DIN 50145:1975-05
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TESTING OF METALLIC MATERIALS; TENSILE TEST
Available format(s)
Hardcopy , PDF
Superseded date
01-04-1991
Superseded by
Language(s)
English
Published date
01-01-1975
DocumentType |
Standard
|
Pages |
32
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ISO 6892:1998 | Similar to |
ISO 783:1999 | Similar to |
DIN 1628:1984-10 | HIGH PERFORMANCE WELDED CIRCULAR UNALLOYED STEEL TUBES - TECHNICAL DELIVERY CONDITIONS |
DIN 1626:1984-10 | WELDED CIRCULAR UNALLOYED STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 1714:1981-11 | COPPER-ALUMINIUM CASTING ALLOYS (CAST ALUMINIUM BRONZE) - CASTINGS |
DIN 17162-2:1980-09 | FLAT STEEL PRODUCTS - HOT-DIP ZINC-COATED STRIP AND SHEET - TECHNICAL CONDITIONS OF DELIVERY - STRUCTURAL STEELS FOR GENERAL USE |
DIN 29657:1991-01 | AEROSPACE - SEAMLESS STRUCTURAL TUBES IN STEEL AND NICKEL ALLOYS - TECHNICAL SPECIFICATION |
DIN 2395-2:1994-09 | RECTANGULAR AND SQUARE WELDED PRECISION STEEL TUBES - PART 2: TECHNICAL TERMS OF DELIVERY FOR GENERAL USE |
DIN 1652-3:1990-11 | BRIGHT STEEL MADE FROM CASE HARDENING STEEL - TECHNICAL DELIVERY CONDITIONS |
DIN 1736-2:1985-08 | WELDING FILLER METALS FOR NICKEL AND NICKEL ALLOYS - SAMPLE, TEST PIECES, MECHANICAL PROPERTIES |
DIN 15428:1978-08 | LIFTING APPLIANCES; LOAD SUSPENDING DEVICES, TECHNICAL SPECIFICATIONS |
DIN 65038-1:1989-08 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOYS BARS; TECHNICAL SPECIFICATION |
DIN 40501-3:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-AL AND E-ALMgSiO.5 BARS AND SECTION; TECHNICAL DELIVERY CONDITIONS |
DIN 17655:1981-11 | UNALLOYED AND LOW ALLOY, COPPER MATERIALS FOR CASTINGS - CASTINGS |
DIN 28062:1978-08 | CHEMICAL EQUIPMENT; BUILDING MATERIALS FOR BRICK LINING, CLASSIFICATION, PROPERTIES, TESTING |
DIN 2528:1991-06 | STEEL FLANGES - TECHNICAL DELIVERY CONDITIONS |
DIN 40501-1:1985-06 | ALUMINIUM FOR ELECTRICAL PURPOSES; E-Al PLATE, SHEET AND STRIP; TECHNICAL DELIVERY CONDITIONS |
DIN 29544:1990-10 | Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
DIN 65035:1993-11 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOY STOCK, FORGINGS AND RINGS; TECHNICAL SPECIFICATION |
DIN 28600:1983-01 | DUCTILE IRON PRESSURE PIPES AND FITTINGS FOR GAS AND WATER PIPELINES - TECHNICAL DELIVERY CONDITIONS |
DIN 9715:1982-08 | MAGNESIUM SEMI-FINISHED PRODUCTS; PROPERTIES |
DIN 18807-2 : 1987 AMD 1 2001 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - EXECUTION AND EVALUATION OF ULTIMATE STRENGTH TESTS |
DIN 1716:1981-11 | COPPER LEAD TIN ALLOYS CASTING (HIGH LEADED BRONZES) |
DIN 29547:1990-10 | Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design |
DIN 1788:1983-02 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP WITH THICKNESSES BETWEEN 0,021 AND 0,350 MM - PROPERTIES |
DIN 1694:1981-09 | AUSTENITIC CAST IRON |
DIN 1785:1983-10 | WROUGHT COPPER AND COPPER ALLOY TUBES FOR CONDENSERS AND HEAT EXCHANGERS |
DIN 1691:1985-05 | FLAKE GRAPHITE CAST IRON (GREY CAST IRON) - PROPERTIES |
DIN 1630:1984-10 | HIGH PERFORMANCE SEAMLESS CIRCULAR UNALLOYED STEEL TUBES - TECHNICAL DELIVERY CONDITIONS |
DIN 17172:1978-05 | STEEL PIPES FOR LONG DISTANCE PIPELINES FOR COMBUSTIBLE LIQUIDS AND GASES - TECHNICAL CONDITIONS OF DELIVERY |
DIN 17230:1980-09 | BALL AND ROLLER BEARING STEELS - TECHNICAL CONDITIONS OF DELIVERY |
DIN 17122:1978-03 | STEEL CONDUCTOR CONTACT RAILS FOR ELECTRIC TRACTION; TECHNICAL CONDITIONS OF DELIVERY |
DIN 17145:1980-05 | ROUND WIRE ROD FOR WELDING FILLER METALS - TECHNICAL CONDITIONS OF DELIVERY |
DIN 8526:1977-11 | TESTING OF SOLDERING JOINTS; GAP SOLDERED JOINTS, SHEAR TEST, CREEP SHEAR TEST |
DIN 17111:1980-09 | LOW CARBON UNALLOYED STEELS FOR BOLTS, NUTS AND RIVETS - TECHNICAL CONDITIONS OF DELIVERY |
DIN 17177:1979-05 | ELECTRIC PRESSURE-WELDED STEEL TUBES FOR ELEVATED TEMPERATURES - TECHNICAL CONDITIONS OF DELIVERY |
VDI 3968 Blatt 3:1994-01 | Safety of load units; strapping systems |
