 5961:1994 Water quality Determination of cadmium by atomic absorption spectrometry
ISO 15681-1:2003 Water quality — Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) — Part 1: Method by flow injection analysis (FIA)
ISO 18856:2004 Water quality — Determination of selected phthalates using gas chromatography/mass spectrometry
ISO 10304-3:1997 Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
ISO 11732:2005 Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection
ISO 15682:2000 Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection
ISO 17852:2006 Water quality Determination of mercury Method using atomic fluorescence spectrometry
ISO 12846:2012 Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment
ISO 9964-3:1993 Water quality — Determination of sodium and potassium — Part 3: Determination of sodium and potassium by flame emission spectrometry
ISO 8245:1999 Water quality Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
ISO 11423-2:1997 Water quality — Determination of benzene and some derivatives — Part 2: Method using extraction and gas chromatography
ISO 11423-1:1997 Water quality — Determination of benzene and some derivatives — Part 1: Head-space gas chromatographic method
ISO 5814:2012 Water quality — Determination of dissolved oxygen — Electrochemical probe method
ISO 9963-1:1994 Water quality Determination of alkalinity Part 1: Determination of total and composite alkalinity
ISO 8165-1:1992 Water quality — Determination of selected monovalent phenols — Part 1: Gas-chromatographic method after enrichment by extraction
ISO 17993:2002 Water quality — Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
ISO 15061:2001 Water quality — Determination of dissolved bromate — Method by liquid chromatography of ions
ISO 15681-2:2003 Water quality Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) Part 2: Method by continuous flow analysis (CFA)
ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
ISO 18857-2:2009 Water quality Determination of selected alkylphenols Part 2: Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in non-filtered samples following solid-phase extraction and derivatisation
ISO 21458:2008 Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) and fluorometric detection
EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
ISO 13395:1996 Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
ISO 10359-1:1992 Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water
ISO 28540:2011 Water quality — Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water — Method using gas chromatography with mass spectrometric detection (GC-MS)
ISO 15705:2002 Water quality Determination of the chemical oxygen demand index (ST-COD) Small-scale sealed-tube method
ISO 15586:2003 Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace
ISO 17353:2004 Water quality — Determination of selected organotin compounds — Gas chromatographic method
ISO 7888:1985 Water quality — Determination of electrical conductivity
ISO 7887:2011 Water quality — Examination and determination of colour
ISO 15680:2003 Water quality — Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
ISO 9562:2004 Water quality — Determination of adsorbable organically bound halogens (AOX)
ISO 12020:1997 Water quality — Determination of aluminium — Atomic absorption spectrometric methods
ISO 11369:1997 Water quality — Determination of selected plant treatment agents — Method using high performance liquid chromatography with UV detection after solid-liquid extraction
ISO 6878:2004 Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method
ISO 15913:2000 Water quality Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization
ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
ISO 10523:2008 Water quality — Determination of pH
ISO 6468:1996 Water quality — Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes — Gas chromatographic method after liquid-liquid extraction
ISO 10260:1992 Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll-a concentration
ISO Guide 34:2009 General requirements for the competence of reference material producers
ISO 10695:2000 Water quality Determination of selected organic nitrogen and phosphorus compounds Gas chromatographic methods
ISO 17294-2:2016 Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
ISO 14911:1998 Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water
ISO 8165-2:1999 Water quality Determination of selected monovalent phenols Part 2: Method by derivatization and gas chromatography
ISO 7027:1999 Water quality Determination of turbidity

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.