• Shopping Cart
    There are no items in your cart

EN 10079:2007

Current

Current

The latest, up-to-date edition.

Definition of steel products

Published date

14-03-2007

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
Annex A (normative) - Steel products and associated
        standards
Annex B (informative) - Notes on the former European Coal
        and Steel Community (ECSC) definitions and
        Harmonised Commodity Description and Coding
        System (HS) definitions
        B.1 European Coal and Steel Community (ECSC)
            definitions
        B.2 Harmonized Commodity Description and Coding
            System definitions
Annex C (informative) - Trilingual vocabulary
Bibliography

This European Standard defines terms for steel products according to:a) shape and dimensions; andb) appearance and surface condition.NOTE 1Although the products are generally defined independently of their end uses or manufacturing processes, it has sometimes been necessary to make reference to these criteria.NOTE 2All dimensions given in this European Standard are nominal.

Committee
CEN/TC 459/SC 12
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

11/30239491 DC : 0 BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
UNE-EN 10088-5:2010 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
UNE-EN 10343:2010 Steels for quenching and tempering for construction purposes - Technical delivery conditions
UNE-EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape
I.S. EN 10208-2:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
DIN EN 10152:2009-07 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10338:2015-10 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
I.S. EN 10169-2:2006 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
I.S. EN 10016-1:1995 NON-ALLOY STEEL ROD FOR DRAWING AND/OR COLD ROLLING - PART 1: GENERAL REQUIREMENTS
01/715519 DC : DRAFT NOV 2001 PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
07/30117697 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
17/30346738 DC : 0 BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
13/30290101 DC : 0 BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 10292:2007 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PREN 10207 : DRAFT 2015 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
DIN EN 10027-1:2016-02 (Draft) DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES
UNI EN 4700-006 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
05/30129551 DC : 0 PREN 4700-5 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 5: FORGING STOCK
11/30239473 DC : 0 BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10149-1:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
08/30190326 DC : DRAFT DEC 2008 BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
EN 10085:2001 Nitriding steels - Technical delivery conditions
15/30318676 DC : 0 BS EN 10056-1 - STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
BS EN 15566:2016 Railway applications. Railway rolling stock. Draw gear and screw coupling
11/30254168 DC : 0 BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock
13/30280398 DC : 0 BS EN 10338 - HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
BS EN 14490:2010 Execution of special geotechnical works. Soil nailing
PREN 10225-4 : DRAFT 2017 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
09/30156692 DC : 0 BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
06/30148769 DC : 0 EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS
PREN 10051 : DRAFT 2009 HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 10208-3 : DRAFT 1997 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
PREN 4700-004 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE
PREN 4700-005 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
PREN 4700-006 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
I.S. EN 10169:2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
PREN 10120 : DRAFT 2014 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
PREN 10027-2 : DRAFT 2013 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
I.S. EN 10363:2016 CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 10028-1 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 4700-007:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN 4700-007 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General
I.S. EN 10088-5:2009 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
BS EN 10058:2003 Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 13480-2:2017 Metallic industrial piping Materials
DIN EN 10163-1:2005-03 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements
DIN EN 10208-1:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
BS EN 10154:2002 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions
BS EN 10095 : 1999-07 HEAT RESISTING STEELS AND NICKEL ALLOYS
BS EN 10250-1:1999 Open steel die forgings for general engineering purposes General requirements
UNE-EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
BS EN 10113-1:1993 Hot-rolled products in weldable fine grain structural steels General delivery conditions
BS EN 10059:2003 Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions
UNE-EN 10272:2016 Stainless steel bars for pressure purposes
BS EN 10089:2002 Hot rolled steels for quenched and tempered springs. Technical delivery conditions
BS EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions
UNE-EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
BS EN 10214:1995 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions
BS EN 10034:1993 Structural steel I and H sections. Tolerances on shape and dimensions
BS EN 10205:2016 Cold reduced tinmill products. Blackplate
BS EN 10272:2007 Stainless steel bars for pressure purposes
BS EN 10027-2:2015 Designation systems for steels Numerical system
BS EN 10249-1:1996 Cold formed sheet piling of non alloy steels Technical delivery conditions
BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
DIN EN 10083-2:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 10084:2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10120:2017 STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
I.S. EN 10222-1:2017 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10108:2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
EN 10277-1:2008 Bright steel products - Technical delivery conditions - Part 1: General
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 10248-1:1995 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10335:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
