DIN 1045 : 1988 AMD 1 1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION
01-07-2001
12-01-2013
1 General
1.1 Field of application
1.2 Non-standard materials, structural members and
construction methods
2 Concepts
2.1 Concepts relating to construction materials
2.1.1 Reinforced concrete
2.1.2 Concrete
2.1.3 Other materials
2.1.3.1 Cement mortar
2.1.3.2 Aggregate
2.1.3.3 Binders
2.1.3.4 Water
2.1.3.5 Admixtures
2.1.3.6 Additions
2.1.3.7 Reinforcement
2.1.3.6 Additions
2.1.3.7 Reinforcement
2.1.3.8 Filler joists and floor
blocks
2.2 Concepts relating to structural design
2.2.1 Loads
2.2.2 Working loads
2.2.3 Ultimate load
2.2.4 Ordinary commonly occurring buildings
2.2.5 State I
2.2.6 State II
2.2.7 Restraint
2.3 Concrete testing laboratories
2.3.1 Type E concrete testing laboratories
2.3.2 Type F concrete testing laboratories
2.3.3 Type W concrete testing laboratories
3 Documentation
3.1 Technical documents
3.2 Drawings
3.2.1 General
3.2.2 Erection drawings for precast members
3.2.3 Drawings of formwork and falsework
3.3 Design analysis
3.4 Specification of works
Diese Norm gilt für tragende und aussteifende Bauteile aus bewehrtem oder unbewehrtem Normal- oder Schwerbeton mit geschlossenem Gefüge. Sie gilt auch für Bauteile mit biegesteifer Bewehrung, für Stahlsteindecken und für Tragwerke aus Glasstahlbeton.
DevelopmentNote |
Both the Jul88 version and the AMD 1 have English editions.
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
DIN 1053-3:1990-02 | REINFORCED MASONRY - DESIGN AND CONSTRUCTION |
DIN 1048-2:1991-06 | TESTING METHODS FOR CONCRETE; HARDENED CONCRETE IN STRUCTURES AND COMPONENTS |
DIN 4281:1998-08 | CONCRETE FOR PREFABRICATED SEWAGE UNITS - MANUFACTURE, REQUIREMENTS, TESTING AND QUALITY CONTROL |
DIN 1084-1 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - CONCRETE B 2 ON BUILDING SITES |
DIN 4227-1 : 88 AMD 1 95 | PRESTRESSED CONCRETE - STRUCTURAL MEMBERS MADE OF ORDINARY CONCRETE, WITH CONCRETE TENSILE STRESSES OR WITH LIMITED CONCRETE TENSILE STRESSES |
DIN 52170-3:1980-02 | Determination of composition of hardened concrete; hydrochloric acid insoluble aggregate, materials used for the concrete not available |
DIN 1048-1:1991-06 | TESTING CONCRETE - TESTING OF FRESH CONCRETE |
DIN 1084-2:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - PRECAST COMPONENTS |
DIN 1084-3:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - READY-MIXED CONCRETE |
DIN 1084-1:1978-12 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - CONCRETE B 2 ON BUILDING SITES |
DIN 4212:1986-01 | REINFORCED CONCRETE AND PRESTRESSED CONCRETE CRANEWAYS; DESIGN AND CONSTRUCTION |
VDI/BV-BS 6205 Blatt 3:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Design and application |
VDI/BV-BS 6205 Blatt 1:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - General principles |
VDI/BV-BS 6205 Blatt 2:2012-04 | Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
DIN 4131:1991-11 | STEEL RADIO TOWERS & MASTS |
DIN 1084-3 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - READY-MIXED CONCRETE |
VDE 0151 : 1986 | MATERIALS AND SIZE REQUIREMENTS FOR EARTH ELECTRODES FROM THE CORROSION POINT OF VIEW |
DIN 4024-2:1991-04 | MACHINE FOUNDATIONS; RIGID SUPPORTING CONSTRUCTIONS FOR MACHINES WITH PERIODIC EXCITATION |
DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
