CFR 49(PTS400-571) : OCT 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRANSPORTATION
Superseded date
05-01-2024
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
| DevelopmentNote |
Together with CFR 49(PTS572-999), Supersedes CFR 49(PTS400-599). (03/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 2595 : 2015 | PERFORMANCE REQUIREMENTS FOR SEALED BEAM MOTOR VEHICLE HEADLAMPS |
| SAE J 1727 : 2015 | CALCULATION GUIDELINES FOR IMPACT TESTING |
| SAE J 2714 : 2015 | GASOLINE DIRECT INJECTION PUMP |
| SAE J 1715 : 2014 | HYBRID ELECTRIC VEHICLE (HEV) AND ELECTRIC VEHICLE (EV) TERMINOLOGY |
| SAE AIR744C | AEROSPACE AUXILIARY POWER SOURCES |
| SAE J 1698/1 : 2017 | EVENT DATA RECORDER - OUTPUT DATA DEFINITION |
| SAE J 1939/84 : 2017 | OBD COMMUNICATIONS COMPLIANCE TEST CASES FOR HEAVY DUTY COMPONENTS AND VEHICLES |
| PD ISO/TR 12353-3:2013 | Road vehicles. Traffic accident analysis Guidelines for the interpretation of recorded crash pulse data to determine impact severity |
| SAE J 2418 : 2015 | OCCUPANT RESTRAINT DYNAMIC SYSTEM EVALUATION - FRONTAL IMPACT HEAVY TRUCKS |
| BS ISO 17253:2014 | Earth-moving machinery and rough-terrain variable-reach trucks. Design requirements for machines intended to be driven on road |
| SAE J 2743 : 2017 | AIR COMPRESSOR SIZE RATING RECOMMENDED PRACTICE - TRUCK AND BUS |
| SAE J850_201504 | FIXED RIGID BARRIER COLLISION TESTS |
| SAE J577_201509 | VIBRATION TEST MACHINE AND OPERATION PROCEDURE |
| SAE AS 6316 : 2017 | PERFORMANCE STANDARDS FOR OBLIQUE FACING PASSENGER SEATS IN TRANSPORT AIRCRAFT |
| SAE J 2261 : 2016 | STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
| SAE AS 8049/1 : 2016 | PERFORMANCE STANDARDS FOR SIDE-FACING SEATS IN CIVIL ROTORCRAFT, TRANSPORT AIRCRAFT, AND GENERAL AVIATION AIRCRAFT |
| CSA D409 : 2016 | MOTOR VEHICLES FOR THE TRANSPORTATION OF PERSONS WITH PHYSICAL DISABILITIES |
| ISO 10865-1:2012 | Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 1: Systems for rearward-facing wheelchair-seated passengers |
| SAE ARP 5526 : 2015 | AIRCRAFT SEAT DESIGN GUIDANCE AND CLARIFICATIONS |
| SAE J 2591 : 2017 | LIMITED ADAPTIVE FORWARD LIGHTING SYSTEM |
| SAE J 3026 : 2016 | AMBULANCE PATIENT COMPARTMENT SEATING INTEGRITY AND OCCUPANT RESTRAINT |
| SAE J 2481 : 2013 | DYNAMIC SIMULATION SLED TESTING |
| SAE J759_201712 | LIGHTING IDENTIFICATION CODE |
| NFPA 556 : 2016 | GUIDE ON METHODS FOR EVALUATING FIRE HAZARD TO OCCUPANTS OF PASSENGER ROAD VEHICLES |
| NFPA 1906 : 2016 | WILDLAND FIRE APPARATUS |
| NFPA 1901:2016 | AUTOMOTIVE FIRE APPARATUS |
| NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
| NFPA 556 : 2020 | GUIDE ON METHODS FOR EVALUATING FIRE HAZARD TO OCCUPANTS OF PASSENGER ROAD VEHICLES |
| MIL-PRF-32440 Base Document:2013 | COATINGS, CHIP-, IMPACT-, WEAR-, AND ABRASION-RESISTANT |
| UFC 4-141-04 : Change 1 | UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN |
| SAE J 2932 : 2017 | AIR DISC BRAKE ACTUATOR TEST REQUIREMENTS |
| SAE J1133_201507 | SCHOOL BUS STOP ARM LAMP |
| CNG FUEL INSPECTOR RESOURCE PACKAGE : 2013 | CONSISTS OF ANSI NGV 1-2006/CSA NGV 1-2006, COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES; ANSI PRD 1-2013, PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS; ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS; ANSI NGV 2A-2012, ADDENDA 1 TO ANSI NGV 2-2007, COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS AND ANSI NGV 2B-2012 |
| 13/30264425 DC : 0 | BS ISO 10865-2 - WHEELCHAIR CONTAINMENT AND OCCUPANT RETENTION SYSTEMS FOR ACCESSIBLE TRANSPORT VEHICLES DESIGNED FOR USE BY BOTH SITTING AND STANDING PASSENGERS - PART 2: SYSTEMS FOR FORWARD-FACING WHEELCHAIR-SEATED PASSENGERS |