EN 10088-2:2014 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10143:2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 10120:2017 Steel sheet and strip for welded gas cylinders
EN 10088-4:2009 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10067:1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10249-1:1995 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10259 : 1997 COLD-ROLLED STAINLESS STEEL WIDE STRIP AND PLATE/SHEET - TOLERANCES ON DIMENSIONS AND SHAPE
EN 10333:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate)
EN 10092-2:2003 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions
EN 10272:2016 Stainless steel bars for pressure purposes
DIN EN 10292:2007-06 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10169-2:2006 Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
EN 10021:2006 General technical delivery conditions for steel products
EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10253-1:1999 Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements
EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 10253-3:2008 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip - Tolerances on dimensions and shape
CR 12459 : 1996 NON-DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
EN 10027-2:2015 Designation systems for steels - Part 2: Numerical system
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
DIN EN 10258:1997-07 COLD-ROLLED STAINLESS STEEL NARROW STRIP AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 10205:2017-03 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
EN 10205:2016 Cold reduced tinmill products - Blackplate
EN 10292:2007 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions
EN 10031:2003 Semi-finished products for forging - Tolerances on dimensions shape and mass
EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10140:2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10090:1998 Valve steels and alloys for internal combustion engines
EN 10016-1:1994 Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
EN 10169:2010+A1:2012 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
EN 10214 : 1995 CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
I.S. EN 10248-1:1996 HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
04/30125076 DC : 0 EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
04/30127156 DC : DRAFT DEC 2004 EN ISO 17660-2 - WELDING - WELDING OF REINFORCING STEEL - PART 2: NON-LOAD BEARING WELDED JOINTS
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings
13/30280395 DC : 0 BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10088-4:2010-01 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
I.S. EN 15566:2016 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
12/30270633 DC : 0 BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
16/30314754 DC : DRAFT JAN 2016 BS EN 10027-1 - DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES
08/30182454 DC : DRAFT JULY 2008 BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
11/30239494 DC : 0 BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
12/30240393 DC : 0 BS ISO 6929 - STEEL PRODUCTS - VOCABULARY
11/30253751 DC : 0 BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
03/113179 DC : DRAFT AUG 2003 EN 10140 - COLD ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
DD ENV 606:1993 Bar coded transport and handling labels for steel products
98/712789 DC : DRAFT AUG 98 PREN 10302 - CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
15/30331537 DC : 0 BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
04/30127152 DC : DRAFT DEC 2004 EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS
PREN 10139 : DRAFT 2013 COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
NF EN 4700-005 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
BS EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
05/30132585 DC : DRAFT APR 2005 EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
09/30200092 DC : 0 BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
PREN 10029 : DRAFT 2009 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
DIN EN 10343:2009-07 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
PREN 10149-2 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
PREN 10272 : DRAFT 2013 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 10207:2017 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
UNE-EN 10365:2018 Hot rolled steel channels, I and H sections - Dimensions and masses
UNE-EN 10088-4:2010 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
UNI EN 4700-007 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
I.S. EN 4700-006:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
NF EN 4700-002 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
DIN EN ISO 17660-1:2006-12 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006); German version EN ISO 17660-1:2006
DIN EN 10302:2008-06 Creep resisting steels, nickel and cobalt alloys
UNE-EN 10120:2018 Steel sheet and strip for welded gas cylinders
DIN EN 14475:2006-04 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 10269:2014-02 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 505:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
DIN EN 10140:2006-09 Cold rolled narrow steel strip - Tolerances on dimensions and shape
DIN EN 10130 : 2007-04 COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10335:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Non alloyed electrolytic chromium/chromium oxide coated steel
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 10155:1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 10279:2000 Hot rolled steel channels. Tolerances on shape, dimension and mass
BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions
BS EN 10061:2003 Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10215:1995 Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions
UNE-EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
I.S. EN 10143:2006 CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10051:2010 CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10273:2016 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10130:2006 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10131:2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICKEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10208-2:2009-07 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
I.S. EN 10152:2017 ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10029:2010 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10209:2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10027-2:2015-07 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10088-1:2014-12 Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014
