• There are no items in your cart

DIN 4133:1991-11

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

STEEL STACKS

Superseded date

01-07-2007

Published date

12-01-2013

1 Anwendungsbereich
2 Begriffe
   2.1 Schornstein
   2.2 Tragrohr
   2.3 Abgasführendes Rohr
   2.4 Innenrohr
   2.5 Einwandiger Schornstein
   2.6 Doppelwandiger Schornstein
   2.7 Freistehender Schornstein
   2.8 Abgespannter Schornstein
   2.9 Abgestützter Schornstein
   2.10 Auskleidung
3 Bautechnische Unterlagen
   3.1 Allgemeines
   3.2 Erläuterung der chemischen und thermischen
        Betriebsverhältnisse
   3.3 Baubeschreibung
   3.4 Standsicherheitsnachweis
   3.5 Zeichnungen
4 Baustoffe
   4.1 Allgemeines
   4.2 Stähle
   4.3 Stählerne Abspannseile
   4.4 Verbindungsmittel
   4.5 Dämmstoffe
   4.6 Auskleidungen
5 Einwirkungen
   5.1 Allgemeines
   5.2 Eigenlastt
   5.3 Vorspannkraft
   5.4 Windlast
   5.5 Verkehrslast und Schneelast
   5.6 Eislast
   5.7 Wärmeeinwirkung
   5.8 Planmässiger Unter- und Überdruck
   5.9 Lasten aus Bauzuständen
   5.10 Änderungen der Stützbedingungen
   5.11 Erdbeben
   5.12 Anprall
6 Ermittlung der Schnittgrössen
   6.1 Allgemeines
   6.2 Freistehende Schornsteine
   6.3 Abgespannte Schornsteine
        6.3.1 Zu untersuchende Windrichtungen
        6.3.2 Näherung bei verschieden geneigten
              und verschieden langen Abspannseilen
              eines Abspannsternes
        6.3.3 Näherung bei abgespannten Schornsteinen
              bis 40 m Höhe
   6.4 Gründung
7 Bemessung
   7.1 Trag- und Innenrohr
        7.1.1 Tragsicherheitsnachweis
        7.1.2 Beulsicherheitsnachweis
        7.1.3 Betriebsfestigkeitsnachweis
   7.2 Gründung
        7.2.1 Allgemeines
        7.2.2 Fundament
        7.2.3 Standsicherheit
8 Konstruktion
   8.1 Allgemeines
   8.2 Mindestwanddicke
   8.3 Tragrohr
        8.3.1 Verbindungen
        8.3.2 Öffnungen
   8.4 Innenrohr
   8.5 Auskleidungen
   8.6 Abspannseile
        8.6.1 Allgemeines
        8.6.2 Seilklemmen
        8.6.3 Seilverbindungen
   8.7 Wärmedämmung
   8.8 Gründung und Verankerung
   8.9 Ausrüstung
        8.9.1 Einrichtungen zum Besteigen
        8.9.2 Bühnen
        8.9.3 Flugsicherung
        8.9.4 Blitzschutz- und Erdungsanlagen
9 Korrosionsschutz
   9.1 Allgemeines
   9.2 Chemische Einwirkung
        9.2.1 Allgemeines
        9.2.2 Einwirkung aufgrund von Schwefeloxiden
        9.2.3 Einwirkung aufgrund von Chloriden und
              Fluoriden
   9.3 Massnahmen gegen Korrosion
        9.3.1 Beschichtungen und Überzüge
        9.3.2 Auskleidungen
        9.3.3 Korrosionszuschlag zur Blechdicke
        9.3.4 Wahl geeigneter nichtrostender Stähle
10 Ausführung
   10.1 Allgemeines
   10.2 Geschweisste Schornsteine aus Stahl
   10.3 Einbringen der Vorspannkräfte
   10.4 Korrosionsschutz
11 Zustandsüberwachung
Anhang A Windlastannahmen
Anhang B Betriebsfestigkeitsnachweis
Zitierte Normen und andere Unterlagen
Änderungen

This standard is included in DIN Handbook 59, 143 and 144.

DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

DIN HDBK 143 : 6ED 2002 STANDARDS FOR CORROSION PROTECTION OF STEEL BY ORGANIC AND METALLIC COATINGS 1 - DIN 267-10 TO DIN 80200
DIN 18160-1:2001-12 CHIMNEYS - PART 1: DESIGN AND PERFORMANCE
DIN 18799-3:1999-08 LADDERS FOR CONSTRUCTION WORKS - PART 3: LADDERS FOR CHIMNEYS - SAFETY REQUIREMENTS AND TESTS
DIN 25452:1992-04 MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS

DIN VDE 0185-1 : 1982 LIGHTNING PROTECTION SYSTEM - GENERAL WITH REGARD TO INSTALLATION
DIN 17441:1997-02 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES
DIN 1045 : 1988 AMD 1 1996 STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION
DIN 4030-1:2008-06 Assessment of water, soil and gases for their aggressiveness to concrete - Part 1: Principles and limiting values
DIN 1142:1982-01 WIRE ROPE GRIPS FOR ROPE TERMINATIONS TO MEET SAFETY REQUIREMENTS
DIN 1055-5:2005-07 ACTIONS ON STRUCTURES - PART 5: SNOWLOADS AND ICE LOADS
DIN 55928-8:1994-07 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - PART 8: PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS FROM CORROSION
DIN 17456:1999-02 SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 18800-4:2008-11 STEEL STRUCTURE - PART 4: STABILITY - ANALYSIS OF SAFETY AGAINST BUCKLING OF SHELLS
DIN 55928-9:1991-05 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS - COATING MATERIALS - COMPOSITION OF BINDERS AND PIGMENTS
DIN 51603-3:2016-08 (Draft) LIQUID FUELS - FUEL OILS - PART 3: FUEL OIL S, MINIMUM REQUIREMENTS
DIN 55928-1:1991-05 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; GENERAL, TERMS AND DEFINITIONS, CORROSIVE STRESSES
DIN 1055-1:2002-06 ACTION ON STRUCTURES - PART 1: DENSITIES AND WEIGHTS OF BUILDING MATERIALS, STRUCTURAL ELEMENTS AND STORED MATERIALS
DIN 1055-2:2010-11 Actions on structures - Part 2: Soil properties
DIN 1056:2009-01 SOLID CONSTRUCTION, FREE-STANDING CHIMNEYS - BRICK LINERS - CALCULATION AND DESIGN
DIN 24532:1981-05 VERTICAL FIXED LADDERS MADE OF IRON
DIN 4102-1:1998-05 FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS
DIN 50049:1992-04 METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS
DIN 8560:1982-05 APPROVAL TESTING OF WELDERS; FUSION WELDING; STEELS
DIN 55928-3:1991-05 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; PLANNING OF CORROSION-PROTECTIVE WORK
DIN 55928-7:1991-05 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; TECHNICAL RULES FOR REFERENCE AREAS
DIN 55928-5:1991-05 CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; COATING MATERIALS AND PROTECTIVE SYSTEMS
DIN 17455:1999-02 WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS
DIN 55928-4:1991-05 CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; PREPARATION AND TESTING OF SURFACES
DIN 51603-1:2016-08 (Draft) LIQUID FUELS - FUEL OILS - PART 1: FUEL OILS EL, MINIMUM REQUIREMENTS
DIN 17155:1983-10 CREEP RESISTANT STEEL PLATE AND STRIP - TECHNICAL DELIVERY CONDITIONS
DIN 1055-3:2006-03 ACTION ON STRUCTURES - PART 3: SELF-WEIGHT AND IMPOSED LOAD IN BUILDING
DIN 1054:2010-12 Subsoil - Verification of the safety of earthworks and foundations - Supplementary rules to DIN EN 1997-1
DIN 55928-6:1991-05 PROTECTION OF STEEL STRUCTURES FROM CORROSION BY ORGANIC AND METALLIC COATINGS; WORKMANSHIP AND INSPECTION OF CORROSION-PROTECTIVE WORK
DIN 18800-7:2008-11 STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION
DIN 24533:1984-04 STEEL RAILINGS
DIN 17440:2001-03 STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
VBG 74 : 1997 LADDERS AND STEPS
DIN 32770:1986-07 PROTECTIVE EQUIPMENT AGAINST FALL; SELF-LOCKING SAFETY ANCHORAGES; SAFETY REQUIREMENTS, TESTING
DIN 55928-2:1991-05 CORROSION PROTECTION OF STEEL STRUCTURES BY THE APPLICATION OF ORGANIC OR METALLIC COATINGS; DESIGNING FOR THE PREVENTION OF CORROSION
DIN 18160-1:2001-12 CHIMNEYS - PART 1: DESIGN AND PERFORMANCE

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.