DIN 4261-2:1984-06 | SMALL SEWAGE TREATMENT PLANTS; PLANTS WITH SEWAGE AERATION; APPLICATION, DESIGN, CONSTRUCTION AND TESTING |
DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
DIN 18799-3:1999-08 | LADDERS FOR CONSTRUCTION WORKS - PART 3: LADDERS FOR CHIMNEYS - SAFETY REQUIREMENTS AND TESTS |
DIN 4235-2:1978-12 | COMPACTING OF CONCRETE BY VIBRATING; COMPACTING BY INTERNAL VIBRATORS |
DIN 28052-4:1995-12 | CHEMICAL APPARATUS - SURFACE TREATMENT OF CONCRETE COMPONENTS IN PROCESS PLANTS USING NON-METALLIC MATERIALS - PART 4: COATING |
DIN 18515-1:1998-08 | CLADDING FOR EXTERNAL WALLS - PART 1: TILES FIXED WITH MORTAR - PRINCIPLES OF DESIGN AND APPLICATION |
VDI 3975 Blatt 1:2002-03 (Draft) | Storages of hazardous substances - Planning and approval |
VDI 6000 Blatt 4:2006-11 | Provision and installation of sanitary facilities - Hotel rooms |
VDI/BV-BS 6000 Blatt 1.1:2012-02 | Provision and installation of sanitary facilities - Generic aspects and systems; Prefabricated sanitary modules (prefabricated sanitary rooms, installation systems) |
VDI 2510:2005-10 | Automated Guided Vehicle Systems (AGVS) |
VDI 2510 Blatt 1:2009-12 | Infrastructure and peripheral installations for Automated Guides Vehicle Systems (AGVS) |
VDI 2095 Blatt 1:2011-03 | Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities |
VDI 2075:2003-07 | Ice sport facilities - Building Services |
VDI 3577:2009-02 | Industrial trucks for high-bay warehouses - Specification and operating conditions |
VDE 0210 : 1985 | PLANNING AND DESIGN OF OVERHEAD POWER LINES WITH RATED VOLTAGES ABOVE 1 KV |
DIN 18082-3:1984-01 | FIRE BARRIERS - STEEL DOORS T 30-1 - CONSTRUCTION TYPE B |
DIN 4701-1:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; BASIC RULES FOR CALCULATION |
DIN 25452:1992-04 | MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS |
DIN VDE 0151 : 1986 | MATERIAL AND MINIMUM DIMENSIONS OF EARTH ELECTRODES WITH RESPECT TO CORROSION |
DIN 68701:1993-09 | WOOD BLOCK FLOORING FOR INDUSTRIAL USE |
DIN 4133:1991-11 | STEEL STACKS |
DIN 4024-1:1988-04 | MACHINE FOUNDATIONS - ELASTIC SUPPORTING CONSTRUCTIONS FOR MACHINES WITH ROTATING MASSES |
DIN 18807-3:1987-06 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - STRENGTH ANALYSIS, STRUCTURAL DESIGN |
DIN VDE 0210 : 1985 | PLANNING AND DESIGN OF OVERHEAD POWER LINES WITH RATED VOLTAGES ABOVE 1 KV |
DIN 1999-1:1976-08 | SEPARATORS FOR LIGHT LIQUIDS, PETROL-SEPARATORS, FUEL OIL SEPARATORS - PRINCIPLES OF CONSTRUCTION |
DIN 4102-2:1977-09 | BEHAVIOUR OF BUILDING MATERIALS AND COMPONENTS IN FIRE - BUILDING COMPONENTS - DEFINITIONS, REQUIREMENTS AND TESTS |
DIN 32933-1:1990-07 | STATIONARY TRAINING EQUIPMENT; CLASS S; SAFETY REQUIREMENTS, TESTING |
DIN 4095:1990-06 | SUBSOIL; DRAINAGE FOR THE PROTECTION OF STRUCTURES; PLANNING, DESIGN AND EXECUTION |
DIN 1048-5:1991-06 | TESTING CONCRETE - TESTING OF HARDENED CONCRETE (SPECIMENS PREPARED IN MOULD) |
DIN 1048-4:1991-06 | TEST METHODS FOR CONCRETE - DETERMINATION OF THE COMPRESSIVE STRENGTH IN HARDENED CONCRETE IN STRUCTURES AND COMPONENTS - APPLICATION OF REFERENCE LINES AND EVALUATION WITH SPECIAL METHODS |
DIN 1084-2 E : 1978 | CONTROL (QUALITY CONTROL) OF CONCRETE STRUCTURES AND REINFORCED CONCRETE STRUCTURES - PRECAST COMPONENTS |
