DD ENV 10169-2:1999
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Continuously organic coated (coil coated) steel flat products Products for building exterior applications
Hardcopy , PDF
29-10-2018
English
15-10-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
Foreword
1. Scope
2. Normative references
3. Definitions
3.1 Building exterior applications
3.2 Factory production control
3.3 Initial type testing
3.4 Performance test
3.5 Corrosivity
3.6 Corrosion stresses
3.7 Corrosion system
3.8 Climate
3.9 Atmosphere
3.10 Type of atmosphere
3.11 Local environment
3.12 Micro environment
3.13 Corrosivity category
3.14 Product flexibility category
3.15 Corrosion protection category
3.16 UV category
3.17 UV resistance category
3.18 Accessibility
3.19 Period of protection
3.20 Time of wetness
4. Designation
5. Substrates, organic coatings, manufacturing process
6. Requirements
6.1 Properties which form part of factory production control
6.2 Performance properties
6.3 Freedom of defects
7. Testing
7.1 General
7.2 Test units
7.3 Type and number of tests
7.4 Sampling
7.5 Retests
7.6 Inspection documents
8. Marking
9. Packing and despatch
10. Storage
11. Disputes
12. Information to be supplied by the purchaser
Annex A (informative) Types of atmosphere
Annex B (informative) Relationship between corrosivity categories
and types of atmosphere. Examples of typical environments in a
temperate climate
Annex C (informative) Examples of exposures for the different UV
categories
Annex D (informative) ECCA outdoor exposure sites
Annex F (informative) Classification of coatings into corrosion
protection and UV resistance categories from outdoor exposure
test results
Gives specific requirements for continuously organic coated (coil coated) steel flat products that are used for building exterior applications. Specifies particularly, the performance requirements of different product flexibility categories, different corrosion protection categories and different UV resistance categories. Covered in this standard are: wide strip, sheet cut from wide strip, slit side strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
| Committee |
ISE/109
|
| DevelopmentNote |
Supersedes 95/714185 DC. (08/2005)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ENV 10169-2 : 1999 | Identical |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| EN 10079:2007 | Definition of steel products |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| ENV 606 : DRAFT 1993 | BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.