I.S. EN 505:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
I.S. EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
I.S. EN 10021:2006 GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL PRODUCTS
I.S. EN 10205:2016 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
DIN EN 10208-1:1998-02 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 10169-3:2003-09 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10169-2:2006-07 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
I.S. EN 10027-1:2016 DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES
I.S. EN 10088-1:2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10163-1:2005 DELIVERY REQUIREMENTS FOR SURFACE CONDITION OF HOT-ROLLED STEEL PLATES, WIDE FLATS AND SECTIONS - PART 1: GENERAL REQUIREMENTS
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 10269:2013 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
I.S. EN 10272:2016&LC:2016 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 502:2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
I.S. EN 10088-3:2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10140:2006 COLD ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10268:2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10088-3:2014-12 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
I.S. EN 10218-2:2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 2: WIRE DIMENSIONS AND TOLERANCES
I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10277-1:2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10277-1:2008-06 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN 10025-1:2005-02 Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004
I.S. EN 10111:2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10302:2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10029 : 2011 Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape
UNI EN 502 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
UNI EN 10111 : 2008 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
07/30164802 DC : 0 BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
11/30251494 DC : 0 BS EN 10268:2006+A1 - COLD ROLLED STEEL FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10169:2012-06 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012)
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire
I.S. EN 10326:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 10253-3:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
12/30264367 DC : 0 BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
02/713545 DC : DRAFT NOV 2002 EN 10131 - COLD ROLLED UNCOATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
BS EN 10363:2016 Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip. Tolerances on dimensions and shape
13/30286664 DC : 0 BS EN 10139 - COLD ROLLED UNCOATED MILD STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 606:2004 BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
I.S. EN 10025-1:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10152:2015-10 (Draft) ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10205:1992-01 COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
12/30264373 DC : 0 BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
UNE-EN 10338:2016 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
BS EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
UNI EN 4700-005 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
UNI EN 10088-5 : 2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
14/30300972 DC : 0 BS EN 10363 - CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 10083-1:2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10253-4:2008-06 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
UNI EN 4700-004 : 2011 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
PREN 10209 : DRAFT 2010 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
14/30312176 DC : 0 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
06/30146724 DC : 0 EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
13/30288572 DC : 0 BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
UNE-EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
99/712245 DC : DRAFT AUG 1999 PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS
DIN EN 10051:2011-02 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
99/701054 DC : DRAFT JAN 1999 PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
13/30288575 DC : 0 BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10365:2017 HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES
15/30318326 DC : 0 BS EN 16828 - HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES
13/30286145 DC : 0 BS EN 10027-2 - DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
01/715451 DC : DRAFT NOV 2001 PREN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
08/30167676 DC : DRAFT JAN 2008 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
05/30132920 DC : DRAFT APR 2005 EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES
NF EN 4700-006 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
PREN 10222-1 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
04/30117571 DC : DRAFT AUG 2004 EN 10143 - CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
07/30172380 DC : 0 BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
PD 6622:1998 Designation systems for steel. Additional symbols
05/30126202 DC : 0 EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10085:2001 NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10058:2003 HOT ROLLED FLAT STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS
UNI EN 10253-4 : 2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
I.S. EN 10056-1:2017 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
UNI EN 4700-003 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
NF EN 4700-003 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
BS EN 10056-1:2017 Structural steel equal and unequal leg angles Dimensions
UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
UNE-EN 10056-1:2017 Structural steel equal and unequal leg angles - Part 1: Dimensions
17/30362175 DC : 0 BS EN 10058 - HOT ROLLED FLAT STEEL BARS AND STEEL WIDE FLATS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS
PREN 505 : DRAFT 2012 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNE-EN 10205:2017 Cold reduced tinmill products - Blackplate
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
EN 1090-2:2008+A1:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
ISO 6929:2013 Steel products — Vocabulary
