DIN 25452:1992-04
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS
01-09-2003
12-01-2013
Grundlagen
1 Anwendungsbereich
2 Lastarten
2.1 Lastarten für Bauteile aus Stahl oder Komponenten
2.2 Lastarten für Bauteile aus Stahlbeton
3 Lastfälle und Lastkombinationen
3.1 Lastfälle und Lastkombinationen für Bauteile
aus Stahl oder Komponenten
3.2 Lastfälle und Lastkombinationen für Bauteile
aus Stahlbeton
4 Bemessung
4.1 Bemessung von Bauteilen aus Stahl oder Komponenten
4.2 Bemessung von Bauteilen aus Stahlbeton
5 Zulässige Beanspruchungen
5.1 Zulässige Spannungen für Bauteile aus Stahl
oder Komponenten
5.2 Zulässige Beanspruchungen für Bauteile aus
Stahlbeton
6 Werkstoffe und Werkstoffprüfungen
6.1 Werkstoffe
6.2 Werkstoffprüfungen
Anhang A Werkstoffprüfblätter
Anhang B Bestimmungen, auf die in dieser Norm
verwiesen wird
DevelopmentNote |
Supersedes DIN 25428 (07/2002)
|
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Withdrawn
|
Supersedes |
DIN 1048-4:1991-06 | TEST METHODS FOR CONCRETE - DETERMINATION OF THE COMPRESSIVE STRENGTH IN HARDENED CONCRETE IN STRUCTURES AND COMPONENTS - APPLICATION OF REFERENCE LINES AND EVALUATION WITH SPECIAL METHODS |
DIN 1048-1:1991-06 | TESTING CONCRETE - TESTING OF FRESH CONCRETE |
DIN 488-2:2009-08 | Reinforcing steels - Reinforcing steel bars |
DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
DIN 1045 : 1988 AMD 1 1996 | STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION |
DIN 488-7:1986-06 | REINFORCING STEEL; VERIFICATION AND WELDABILITY OF REINFORCING STEEL BARS; TEST PROCEDURE AND EVALUATION |
DIN 302:2011-03 | Countersunk head rivets - Nominal diameters 10 mm to 36 mm |
DIN 267-11:1980-01 | FASTENERS - TECHNICAL DELIVERY CONDITIONS (WITH ADDITIONS TO ISO 3506) - CORROSION-RESISTANT STAINLESS STEEL FASTENERS |
DIN 488-1:2009-08 | Reinforcing steels - Part 1: Grades, properties, marking |
DIN 17100:1980-01 | STEELS FOR GENERAL STRUCTURAL PURPOSES - QUALITY STANDARD |
DIN 4114-2:1953-02 | STEEL CONSTRUCTION; STABILITY CASES (BUCKLING, TILTING, BULGING), DESIGN PRINCIPLES, GUIDELINES |
DIN 17445:1984-11 | STAINLESS STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 7990:2017-08 | HEXAGON HEAD BOLTS WITH HEXAGON NUT FOR STEEL STRUCTURES |
DIN 1048-2:1991-06 | TESTING METHODS FOR CONCRETE; HARDENED CONCRETE IN STRUCTURES AND COMPONENTS |
DIN 488-6:2010-01 | Reinforcing steel - Part 6: Assessment of conformity |
DIN 4227-1 : 88 AMD 1 95 | PRESTRESSED CONCRETE - STRUCTURAL MEMBERS MADE OF ORDINARY CONCRETE, WITH CONCRETE TENSILE STRESSES OR WITH LIMITED CONCRETE TENSILE STRESSES |
DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 4133:1991-11 | STEEL STACKS |
DIN 488-5:2009-08 | Reinforcing steels - Lattice girders |
DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 17155:1983-10 | CREEP RESISTANT STEEL PLATE AND STRIP - TECHNICAL DELIVERY CONDITIONS |
DIN 6914:1989-10 | HEXAGON BOLTS WITH LARGE WIDTHS ACROSS FLATS FOR HIGH TENSILE STRUCTURAL BOLTING |
DIN 488-4:2009-08 | Reinforcing steels - Welded fabric |
DIN 488-3:2009-08 | Reinforcing steels - Reinforcing steel in coils, steel wire |
DIN 1543:1981-10 | STEEL FLAT PRODUCTS - HOT ROLLED PLATE 3 TO 150 MM THICK - PERMISSIBLE DEVIATIONS OF DIMENSION, WEIGHT AND FORM |
DIN 4114-1:1952-07 | STEEL STRUCTURES; STABILITY (BUCKLING, OVERTURNING, BULGING), METHOD OF CALCULATION, REGULATIONS |
DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
DIN 267-5:1986-02 | FASTENERS - TECHNICAL DELIVERY CONDITIONS - ACCEPTANCE INSPECTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.