DIN 53505:2000-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2012
Superseded by
Language(s)
English
Published date
01-01-2000
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE 102039:1985 | Identical |
| ISO 7619:1997 | Identical |
| ISO 868:2003 | Identical |
| DIN 14307-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE C, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| BWB TL 4240-0057 : 1ED 2002 | SPECIAL FILTER, NBC PROTECTION, FLYING PERSONNEL |
| DIN VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN 46255:1982-11 | SCREWED GLANDS WITH STEEL CONDUIT THREAD, HEAVY DUTY CONSTRUCTION; DIMENSIONS, MOUNTING INSTRUCTIONS |
| DIN 14308-2:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE B, WITH SEALING RING FOR SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| BWB TL 4240-0017 : 1ED 2002 | SCREW FILTER, NON MAGNETIZABLE FOR NBC PROTECTIVE MASK |
| DIN 57291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| UNI CEN/TS 15901-8 : 2010 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
| BWB TL 8465-0029 : 8ED 2005 | BATON, WHITE AND BLACK |
| DIN 14322:1989-09 | Aluminium alloy suction coupling type B; nominal pressure 16 |
| DIN 14302:1985-04 | Aluminium alloy delivery coupling type C; nominal pressure 16 |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| DIN 13034:1985-12 | TROLLEY FOR STRETCHERS, HEIGHT-ADJUSTABLE |
| DIN 14330-2:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 32 |
| SAE MS1003/2_200401 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils – Specification - Addendum |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| DIN 4922-2:1981-04 | STEEL FILTER PIPES FOR DRILLED WELLS WITH SCREWED CONNECTION DN 100 TO DN 500 |
| DIN 53120-2:1979-08 | TESTING OF PAPER AND BOARD; DETERMINATION OF AIR PERMEABILITY; METHOD FOR MEDIUM RATES OF AIR PERMEABILITY ACCORDING TO SCHOPPER |
| DIN 14461-4:2008-02 | DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 4: FILLING VALVES PN 16 CONNECTED WITH FIREFIGTHING PIPES |
| DIN 20311:2002-11 | DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORINGS IN MINING |
| DIN 46320-1:1985-09 | SCREWED GLANDS FOR CABLES; GENERAL APPLICATION; DIMENSIONS, MOUNTING INSTRUCTIONS |
| DIN 16966-6:1982-07 | PIPE JOINTS AND THEIR ELEMENTS OF GLASS FIBRE REINFORCED POLYESTER RESINS; BUSHINGS, FLANGES, GASKETS, DIMENSIONS |
| DIN IEC 60544-2 : 1996 | GUIDE FOR DETERMINING THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
| DIN 14461-5:2008-02 | DELIVERY VALVE INSTALLATIONS FOR FIREFIGHTING PURPOSES - PART 5: TAP PN 16 CONNECTED WITH FIREFIGTHING PIPES |
| BWB TL 8430-0007 : 14ED 2004 | SPORTS SHOE, TERRAIN |
| VDE 0472-631 : 1987 | TESTING OF CABLES, INSULATED WIRES AND FLEXIBLE CORDS; SHORE D HANDNESS TEST |
| BWB TL 8415-0309 : 1ED 2006 | FINGERHANDSCHUH, CHEMIKALIENSCHUTZ FUER PROBENAHMEVORRICHTUNG TPZ-1 ABC |
| DIN 95366:1996-04 | ELASTOMER MOUNTS - POT BEARINGS AND FAIL SAFE POT BEARINGS, TYPES A TO G |
| DIN 73411:1979-07 | HOSES FOR COOLING PIPES IN MOTOR VEHICLES; REQUIREMENTS, DIMENSIONS, TESTS |
| BWB TL 4720-0022 : 2ED 2006 | |
| DIN 65221:1989-11 | Aerospace; sheets from rubber-cork; technical specification |
| DIN 53508:2000-03 | Accelerated ageing of rubber |
| DIN 16946-1:1989-03 | Cured casting resins; testing |
| DIN 14365-1:1991-02 | MULTI PURPOSE BRANCH PIPES FOR NOMINAL PRESSURE 16 - DIMENSIONS, MATERIALS, CONSTRUCTION, MARKING |
| BWB TL 7240-0028 : 1ED 1979 | CANISTER, 5 L, STEEL |
| DIN 73411-2:1996-10 | Cooling pipes in motor vehicles - Hoses and compounds - Part 2: Requirements, testing |
| SAE MS1004_201710 | Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| BWB TL 6650-0026 : 2ED 1994 | VISION BLOCK FOR ARMOURED ENGINEER TANK 2 |
| DIN 539-1:1998-04 | SCREWED SCALING PLUGS FOR SYPHONS OF DRAIN FITTINGS - PART 1: PLUGS OF COPPER-ZINC ALLOY |
| DIN 539-2:1998-04 | SCREWED SCALING PLUGS FOR SYPHONS OF DRAIN FITTINGS - PART 2: PLUGS OF POLYPROPYLEN (PP) |