I.S. ENV 10169-2:1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 10225:2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10083-1:2006-10 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10132-1:2000 COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN ISO 17660-2:2006-12 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006); German version EN ISO 17660-2:2006
DIN EN 10092-2:2004-01 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves, Dimensions and tolerances on shape and dimensions; German version EN 10092-2:2003
UNE-EN 10208-1:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 10089:2003-04 Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
BS EN 10333:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption. Tin coated steel (tinplate)
BS EN 14475:2006 Execution of special geotechnical works. Reinforced fill
BS EN 10208-2:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
BS EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
BS EN 10163-1:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections General requirements
BS EN 10120:2017 Steel sheet and strip for welded gas cylinders
BS EN 10024:1995 Hot rolled taper flange I sections. Tolerances on shape and dimensions
BS EN 10140:2006 Cold rolled narrow steel strip. Tolerances on dimensions and shape
UNE-EN 10027-1:2017 Designation systems for steels - Part 1: Steel names
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
UNE-EN 10088-3:2015 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 10225:2010 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 10058:2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10334:2005 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
EN 502:2013 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
EN ISO 17660-1:2006 Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006)
UNI EN 10088-3 : 2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10208-2 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 10269 : 2013 Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNI EN 10268 : 2013 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10250-1 : 2001 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS
UNI EN 505 : 2013 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNI EN 10218-2 : 2012 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 2: WIRE DIMENSIONS AND TOLERANCES
UNI EN 10083-1 : 2006 STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 10080 : 2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
UNI EN 10131 : 2006 COLD ROLLED UNCOATED AND ZINC OR ZINC-NICHEL ELECTROLYTICALLY COATED LOW CARBON AND HIGH YIELD STRENGTH STEEL FLAT PRODUCTS FOR COLD FORMING - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 10208-1 : 2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN 10051 : 2011 CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
UNI EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10084 : 2008 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
EN 606:2004 Bar coding - Transport and handling labels for steel products
UNI EN 10302 : 2008 CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10021 : 2007 GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL PRODUCTS
UNI EN 10088-1 : 2014 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
UNI EN 10209 : 2013 COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10149-1 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10250-1:2000 OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS
UNI EN 14475 : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 10139:2016-06 COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10131:2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
DIN EN 10143:2006-09 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape; German version EN 10143:2006
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10087:1999 FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS
DIN EN 14490:2010-11 Execution of special geotechnical works - Soil nailing
I.S. EN 10327:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10154:2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
PREN 10205 : DRAFT 2014 COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
I.S. EN 10336:2007 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
98/705399 DC : DRAFT MAR 1998 PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS
02/704945 DC : DRAFT APR 2002 PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
03/108196 DC : 0 EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
08/30180862 DC : DRAFT JUNE 2008 BS EN 10218-2 - STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 2: WIRE DIMENSIONS AND TOLERANCES
I.S. EN 10080:2005 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
09/30188143 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
NF ENV 1090-1 : 96 FD EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS
01/709220 DC : DRAFT JUN 2001 PREN 10027-1 - DESIGNATION SYSTEMS FOR STEEL - PART 1: STEEL NAMES
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
UNI EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
UNI EN 10343 : 2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10056-1:2017-06 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
14/30301272 DC : 0 BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
14/30294825 DC : 0 BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 10253-3:2009-02 Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements; German version EN 10253-3:2008
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN EN 10088-5:2009-07 STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
02/713544 DC : DRAFT NOV 2002 EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
NF EN 4700-001 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF EN 4700-004 : 2012 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
BS DD214(1993) : 1993 DESIGNATION SYSTEM FOR STEEL: ADDITIONAL SYMBOLS FOR STEEL NAMES (ECISS INFORMATION CIRCULAR 10)
PREN 4700-003 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
BS EN 10253-4:2008 Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
NF EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
05/30129555 DC : 0 PREN 4700-6 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS EN 10088-4:2009 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DD ENV 10169-2:1999 Continuously organic coated (coil coated) steel flat products Products for building exterior applications
DIN EN 10365:2017-05 Hot rolled steel channels, I and H sections - Dimensions and masses; English version EN 10365: 2017
I.S. EN 10338:2015 HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 4700-001:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
UNI EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
