CEI EN 50341-2-22 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-22: NATIONAL NORMATIVE ASPECTS (NNA) FOR POLAND (BASED ON EN 50341-1:2012)
Hardcopy , PDF
22-12-2022
English
01-01-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1. Scope
2. Normative references, definitions and symbols
3. Basis of design
4. Action on lines
5. Electrical requirements
6. Earthing systems
7. Supports
8. Foundations
9. Conductors and earth-wires
10. Insulators
11. Hardware
12. Quality assurance, checks and taking-over
Annex G (normative) - Calculation methods for earthing
systems
Annex H (informative) - Installation and measurements
of earthing systems
Annex J (normative) - Angles in lattice steel towers
Annex K (normative) - Steel poles
Annex M (informative) - Geotechnical and structural
design of foundations
Describes the requirements which shall be fulfilled while designing and constructing of new overhead lines with nominal system voltages exceeding 1 kV AC.
| Committee |
CT 11/7
|
| DevelopmentNote |
Classificazione CEI 11-87. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 50341-2-22:2016 | Identical |
| PN EN 10020 : 2003 | DEFINITION AND CLASSIFICATION OF GRADES OF STEEL |
| PN EN ISO 14688-2 : 2006 AMD 1 2014 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION (ISO 14688-2:2004/AMD 1:2013) |
| PN EN 14229 : 2010 | STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
| PN EN 1991-1-4 : 2008 AMD 1 2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| PN EN ISO 1461 : 2011 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| PN EN 1993-1-8 : 2006 NA 2011 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| PN EN 1997-2 : 2009 AC 2010 | EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING |
| PN E-06303 : 1998 | EXPOSURE OF OUTDOOR INSULATION TO POLLUTION AND SELECTION OF INSULATORS UNDER POLLUTED CONDITIONS |
| PN EN 61284 : 2002 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| PN EN 1991-1-6 : 2007 AC 2013 | EUROCODE 1 - ACTIONS ON STRUCTURES PART 1-6: GENERAL ACTIONS - ACTIONS DURING EXECUTION |
| PN EN 1995-1-1 : 2010 AMD 2 2014 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| PN EN 1993-1-5 : 2008 AMD 1 2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-5: PLATED STRUCTURAL ELEMENTS |
| PN EN 10025-2 : 2007 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| PN EN 1090-1 : 2010 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
| PN EN ISO 14713 : 2000 | PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
| PN 80/B-03322 : 1980 | ELECTRIC OVERHEAD LINES - FOUNDATIONS OF SUPPORTING STRUCTURES - STATIC CALCULATIONS AND DESIGN |
| PN 78/B-02483 : 1978 | LARGE DIAMETER BORED PILES - SPECIFICATIONS AND TESTS |
| PN EN 12843 : 2008 | PRECAST CONCRETE PRODUCTS - MASTS AND POLES |
| PN EN 1993-1-11 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-11: DESIGN OF STRUCTURES WITH TENSION COMPONENTS |
| PN EN 1990 : 2004 NA 2010 | EUROCODE - BASIS OF STRUCTURAL DESIGN |
| PN 88/E-08501 : 1988 | ELECTRICAL EQUIPMENT - PLATES AND SAFETY SIGNS |
| PN EN ISO 14688-1 : 2006 AMD 1 2014 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 1: IDENTIFICATION AND DESCRIPTION (ISO 14688-1:2002/AMD 1:2013) |
| PN EN 1993-1-1 : 2006 AMD 1 2014 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| PN EN 1090-2 : 2009 + A1 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PN EN 1992-1-1 : 2008 AMD 1 2015 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| PN EN 1997-1 : 2008 AMD 1 2014 | EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES |
| PN EN 10025-1 : 2007 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PN 83/B-02482 : 1983 | BUILDING FOUNDATIONS - CAPACITY OF PILES AND PILE FOUNDATIONS |
| PN EN 61395 : 2002 | OVERHEAD ELECTRICAL CONDUCTORS - CREEP TEST PROCEDURES FOR STRANDED CONDUCTORS |
| PN EN 1993-1-3 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
| PN EN 1993-3-1 : 2008 NA 2010 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS |
| PN E-05115 : 2002 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| PN EN 60305 : 2007 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - CHARACTERISTICS OF INSULATOR UNITS OF THE CAP AND PIN TYPE |
| PN EN 60652 : 2006 | LOADING TESTS ON OVERHEAD LINE STRUCTURES |
| PN EN 1998-6 : 2005 | EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 6: TOWERS, MASTS AND CHIMNEYS |
| PN EN 1993-1-6 : 2009 AMD 1 2017 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
| PN EN 61109 : 2010 | INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.