Skip to content
Please enter a keyword to search

  • DEFSTAN 81-147/1(2017) : 2017

    Current The latest, up-to-date edition.

    WATER-VAPOUR RESISTANT MATERIAL AND BAGS FOR PACKAGING

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  14-02-2017

    Publisher:  UK Ministry of Defence Standards

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    0 Introduction
    1 Scope
    2 Information to be supplied by the Purchaser
    3 Packaging
    Annex A - Barrier Material, Aluminium Foil Laminate, Flexible,
              Heat Sealable, Water-vapour Resistant
    Annex B - Reusable Water Vapour Resistant Bags for Engine
              Change Units, Propulsion Units, and Associated Equipment
    Annex C - Methods of Tests

    Abstract - (Show below) - (Hide below)

    Describes the requirements for three types of heat- sealable, flexible, aluminum foil laminates suitable for use in packaging where low water-vapor transmission rates (WVTR) are required.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes DEFSTAN 81-75/3(2005) & DEFSTAN 81-101/3(2016). (05/2017)
    Document Type Standard
    Publisher UK Ministry of Defence Standards
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    BS 381C:1996 Specification for colours for identification, coding and special purposes
    BS ISO 9197:2006 Paper and board. Determination of water-soluble chlorides
    BS 2782-3:Method 332A:1976 Methods of testing plastics. Mechanical properties Stiffness of plastics film
    DEFSTAN 81-41(PT3)/6(2014) : 2014 PACKAGING OF DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TESTING
    BS 2782-3:Methods 320A to 320F:1976 Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus
    BS EN 438-2 : 2016 HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
    BS 2782-1:Method 140D:1997 Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
    BS 7406:1991 Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods
    DEFSTAN 81-41(PT4)/8(2015) : 2015 PACKAGING OF DEFENCE MATERIEL - PART 4: SERVICE PACKAGING INSTRUCTION SHEET (SPIS)
    BS ISO 6588-2:2012 Paper, board and pulps. Determination of pH of aqueous extracts Hot extraction
    DEFSTAN 91-98/2(2001) : 2001 LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 7.5 CST NATO CODE: O-149 JOINT SERVICE DESIGNATION: OX-38
    DEFSTAN 91-90/4(2015) : 2015 GASOLINE AVIATION: GRADES UL91, 100/130 AND 100/130LL JOINT SERVICE DESIGNATION: AVGAS 100 AND AVGAS 100LL
    DEFSTAN 81-41(PT6)/9(2015) : 2015 PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING
    BS EN ISO 6383-1:2015 Plastics. Film and sheeting. Determination of tear resistance Trouser tear method
    BS 3177:1959 Method for determining the permeability to water vapour of flexible sheet materials used for packaging
    BS EN ISO 186:2002 Paper and board. Sampling to determine average quality
    DEFSTAN 68-10/5(2003) : 2003 CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24
    BS 2782-5:Method 540G:1995 Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. Open flame carbon-arc lamps
    DEFSTAN 01-5/18(2016) : 2016 FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
    BS EN ISO 1924-2:2008 Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min)
    DEFSTAN 81-041(PT2)/9(2017) : 2017 PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN
    BS EN ISO 4892-1:2016 Plastics. Methods of exposure to laboratory light sources General guidance
    BS EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
    DEFSTAN 81-132/2(2004) : 2004 PAPER, HUMIDITY INDICATOR, COBALT CHLORIDE
    BS ISO 9198:2001 Paper, board and pulp. Determination of water-soluble sulfates
    BS 903-1:1995 Physical testing of rubber Guide to the selection and use of methods of test for rubber
    BS EN ISO 176:2005 Plastics. Determination of loss of plasticizers. Activated carbon method
    DEFSTAN 81-041(PT5)/8(2017) : 2017 PACKAGING OF DEFENCE MATERIEL - PART 5: PACKAGING PROCESSES
    BS EN ISO 4674-1:2016 Rubber- or plastics-coated fabrics. Determination of tear resistance Constant rate of tear methods
    DEFSTAN 91-100/3(2001) : 2001 LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5CST NATO CODE: O-160 JOINT SERVICE DESIGNATION: OX-26
    DEFSTAN 91-87/6(2009) : 2009 TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII
    BS 2782-1:Method 150B:1976 Methods of testing plastics. Thermal properties Determination of cold flex temperature of flexible polyvinyl compound
    BS 2782-8:Method 820A:1996 Methods of testing plastics. Other properties Determination of water vapour transmission rate (dish method)
    BS 2739:1975 Specification for thick PVC sheeting (calendered, flexible, unsupported)
    BS EN 14469-4:2004 Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Determination of bleeding of colouring materials
    SAE J 1899 : 2011 LUBRICATING OIL, AIRCRAFT PISTON ENGINE (ASHLESS DISPERSANT)
    DEFSTAN 91-48/2(1997) : 1997 HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18
    DEFSTAN 91-94/2(2001) : 2001 LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 3 CST JOINT SERVICE DESIGNATION: OX-7
    DEFSTAN 91-4/9(2013) : 2013 FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76
    DEFSTAN 81-041(PT1)/9(2016) : 2016 PACKAGING OF DEFENCE MATERIEL - PART 1: INTRODUCTION TO DEFENCE PACKAGING REQUIREMENTS
    BS 2782-1:Method 150C:1983 Methods of testing plastics. Thermal properties Determination of low temperature extensibility of flexible polyvinyl chloride sheet
    DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002 LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective