CEN/TR 16557:2013
Current
The latest, up-to-date edition.
Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination
18-09-2013
Foreword
1 Scope
2 Normative references
3 Background of the High FAME diesel blends
(B11 - B30) taskforce work
4 Record of the work to date
5 The feasibility study
6 Conclusions
7 Acknowledgement
Bibliography
This Technical Report provides background information to the deliberations within CEN that led to establish a specification for blending from more than 10 % (V/V) up to 30 % (V/V) of fatty acid methyl ester (FAME) in diesel fuel to be used in captive fleet application for designated vehicles. It gives guidance and explanations to the producers, blenders, marketers and users of high FAME diesel blends (B11 to B30).The sole designation "Bxx" refers to a FAME-diesel blend where "xx" is the specific FAME content in volume percentage. The connotation "Byy fuel" is used in this document for a fuel with a defined range of FAME allowed and having "yy" volume percentage of FAME content as the maximum of that range.NOTEFor the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.
Committee |
CEN/TC 19
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
S.R. CEN/TR 16557:2013 | Identical |
PD CEN/TR 16557:2013 | Identical |
14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 5165:1998 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
XP M15 032 : 2010 XP | AUTOMOTIVE FUELS - FATTY ACID METHYL AND ETHYL ESTERS (FAME AND FAEE) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
ISO 6245:2001 | Petroleum products — Determination of ash |
EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
ISO 91-1:1992 | Petroleum measurement tables Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F |
EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.