DIN 1652-2:1990-11 | BRIGHT STEEL MADE FROM STRUCTURAL STEEL - TECHNICAL DELIVERY CONDITIONS |
DIN 17445:1984-11 | STAINLESS STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
DIN 40500-3:1980-04 | COPPER FOR ELECTRICAL PURPOSES; SECTIONS, RODS, BARS, TECHNICAL TERMS OF DELIVERY |
DIN 17443:1986-04 | ROLLED AND WROUGHT STAINLESS STEEL PRODUCTS FOR SURGICAL IMPLANTS - TECHNICAL DELIVERY CONDITIONS |
DIN 53449-3:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENTAL STRESS CRACKING (ESC); BEN STRIP METHOD |
DIN 40500-1:1980-04 | COPPER FOR ELECTRICAL PURPOSES; SHEET AND STRIP, TECHNICAL TERMS OF DELIVERY |
DIN 29783:1983-04 | AEROSPACE - PRECISION CASTINGS OF TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION |
DIN 1624:1987-06 | FLAT PRODUCTS OF STEEL - COLD ROLLED NARROW STRIP IN WIDTHS < 650 MM OF MILD UNALLOYED STEELS - TECHNICAL DELIVERY CONDITIONS |
DIN 65034:1992-06 | Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design |
DIN 1651:1988-04 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS |
DIN 65113:1990-10 | Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
DIN 17752:2002-09 | RODS AND BARS OF WROUGHT AND NICKEL ALLOYS - PROPERTIES |
DIN 53449-2:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENT STRESS CRACKING (ESC); CONSTANT TENSILE STRESS METHOD |
DIN 83302:1990-05 | FIBRE ROPE SLINGS; SAFETY REQUIREMENTS AND TESTING |
DIN 17865:1990-11 | TITANIUM AND TITANIUM ALLOY CASTINGS - INVESTMENT CASTINGS, RAMMED GRAPHITE CASTINGS |
DIN 17280:1985-07 | STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS |
DIN 29531:1990-09 | Aerospace; castings of aluminium and magnesium alloys; technical specification |
DIN 17670-1:1983-12 | WROUGHT COPPER AND COPPER ALLOY PLATE, SHEET AND STRIP - PROPERTIES |
DIN 29546:1990-10 | Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design |
DIN 2609:1991-02 | STEEL BUTT-WELDING PIPE FITTINGS - TECHNICAL DELIVERY CONDITIONS |
DIN 15404-1:1989-12 | LIFTING HOOKS, TECHNICAL CONDITIONS FOR FORGED HOOKS |
DIN 17615-1:1987-01 | ALMGSIO,5 PRECISION PROFILES - TECHNICAL DELIVERY CONDITIONS |
DIN 1745-1:1983-02 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY PLATE, SHEET AND STRIP GREATER THAN 0,35 MM IN THICKNESS - PROPERTIES |
DIN 29543:1990-10 | Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design |
DIN 65186:1990-10 | Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design |
DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
DIN 65021:1986-11 | AEROSPACE; SHEET, PLATE AND STRIP OF STEEL, NICKEL ALLOYS AND COBALT ALLOYS; TECHNICAL SPECIFICATION |
DIN 60060-1:1991-10 | WEBBING LOAD RESTRAINT ASSEMBLIES MADE FROM SYNTHETIC FIBRES FOR USE ON COMMERCIAL VEHICLES |
DIN 17471:1983-04 | RESISTANCE ALLOYS |
DIN 53449-1:1984-05 | TESTING OF PLASTICS; EVALUATION OF ENVIRONMENTAL STRESS CRACKING (ESC); BALL OR PIN IMPRESSION METHOD |
DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 2395-3:1981-08 | RECTANGULAR AND SQUARE ELECTRIC-WELDED PRECISION STEEL TUBES - DIMENSIONS AND TECHNICAL CONDITIONS OF DELIVERY FOR TUBES TO BE USED IN MOTOR VEHICLE CONSTRUCTION |
DIN 61360-2:1986-03 | SYNTHETIC FIBRE LIFTING SLINGS - SAFETY REQUIREMENTS AND TESTING |
DIN 4035:1995-08 | REINFORCED CONCRETE PIPES AND SUITABLE FITTINGS - DIMENSIONS, TECHNICAL SPECIFICATIONS FOR DELIVERY |
DIN 50118:1982-01 | TESTING OF METALLIC MATERIALS; STRESS-RUPTURE TEST, CREEP TEST WITH TENSILE STRESS |
DIN 1652-4:1990-11 | BRIGHT STEEL MADE FROM STEEL FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
DIN 1692:1982-01 | MALLEABLE CAST IRON - CONCEPTS, PROPERTIES |
DIN 1654-1:1989-10 | COLD HEADING AND COLD EXTRUDING STEELS - TECHNICAL DELIVERY CONDITIONS - GENERAL |
DIN 40500-2:1980-04 | COPPER FOR ELECTRICAL PURPOSES; TUBES, TECHNICAL TERMS OF DELIVERY |
DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 65166:1986-09 | AEROSPACE; WROUGHT ALUMINIUM ALLOY WEDGE; TECHNICAL SPECIFICATIONS |
DIN 8525-1:1977-11 | TESTING OF BRAZING JOINTS; GAP BRAZED JOINTS; TENSILE TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.