PREN 10269 : DRAFT 2011 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
I.S. EN 10346:2015 CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PREN 10273 : DRAFT 2013 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10207:2017 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
PREN 10027-1 : DRAFT 2016 DESIGNATION SYSTEMS FOR STEELS - PART 1: STEEL NAMES
PREN 502 : DRAFT 2012 ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
NF EN 10253-3 : 2009 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
UNI EN 4700-001 : 2011 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 10268 : DRAFT 2002 COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 14490:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
I.S. EN 4700-005:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
NF EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10263-1:2017 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
UNE-EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
DIN EN 10092-1:2004-01 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003
DIN EN 10056-2:1994-03 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS
DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
DIN EN 10268:2013-12 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10208-2:2011 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 10151:2003-02 STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10084:2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10225:2009-10 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
DIN EN 10272:2016-10 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
DIN EN 10085:2001-07 Nitriding steels - Technical delivery conditions; English version of DIN EN 10085
DIN EN 502:2013-06 ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
BS EN 10334:2005 Steel for packaging. Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption. Non-coated steel (blackplate)
BS EN 10169-2:2006 Continuously organic coated (coil coated) steel flat products Products for building exterior applications
I.S. EN 10139:2016 COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions
BS EN 10025-1:2004 Hot rolled products of structural steels General technical delivery conditions
BS EN 10253-1:1999 Butt-welding pipe fittings Wrought carbon steel for general use and without specific inspection requirements
BS EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions
BS EN 10092-2:2003 Hot rolled spring steel flat bars Ribbed and grooved spring leaves. Dimensions and tolerances on shape and dimensions
BS EN 10084 : 2008-06 CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
BS EN 502:2013 Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 10087 : 1999-01 FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS
BS EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions
BS EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape
BS EN 10067:1997 Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass
BS EN 12063:1999 Execution of special geotechnical work. Sheet pile walls
BS EN 10143:2006 Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
ISO 17660-1:2006 Welding — Welding of reinforcing steel — Part 1: Load-bearing welded joints
BS EN 10021:2006 General technical delivery conditions for steel products
UNE-EN 10051:2012 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
BS EN 10083-1:2006 Steels for quenching and tempering General technical delivery conditions
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 14475:2011 Execution of special geotechnical works - Reinforced fill
UNE-EN 10269:2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
UNE-EN 10067:1997 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
UNE-EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
BS EN 10137-1:1996 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions General delivery conditions
BS EN 10108:2004 Round steel rod for cold heading and cold extrusion. Dimensions and tolerances
BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
BS EN 10147:2000 Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions
BS EN 10027-1:2016 Designation systems for steels Steel names
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
BS EN 10090:1998 Valve steels and alloys for internal combustion engines
BS EN 606:2004 Bar coding. Transport and handling labels for steel products
BS EN 10142:2000 Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions
BS EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions
BS EN ISO 17660-2:2006 Welding. Welding of reinforcing steel Non load-bearing welded joints
BS EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
UNE-EN 10149-1:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 10139:2016 Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
UNE-EN 10027-2:2016 Designation systems for steels - Part 2: Numerical system
UNE-EN 10268:2007 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
UNE-EN 502:2013 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
UNE-EN 10169:2011 Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
BS EN 10085 : 2001-05 NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
BS EN 10031:2003 Semi finished products for forging. Tolerances on dimensions shape and mass
BS EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
DIN EN 10292:2003-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
ENV 10169-2 : 1999 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 4700-005:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 4700-003:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube
UNI EN 10277-1 : 2008 BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
EN 505:2013 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
EN 4700-007:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock
EN 15566:2016 Railway applications - Railway rolling stock - Draw gear and screw coupling
EN 4700-004:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire
EN 4700-001:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip
EN ISO 17660-2:2006 Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006)
EN 4700-006:2010 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip
PD 6606:1997 Non-destructive testing. Qualification and certification of NDT personnel
I.S. EN 10208-1:2009 STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
PREN 10263-1 : DRAFT 2014 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
05/30129558 DC : 0 PREN 4700-7 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 7: REMELTING STOCK
UNE-EN 15566:2017 Railway applications - Railway rolling stock - Draw gear and screw coupling
I.S. EN 10169-3:2003 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