DIN 4035:1995-08 | REINFORCED CONCRETE PIPES AND SUITABLE FITTINGS - DIMENSIONS, TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN 4102-5:1977-09 | BEHAVIOUR OF BUILDING MATERIALS AND COMPONENTS IN FIRE - FIRE BARRIERS, BARRIERS IN LIFT WELLS AND AGAINST FIRE RESISTANT GLAZINGS - DEFINITIONS, REQUIREMENTS AND TESTS |
DIN 52170-1:1980-02 | Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density |
BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
DIN 1048-4:1991-06 | TEST METHODS FOR CONCRETE - DETERMINATION OF THE COMPRESSIVE STRENGTH IN HARDENED CONCRETE IN STRUCTURES AND COMPONENTS - APPLICATION OF REFERENCE LINES AND EVALUATION WITH SPECIAL METHODS |
DIN 1048-1:1991-06 | TESTING CONCRETE - TESTING OF FRESH CONCRETE |
DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
DIN 18195:2015-06 (Draft) | WATERPROOFING OF BUILDINGS - VOCABULARY |
DIN 4243:1978-03 | GLASSES FOR FLOORS OF REINFORCED CONCRETE; REQUIREMENTS AND TESTS |
DIN 488-1:2009-08 | Reinforcing steels - Part 1: Grades, properties, marking |
DIN 1055-5:2005-07 | ACTIONS ON STRUCTURES - PART 5: SNOWLOADS AND ICE LOADS |
DIN 17100:1980-01 | STEELS FOR GENERAL STRUCTURAL PURPOSES - QUALITY STANDARD |
DIN 52100:1939-07 | TESTING OF NATURAL STONES; GUIDELINES FOR THE TESTING AND THE SELECTION OF NATURAL STONES |
DIN 1164:2000-11 | SPECIAL CEMENT - COMPOSITION, SPECIFICATIONS AND ATTESTATION OF CONFORMITY |
DIN 1048-2:1991-06 | TESTING METHODS FOR CONCRETE; HARDENED CONCRETE IN STRUCTURES AND COMPONENTS |
DIN 4226-4:1983-04 | AGGREGATES FOR CONCRETE; INSPECTION |
DIN 1055-1:2002-06 | ACTION ON STRUCTURES - PART 1: DENSITIES AND WEIGHTS OF BUILDING MATERIALS, STRUCTURAL ELEMENTS AND STORED MATERIALS |
DIN 1055-2:2010-11 | Actions on structures - Part 2: Soil properties |
DIN 1164-100:1990-03 | CEMENT - PORTLAND OIL SHALE CEMENT - REQUIREMENTS, TESTING AND INSPECTION |
DIN 4227-1 : 88 AMD 1 95 | PRESTRESSED CONCRETE - STRUCTURAL MEMBERS MADE OF ORDINARY CONCRETE, WITH CONCRETE TENSILE STRESSES OR WITH LIMITED CONCRETE TENSILE STRESSES |
DIN 51043:1979-08 | Trass; Requirements, Tests |
DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
DIN 4108-2:2013-02 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 2: MINIMUM REQUIREMENTS TO THERMAL INSULATION |
DIN 4030 : 1969 | EVALUATION OF LIQUIDS, SOILS AND GASES, AGGRESSIVE TO CONCRETE |
DIN 4187-2:1974-04 | SCREENING SURFACES; PERFORATED PLATES FOR TEST SIEVES, SQUARE HOLE PERFORATIONS |
DIN 4226-3:1983-04 | AGGREGATES FOR CONCRETE; TESTING OF HEAVY AND LIGHTWEIGHT AGGREGATES |
DIN 53237:1977-02 | TESTING OF PIGMENTS; PIGMENTS FOR COLOURATION OF BUILDING MATERIALS BASED ON CEMENT OR LIME |
DIN 4035:1995-08 | REINFORCED CONCRETE PIPES AND SUITABLE FITTINGS - DIMENSIONS, TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
DIN 4188-1:1977-10 | SCREENING SURFACES, WIRE SCREENS FOR TEST SIEVES, DIMENSIONS |
DIN 1055-3:2006-03 | ACTION ON STRUCTURES - PART 3: SELF-WEIGHT AND IMPOSED LOAD IN BUILDING |
DIN 488-4:2009-08 | Reinforcing steels - Welded fabric |
DIN 4159:2014-05 | FLOOR BRICKS AND PLASTERBOARDS, STATICALLY ACTIVE |
DIN 4281:1998-08 | CONCRETE FOR PREFABRICATED SEWAGE UNITS - MANUFACTURE, REQUIREMENTS, TESTING AND QUALITY CONTROL |
DIN 267-1:1982-08 | FASTENERS - TECHNICAL DELIVERY CONDITIONS - GENERAL REQUIREMENTS |
DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.