| SAE J 2838 : 2013 | FULL ADAPTIVE FORWARD LIGHTING SYSTEMS |
| SAE J576_201708 | PLASTIC MATERIAL OR MATERIALS FOR USE IN OPTICAL PARTS SUCH AS LENSES AND REFLEX REFLECTORS OF MOTOR VEHICLE LIGHTING DEVICES |
| SAE J 2014 : 2013 | PNEUMATIC TIRE/WHEEL/RUNFLAT ASSEMBLY QUALIFICATIONS FOR MILITARY TACTICAL WHEELED VEHICLES |
| SAE J 2956 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - SIDE IMPACT AMBULANCE PATIENT COMPARTMENT |
| SAE J 2691 : 2013 | 15 POLE CONNECTOR BETWEEN TOWING VEHICLES AND TRAILERS WITH 12 VOLT NOMINAL SUPPLY |
| SAE J972_201503 | MOVING RIGID BARRIER COLLISION TESTS |
| CSA/ANSI PRD 1 : 2013(R2018) | PRESSURE RELIEF DEVICES FOR NATURAL GAS VEHICLE (NGV) FUEL CONTAINERS |
| SAE J 703 : 2015 | FUEL SYSTEMS - TRUCK AND TRUCK TRACTORS |
| SAE J 3069 : 2016 | ADAPTIVE DRIVING BEAM |
| CSA D250 : 2016 | SCHOOL BUSES |
| SAE J 1698/3 : 2015 | EVENT DATA RECORDER - COMPLIANCE ASSESSMENT |
| SAE J 3081 : 2015 | HEAVY VEHICLE CONTROLS PRIORITIZATION AND CONFLICT RESOLUTION |
| SAE J 2042 : 2014 | CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR ON-ROAD VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2686 : 2017 | BRAKE DRUM QUALIFICATION RECOMMENDED PRACTICE |
| ISO/TR 12353-3:2013 | Road vehicles — Traffic accident analysis — Part 3: Guidelines for the interpretation of recorded crash pulse data to determine impact severity |
| SAE J 2424 : 2013 | FREE MOTION HEADFORM IMPACT TESTS OF HEAVY TRUCK CAB INTERIORS |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| SAE J 2650 : 2013 | PERFORMANCE REQUIREMENTS FOR LIGHT EMITTING DIODE (LED) ROAD ILLUMINATION DEVICES |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| 12/30251305 DC : 0 | BS ISO 15830-1 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 1: TERMINOLOGY AND RATIONALE |
| SAE AIR 1375 : 2014 | MINIMUM SAFETY REQUIREMENTS FOR SPECIAL PURPOSE AIRLINE GROUND SUPPORT EQUIPMENT |
| SAE J 1698 : 2017 | EVENT DATA RECORDER |
| BS ISO 15830-1:2013 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Terminology and rationale |
| SAE J 2971 : 2013 | TRUCK AND BUS AERODYNAMIC DEVICE AND CONCEPT TERMINOLOGY |
| SAE J 2917 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - FRONTAL IMPACT AMBULANCE PATIENT COMPARTMENT |
| SAE ARP 5818 : 2015 | AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
| SAE J 3095 : 2016 | LINEAR IMPACTOR CALIBRATION PROCEDURE |
| SAE J 2937 : 2016 | LINEAR IMPACT PROCEDURE FOR OCCUPANT EJECTION PROTECTION |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| SAE J 1432 : 2016 | REAR HIGH MOUNTED STOP LAMPS AND REAR HIGH MOUNTED TURN SIGNAL LAMPS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 2419 : 2017 | OCCUPANT RESTRAINT SYSTEM EVALUATION - FRONTAL IMPACT SYSTEM - LEVEL HEAVY TRUCKS |
| SAE J 1383 : 2010 | PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE HEADLAMPS |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| SAE J 3044 : 2016 | OCCUPANT RESTRAINT AND EQUIPMENT MOUNTING INTEGRITY - REAR IMPACT AMBULANCE PATIENT COMPARTMENT |
| SAE J 2040 : 2016 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE J 1698/2 : 2018 | EVENT DATA RECORDER - RETRIEVAL TOOL PROTOCOL |
| ISO 10542-1:2012 | Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems |
| NFPA 1912 : 2016 | FIRE APPARATUS REFURBISHING |
| SAE J 369 : 2013 | FLAMMABILITY OF POLYMERIC INTERIOR MATERIALS - HORIZONTAL TEST METHOD |
| SAE J 1832 : 2016 | LOW PRESSURE GASOLINE FUEL INJECTOR |
| SAE J 3059 : 2017 | AMBULANCE PATIENT COMPARTMENT SEATED OCCUPANT EXCURSION ZONE EVALUATION |
| SAE J 2087 : 2017 | DAYTIME RUNNING LIGHT |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| SAE J 2999 : 2017 | Determination of the Effective Projected Luminous Lens Area (EPLLA) by Design Analysis<br> |