00/702246 DC : DRAFT JAN 2000 PREN 10058 - HOT ROLLED FLAT STEEL BARS FOR GENERAL PURPOSES
DIN EN 10346:2015-10 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
14/30312182 DC : 0 BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 4700-003:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
99/653204 DC : DRAFT JUN 1999 PREN 606:1999 - BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
PREN 10088-3 : DRAFT 2011 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 10363:2016-10 CONTINUOUSLY HOT-ROLLED PATTERNED STEEL STRIP AND PLATE/SHEET CUT FROM WIDE STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
PREN 10056-1 : DRAFT 2015 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
02/704946 DC : DRAFT APR 2002 PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10088-5:2009 Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
03/306595 DC : 0 BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
08/30188146 DC : 0 BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
02/713626 DC : DRAFT NOV 2002 PREN 10021 - GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL PRODUCTS
BS EN 4700-007:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock
01/715452 DC : DRAFT NOV 2001 PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
11/30254165 DC : 0 BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
10/30227692 DC : 0 BS EN 10209 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS
04/30117694 DC : DRAFT AUG 2004 EN 10130 - COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10209:2013-09 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
08/30182457 DC : DRAFT JULY 2008 BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
07/30164617 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
15/30327671 DC : 0 BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses
97/703009 DC : 0 PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
05/30135488 DC : DRAFT JUN 2005 EN 10292 ED 2 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STEELS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
BS EN 10169 : 2010 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
02/713103 DC : DRAFT NOV 2002 PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
UNE-EN 14490:2013 Execution of special geotechnical works - Soil nailing
PREN 10025-1 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
PREN 4700-007 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
PREN 4700-001 : 200P2 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
PREN 10058 : DRAFT 2017 HOT ROLLED FLAT STEEL BARS AND STEEL WIDE FLATS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS
I.S. EN 10343:2009 STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions
I.S. EN 4700-004:2010 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
I.S. EN 10253-4:2008 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
17/30353548 DC : 0 BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
UNI EN 10169 : 2012 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
17/30346732 DC : 0 BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
UNI EN 10088-4 : 2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
PREN 10338 : DRAFT 2013 HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PREN 10088-1 : DRAFT 2011 STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
PREN 10149-1 : DRAFT 2011 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS
I.S. EN 10088-4:2009 STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10253-3:2008 BUTT-WELDING PIPE FITTINGS - PART 3: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITHOUT SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10025-1:2011-04 (Draft) Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011
BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN ISO 17660-1:2006 Welding. Welding of reinforcing steel Load-bearing welded joints
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
UNE-EN 10088-1:2015 Stainless steels - Part 1: List of stainless steels
BS EN 10208-1:2009 Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
BS EN 10017:2004 Steel rod for drawing and/or cold rolling. Dimensions and tolerances
BS EN 10259:1997 Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape
BS EN 10055:1996 Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions
BS EN 10268 : 2006 COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 505:2013 Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
UNE-EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 10225:2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10130:2006 Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions
BS EN 10060:2003 Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions
BS EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General
BS EN 10092-1:2003 Hot rolled spring steel flat bars Flat bars. Dimensions and tolerances on shape and dimensions
BS EN 10088-1:2014 Stainless steels List of stainless steels
BS EN 10258:1997 Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape
BS EN 10222-1:2017 Steel forgings for pressure purposes General requirements for open die forgings
BS EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
BS EN 10028-1:2017 Flat products made of steels for pressure purposes General requirements
BS EN 10151:2002 Stainless steel strip for springs. Technical delivery conditions
BS EN 10277-1:2008 Bright steel products. Technical delivery conditions General
BS EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 10152:2017 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
BS EN 10278:1999 Dimensions and tolerances of bright steel products
BS EN 10292:2007 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10221:1995 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10087:1998 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
EN 10084:2008 Case hardening steels - Technical delivery conditions
DIN EN 10336:2007-07 CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10333:2005-07 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate); German version EN 10333:2005
EN 10336:2007 Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming - Technical delivery conditions
DIN EN 10326:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
DIN EN 10056-1:1998-10 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
DIN EN 10327:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10137-1 : 1995 PLATES AND WIDE FLATS MADE OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED OR PRECIPITATION HARDENED CONDITIONS - GENERAL DELIVERY CONDITIONS
EN 10215 : 1995 CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
