DIN 16963-11:1999-10
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS
Hardcopy , PDF
01-01-2011
English
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Masse, Bezeichnung
3.1 Allgemeines
3.2 Bundbuchsen
3.3 Flansche (Pos. Nr. 11)
3.4 Dichtringe
3.4.1 Flachdichtring (Pos. Nr. 10)
3.4.2 Runddichtring (Pos. Nr. 13)
4 Werkstoff
5 Ausführung
6 Kennzeichnung der Bundbuchsen
Anhang A (informativ) Literaturhinweise
This standard is included in DIN Handbook 52, 62-2 and 62 CD. Applies to bushes, flanges and seals for socket-welded flanged joints for connecting pipes for high density polyethylene (HDPE) Type 1 and Type 2 in accordance with DIN 8074 Part 1 or Part 2, and for connecting pipes and pipe elements of other material for pressure pipelines. The bushes and flanges of HDPE Types 1 and 2 must conform to the requirements of DIN 16963 Part 5 or Part 25.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| DIN 8075 Beiblatt 1:1984-02 | HIGH-DENSITY POLYETHYLENE (HDPE) PIPES - CHEMICAL RESISTANCE OF PIPES AND FITTINGS |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 62 CD : 7ED 2004 | WASSERVERSORGUNG 2 - GUSS-, KUNSTSTOFF-, STAHLBETON- UND STAHLROHRE FUER WASSERLEITUNGEN |
| DIN 16963-15:1987-06 | PIPE JOINT ASSEMBLIES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) PRESSURE PIPES - THREADED PIPE JOINTS - DIMENSIONS |
| DIN 16963-13:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE; TYPE 1 AND 2, TURNED AND PRESSED SOCKETS REDUCING FOR BUTT WELDING; DIMENSIONS |
| DIN 16963-10:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE); TYPE 1 AND 2, SOCKETS AND CAPS INJECTION MOULDED FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 62-2 : 8ED 2010 | |
| DIN 16963-14:1983-06 | PIPE JOINT AND THEIR ELEMENTS FOR PIPES OF HIGH DENSITY POLYETHYLENE (HDPE) UNDER PRESSURE - TYPE 1 AND 2, SOCKET REDUCING AND UNIONS INJECTION MOULDED FOR SOCKET WELDING - DIMENSIONS |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN 8063-4:1983-09 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF UNPLASTICIZED POLYVINYLCHLORIDE (UNPLASTICIZED PVC) UNDER PRESSURE - BRUSHINGS, FLANGES, GASKETS - DIMENSIONS |
| DIN 8063-5:1999-10 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN EN 573-3:2013-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
| DIN 7728-1:1988-01 | PLASTICS - SYMBOLS AND CODES FOR POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 28091-2:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 2: REQUIREMENTS AND TESTING FOR FIBRE-BASED GASKET MATERIALS (FA) |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| PREN 1092-1 : DRAFT 2016 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 60893-1 : 2004 | INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS |
| PREN 682 : DRAFT 1998 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| DIN 28091-1:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 60893-1:2004 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.