| MIL-PRF-32349 Revision A:2011 | CONTAINER, CARGO TRIPLE CONTAINER (TRICON) (WITHOUT CABINETS, DRAWERS, OR SHELVES) |
| SAE J592_200903 | SIDEMARKER LAMPS FOR USE ON ROAD VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2247 : 2013 | TRUCK TRACTOR POWER OUTPUT FOR TRAILER ABS |
| FAA AC 150/5300-13 : 2008 | AIRPORT DESIGN |
| MIL-DTL-45150 Revision N:2015 | Chassis, Trailer, 2-Wheel Cart Type 2-1/2 Ton |
| SAE J852_201707 | FRONT CORNERING LAMPS FOR USE ON MOTOR VEHICLES |
| SAE ARP1247E | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| NFPA 1917 : 2016 | AUTOMOTIVE AMBULANCES |
| SAE J 2406 : 2018 | RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS |
| SAE J887_201507 | SCHOOL BUS WARNING LAMP |
| SAE J 2442 : 2015 | HARMONIZED PROVISIONS FOR INSTALLATION OF EXTERIOR LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES |
| SAE J560_201604 | PRIMARY AND AUXILIARY SEVEN CONDUCTOR ELECTRICAL CONNECTOR FOR TRUCK-TRAILER JUMPER CABLE |
| ISO 15830-1:2013 | Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale |
| ISO 17253:2014 | Earth-moving machinery and rough-terrain variable-reach trucks Design requirements for machines intended to be driven on road |
| CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
| MIL-PRF-32566 Base Document:2016 | ENERGY-ATTENUATING FLOOR MATS FOR USE IN U.S. MILITARY GROUND VEHICLES |
| SAE J 1765 : 2012 | SAE MINIATURE BULB VIBRATION TEST |
| 12/30247154 DC : 0 | BS ISO 17253 - EARTH-MOVING MACHINES AND ROUGH-TERRAIN VARIABLE REACH TRUCKS - DESIGN REQUIREMENTS FOR MACHINES INTENDED TO BE DRIVEN ON THE ROAD |
| SAE J222_201303 | FRONT POSITION LAMP |
| BS ISO 10865-1:2012 | Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Systems for rearward-facing wheelchair-seated passengers |
| MIL-PRF-32548 Base Document:2016 | OCCUPANT SEAT BELT RESTRAINTS FOR USE IN U.S. MILITARY GROUND VEHICLES |
| MIL-DTL-62073 Revision H:2011 | Trailer, Flatbed: 4-, 5-, and 7.5-Ton, 4-Wheel (Tandem) Cart Type; Trailer, Bolster: 4-Ton, 4-Wheel (Tandem) (No S/S Document) |
| ASTM E 2574/E2574M : 2017 : REDLINE | Standard Test Method for Fire Testing of School Bus Seat Assemblies |
| SAE J 3040 : 2015 | ELECTRIC VEHICLE (E-VEHICLE) CRASH TEST LAB SAFETY GUIDELINES |
| SAE J585_201406 | TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| A-A-59606 Revision A:2013 | Arm, Windshield Wiper: Blade, Windshield Wiper: and Blade Refill, Windshield Wiper |
| SAE J 3077 : 2015 | DEFINITIONS AND DATA SOURCES FOR THE DRIVER VEHICLE INTERFACE (DVI) |
| SAE J 2426 : 2015 | OCCUPANT RESTRAINT SYSTEM EVALUATION - LATERAL ROLLOVER SYSTEM-LEVEL HEAVY TRUCKS |
| SAE J586_201605 | STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH |
| SAE J 2041 : 2013 | REFLEX REFLECTORS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH |
| SAE ARP 4466 : 2011 | DIMENSIONAL COMPATIBILITY OF CHILD RESTRAINT SYSTEMS AND PASSENGER SEAT SYSTEMS IN CIVIL TRANSPORT AIRPLANES |
| SAE J 1911 : 2014 | TEST PROCEDURE FOR AIR RESERVOIR CAPACITY - TRUCK AND BUS |
| SAE J 578 : 2016 | COLOR SPECIFICATION |
| SAE ARP 6316 : 2016 | PERFORMANCE STANDARDS FOR OBLIQUE FACING PASSENGER SEATS IN TRANSPORT AIRCRAFT |
| CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
| ASTM E 2706 : 2018 | Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements |
| CSA Z240 VC SERIES : 2014 | |
| ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
| CSA/ANSI NGV2 : 2016 | COMPRESSED NATURAL GAS VEHICLE FUEL CONTAINERS |
| SAE J2714:2023 | Gasoline Direct Injection Pump |
| SAE J1832:2023-02 | Low-Pressure Gasoline Fuel Injector |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.