BS ISO 15001 : 2003 AMD 15145
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
24-06-2004
23-11-2012
Foreword
Introduction
1 R Scope
2 Normative references
3 Terms and definitions
4 Cleanliness
5 R Resistance to ignition
6 Risk analysis
Annex A (informative) Examples of cleaning procedures
Annex B (informative) Typical methods for validation of
cleaning procedures
Annex C (informative) Design considerations
Annex D (informative) Selection of materials
Annex E (informative) Recommended method for combustion
and quantitative analysis of combustion products
of non-metallic materials
Annex F (informative) Rationale
Bibliography
Specifies minimum requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications which can come in contact with oxygen in normal condition or in single fault condition at gas pressures grater than 50 kPa.
| Committee |
CH/121/6
|
| DevelopmentNote |
Supersedes 98/564339 DC (06/2003) Renumbered and superseded by BS EN ISO 15001. (06/2004)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 15001:2010 | Identical |
| ISO 4589-3:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
| ISO/TR 9122-4:1993 | Toxicity testing of fire effluents Part 4: The fire model (furnaces and combustion apparatus used in small-scale testing) |
| ISO/TR 9122-1:1989 | Toxicity testing of fire effluents Part 1: General |
| MIL-STD-1359 Revision B:1987 | CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO/TR 9122-5:1993 | Toxicity testing of fire effluents Part 5: Prediction of toxic effects of fire effluents |
| ISO/TR 9122-2:1990 | Toxicity testing of fire effluents Part 2: Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology) |
| ISO 10298:2010 | Determination of toxicity of a gas or gas mixture |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| ISO/TR 9122-3:1993 | Toxicity testing of fire effluents — Part 3: Methods for the analysis of gases and vapours in fire effluents |
| ASTM G 122 : 1996 | Standard Test Method for Evaluating the Effectiveness of Cleaning Agents |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| ASTM G 72 : 2001 | Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| BS 6869:1987 | Code of practice for procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service |
| ASTM G 114 : 2014 : REDLINE | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| EN 961 : 1995 | GAS WELDING EQUIPMENT - MANIFOLD REGULATORS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
| ISO 7291:2010 | Gas welding equipment Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) |
| ASTM G 131 : 1996 | Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques |
| ASTM G 127 : 2015 : REDLINE | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ISO 10524:1995 | Pressure regulators and pressure regulators with flow-metering devices for medical gas systems |
| EN 849:1996/A2:2001 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ASTM G 86 : 1998 : REV A | Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments |
| ASTM G 4 : 2001 | Standard Guide for Conducting Corrosion Tests in Field Applications |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
| ISO/TR 9122-6:1994 | Toxicity testing of fire effluents Part 6: Guidance for regulators and specifiers on the assessment of toxic hazards in fires in buildings and transport |
| ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
| ASTM G 120 : 2015 : REDLINE | Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction |
| ASTM G 126 : 2016 : REDLINE | Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.