DIN EN 10334:2005-07 STEEL FOR PACKAGING - FLAT STEEL PRODUCTS INTENDED FOR USE IN CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - NON-COATED STEEL (BLACKPLATE)
DIN EN 10021:2007-03 General technical delivery conditions for steel products
DIN EN 10059:2004-02 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10059:2003
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10365:2017 Hot rolled steel channels, I and H sections - Dimensions and masses
EN 10092-1:2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 10343:2009 Steels for quenching and tempering for construction purposes - Technical delivery conditions
EN 10088-5:2009 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10338:2015 Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions
EN 12063:1999 Execution of special geotechnical work - Sheet-pile walls
EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 10095:1999 Heat resisting steels and nickel alloys
EN 10250-1:1999 Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10151:2002 Stainless steel strip for springs - Technical delivery conditions
EN 10267:1998 Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures
EN 10089:2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
EN 10154 : 2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN 10302:2008 Creep resisting steels, nickel and cobalt alloys
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
DIN EN 10055:1995-12 HOT ROLLED STEEL EQUAL FLANGE TEES WITH RADIUSED ROOT AND TOES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS
DIN EN 10031:2003-06 SEMI-FINISHED PRODUCTS FOR FORGING - TOLERANCES ON DIMENSIONS, SHAPE AND MASS
DIN EN 10218-2:2012-03 STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 2: WIRE DIMENSIONS AND TOLERANCES
DIN EN 606:2004-11 Bar coding - Transport and handling labels for steel products; German version EN 606:2004
DIN EN 10111:2008-06 CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
DIN EN 10259:1997-07 COLD-ROLLED STAINLESS STEEL WIDE STRIP AND PLATE/SHEET - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10108:2005-01 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
DIN EN 10080:2005-08 STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL
DIN EN 10335:2005-07 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005
DIN EN 10279:2000-03 Hot rolled steel channels - Tolerances on shape, dimensions and mass; English version of DIN EN 10279
DIN EN 10154:2002-08 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
DIN EN 10017:2005-01 Steel rod for drawing and/or cold rolling - Dimensions and tolerances; German version EN 10017:2004
DIN EN 10060:2004-02 Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003
DIN EN 10061:2004-02 Hot rolled hexagon steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10061:2003
I.S. EN 10335:2005 STEEL FOR PACKAGING - FLAT STEEL PRODUCTS INTENDED FOR USE IN CONTACT WITH FOODSTUFFS, PRODUCTS OR BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - NON ALLOYED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL
UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
BS 2989:1992 Specification for continuously hot-dip zinc coated and iron-zinc alloy coated steel flat products: tolerances on dimensions and shape
I.S. EN 12063:1999 EXECUTION OF SPECIAL GEOTECHNICAL WORK - SHEET-PILE WALLS
I.S. EN 10334:2005 STEEL FOR PACKAGING - FLAT STEEL PRODUCTS INTENDED FOR USE IN CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - NON-COATED STEEL (BLACKPLATE)
I.S. EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS

EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 10107:2014 Grain-oriented electrical steel strip and sheet delivered in the fully processed state
EURONORM 54 : 1980 HOT-ROLLED SMALL U-BEAMS
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
ISO 10241:1992 International terminology standards Preparation and layout
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
ISO 6929:2013 Steel products — Vocabulary
EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 39:2001 Loose steel tubes for tube and coupler scaffold - Technical delivery conditions
EN 10140:2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 10106:2015 Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances
EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
EN 10056-2:1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN 10248-2:1995 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10279:2000 Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10034:1993 Structural steel I and H sections - Tolerances on shape and dimensions
PREN 10138-2 : DRAFT 2000 PRESTRESSING STEELS - PART 2: WIRE
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10205:2016 Cold reduced tinmill products - Blackplate
EURONORM 53 : 1962 HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS
EN 10131:2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10024:1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 10092-1:2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
EN ISO 1127:1996 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EURONORM 19 : 1957 IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10278:1999 Dimensions and tolerances of bright steel products
EN 10060:2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10108:2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
EN 10143:2006 Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10250-1:1999 Open die steel forgings for general engineering purposes - Part 1: General requirements
EN 10017:2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10294-1:2005 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels
EN 10296-1:2003 Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10020:2000 Definition and classification of grades of steel
EN 10219-2:2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 10297-1:2003 Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10061:2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059:2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10092-2:2003 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions
PREN 10138-4 : DRAFT 2000 PRESTRESSING STEELS - PART 4: BARS
EN 10055:1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10220:2002 Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10265:1995 Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
EN 10303:2015 Thin magnetic steel strip and sheet for use at medium frequencies
EN 10067:1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
EURONORM 91 : 1981 HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
ISO 1127:1992 Stainless steel tubes Dimensions, tolerances and conventional masses per unit length
EN 10249-2:1995 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.