DEFSTAN 02-117/2(2002) : 2002
Current
The latest, up-to-date edition.
REQUIREMENTS FOR ANCHORING, BERTHING, TOWING AND SECURING TO A BUOY CATEGORY 2
Hardcopy , PDF
English
01-05-2002
TITLE PAGE
SCOPE
FOREWORD
Sponsorship
Conditions of Release
Categories of Naval Defence Standards
Related Documents
Health and Safety
Additional Information
CONTENTS
SECTION 1 - PERFORMANCE SPECIFICATION
1.1 Anchoring
1.2 Berthing Ropes
1.3 Towing Requirements
SECTION 2 - NATIONAL/INTERNATIONAL REGULATIONS
2.1 Certification
2.2 Certification Distribution
SECTION 3 - MILITARY STANDARDS/REQUIREMENTS
3.1 General
3.2 Anchoring
3.2.1 Stud Link Chain Cable
3.2.2 Cable Length
3.2.3 Cable Size
3.2.4 Lugged Anchor Shackle
3.2.5 Lugless Joining Shackle
3.2.6 Lugged Joining Shackle
3.2.7 Swivel Pieces
3.2.8 Blake Slip (or Riding Slip) and Screw
Slip
3.2.9 Compressors
3.2.10 Guillotine
3.2.11 Joggle Shackle
3.3 Berthing
3.4 Towing Arrangements
3.4.1 General Requirements
3.4.2 Towing Hawser and Towing Pendant
3.4.3 Cable Chafing Piece
3.4.4 Towing Slips
3.4.5 Towing Arrangements on Submarines
3.5 Securing to a Buoy
3.5.1 Securing to Buoy Shackle
3.5.2 Picking-up Rope
3.5.3 Braidline Securing to Buoy Bridle
3.5.4 Braidline Anchoring Bridle
3.6 Test and Trials
3.6.1 Cable Holders, Windlasses and Capstans
3.6.2 Harbour and Sea Trials
3.6.3 Clench Plates
3.6.4 Eyeplates
3.7 Preservation of Cable and Associated Equipment
SECTION 4 - DESIGN REQUIREMENTS GUIDANCE
4.1 Anchoring Arrangements
4.1.1 Mock-Ups
4.1.2 Materials
4.1.3 Chequered Plating
4.2 Hawsepipes
4.2.1 Siting
4.2.2 Size
4.2.3 Bolsters
4.2.4 Material
4.2.5 Shell Plating
4.2.6 Hawsepipe Gratings
4.2.7 Cable Washing Facilities
4.2.8 Recessed Anchor Stowage
4.3 Stem Hawsepipe and Bullring
4.4 Naval Pipes
4.4.1 General
4.4.2 Material
4.4.3 Size
4.5 Cable Locker
4.5.1 General
4.5.2 Construction
4.5.3 Volume
4.5.4 Preservation
4.6 Berthing Arrangements
4.6.1 Bollards and Fairleads
SECTION 5 - CORPORATE KNOWLEDGE AND EXPERIENCE
5.1 Spare Equipment
5.2 Blake Slip Position
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS AND DEFINITIONS
ANNEX C - HULL DRAG
ANNEX D - WIND DRAG
ALPHABETICAL INDEX
Describes the equipment, associated and structural requirements for HM Surface Ships and Submarines for anchoring, berthing, securing to a buoy, towing or be towed.
DevelopmentNote |
Supersedes DEFSTAN 02-117/1(2000) (11/2002) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (04/2012)
|
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
Supersedes |
NES 174 : ISSUE 1 AMD 2 | REQUIREMENTS FOR SHIP AND MOORING ANCHORS |
NES 722 : ISSUE 4 | REQUIREMENTS FOR DRAWINGS |
NES 171 : ISSUE 1 AMD 3 | REQUIREMENTS FOR COPPER-BASED ALLOY STUD LINK ANCHOR CABLES AND ASSOCIATED ITEMS OF EQUIPMENT |
BS MA 12-1:1983 | Specification for welded steel bollards Vertical type |
NES 719 : ISSUE 2 AMD 2 | SEA WATER SYSTEMS FOR HM SURFACE SHIPS |
NES 791 PT 3 : ISSUE 2 | REQUIREMENTS FOR WELDABLE STRUCTURAL STEELS - B QUALITY STEEL PLATES AND SECTIONS |
BS 302-2:1987 | Stranded steel wire ropes Specification for ropes for general purposes |
BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
BS MA 19:1973 | Specification for Panama-type fairleads |
NES 729 PT 5 : ISSUE 1 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - ULTRASONIC |
NES 155 PT 2 : ISSUE 3 | REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - REQUIREMENTS FOR SURVEY AND REPAIR OF STEEL SURFACE SHIPS |
NES 113 PT 3 : ISSUE 2 | REQUIREMENTS FOR MECHANICAL HANDLING - ANCHOR CAPSTANS, CAPSTANS AND CABLE HOLDERS |
BS MA 12-2:1983 | Specification for welded steel bollards Cruciform type |
NES 175 : ISSUE 1 AMD 2 | REQUIREMENTS FOR EQUIPMENT ASSOCIATED WITH FORGED STEEL CHAIN CABLE |
BS 3468:1986 | Specification for austenitic cast iron |
NES 172 : ISSUE 2 AMD 2 | REQUIREMENTS FOR FORGED STEEL STUD LINK CHAIN CABLE GRADES 1, 2 AND 3 |
BS EN 696:1995 | Fibre ropes for general service. Polyamide |
BS 7079-A1(1989) : 1989 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: SPECIFICATION FOR RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS |
NES 763 : ISSUE 3 | PRESERVATION AND PAINTING OF COMPARTMENTS IN SURFACE SHIPS |
NES 774 : ISSUE 4 | REQUIREMENTS FOR PREPARATION AND PAINTING SUBMARINES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.