| DIN 3535-1:1991-07 | SEALANTS FOR GAS SUPPLIES; ELASTOMERIC GASKET MATERIALS FOR GAS VALVES IN DOMESTIC INSTALLATIONS; REQUIREMENTS AND TESTS |
| DIN 3535-3:1986-04 | SEALS FOR GAS SUPPLY MATERIALS FOR SEALS OF RUBBER GAS SUPPLY MAINS AND PIPELINES, REQUIREMENTS AND TESTS OF MATERIALS |
| DIN 28052-4:1995-12 | CHEMICAL APPARATUS - SURFACE TREATMENT OF CONCRETE COMPONENTS IN PROCESS PLANTS USING NON-METALLIC MATERIALS - PART 4: COATING |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| DIN 14330:2012-05 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C NOMINAL PRESSURE PN 16 |
| DIN 65262-3:1996-11 | AEROSPACE SERIES - SEALING COMPOUNDS - PART 3: SILICONE-RUBBER BASE; TECHNICAL SPECIFICATION |
| DIN VDE 0472-631 : 1987 | TESTING OF CABLES, INSULATED WIRES AND FLEXIBLE CORDS; SHORE D HANDNESS TEST |
| BWB TL 6920-0104 : 1ED 1993 | TACTICAL TARGETS, FIRING TRAINING, RIFLE AND MACHINE GUN, PLASTIC |
| DIN 14319:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH METALLIC SEALING AREA AND WITH CAST IRON OR WITH ALUMINIUM ALLOY COVER, TYPE A - NOMINAL PRESSURE 16 |
| VDE 0291-1 : 1972 | SPECIFICATION FOR FILLING COMPOUNDS FOR CABLE ACCESSORIES AND FOR SCALDING COMPOUNDS - HOT CAST FILLING COMPOUNDS, FILLING COMPOUNDS FOR COLD PRESSING IN, TWO COMPONENT COLD CAST FILLING & SCALDING COMPOUNDS |
| DIN 14323:1985-04 | Aluminium alloy delivery and suction coupling type A; nominal pressure 16 |
| DIN 3485:1984-07 | VALVES FOR COMPRESSED AIR; GASKETS |
| DIN 4807-3:1993-10 | EXPANSION VESSELS, ELASTOMER MEMBRANES; REQUIREMENTS AND TESTING |
| DIN 14307-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN 46259:1982-11 | SEALINGS RINGS FOR GLANDS; HEAVY DUTY CONSTRUCTION; CABLE ENTRIES |
| DIN 14362-1:1986-12 | STRAINER |
| DIN 28062:1978-08 | CHEMICAL EQUIPMENT; BUILDING MATERIALS FOR BRICK LINING, CLASSIFICATION, PROPERTIES, TESTING |
| DIN 16850:1980-11 | FLOOR COVERING - HOMOGENE AND HETEROGENE ELASTOMERES FLOORING, REQUIREMENTS, TEST METHODS |
| DIN 53159:2010-08 | Paints and varnishes - Determination of the degree of chalking of paint coatings by the Kempf method |
| DIN 18122-1:1997-07 | SOIL, INVESTIGATION AND TESTING - CONSISTENCY LIMITS - PART 1: DETERMINATION OF LIQUID LIMIT AND PLASTIC LIMIT |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| SAE MS1001_201708 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| S.R. CEN TS 15901-8:2009 | ROAD AND AIRFIELD SURFACE CHARACTERISTICS - PART 8: PROCEDURE FOR DETERMINING THE SKID RESISTANCE OF A PAVEMENT SURFACE BY MEASUREMENT OF THE SIDEWAY-FORCE COEFFICIENT (SFCD): SKM |
| DIN EN 13748-1:2005-08 | TERRAZZO TILES - PART 1: TERRAZZO TILES FOR INTERNAL USE |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| DIN 11851:2013-02 | Stainless steel fittings for the food and chemical industry - Screw pipe connections for expanding and welding |
| DIN 53538-6:1993-08 | STANDARD REFERENCE ELASTOMERS - HYDROGENATED ACRYLONITRILE BUTADIENE RUBBER (HNBR), CROSS-LINKED BY PEROXIDE, FOR CHARACTERIZING SERVICE FLUIDS WITH RESPECT TO THEIR ACTION ON HNBR |
| BWB TL 9150-0019 : 6ED 1997 | HYDRAULIC FLUID, MINERAL OIL BASE, NATO CODE: H-573, BUNDESHEWR CODE: HY5040 |
| DIN 4807-1:1991-05 | EXPANSION VESSELS; TERMINOLOGY, RELEVANT LEGAL REGULATIONS; TESTING AND MARKING |
| DIN 4815-4:1987-04 | HOSES FOR LPG; HOSES AND HOSE ASSEMBLIES FOR FUEL GAS INSTALLATIONS IN VEHICLES |
| VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| BWB TL 2610-0002 : 8ED 2008 | RETREADING AND REPAIR OF BUNDESWEHR TIRES |
| BWB TL 8430-0011 : 2ED 2002 | |
| DIN 65262-2:1998-05 | AEROSPACE SERIES - SEALING COMPOUNDS - PART 2: VINYLIDENE FLUORIDE AND HEXAFLUOROPROPYLENE BASE; TECHNICAL SPECIFICATION |
| DIN 14318:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE B - NOMINAL PRESSURE 16 |
| DIN 14330-1:1985-04 | ALUMINIUM ALLOY DELIVERY COUPLING TYPE C - NOMINAL PRESSURE 16, USED FOR FIRE HOSES S 28 |
| DIN 14321:1985-04 | Aluminium alloy suction coupling type C; nominal pressure 16 |
| BWB TL 4940-0091 : 2ED 2007 | |
| DIN 477-4:1982-09 | COMPRESSED GAS CYLINDER VALVES; SWING CHECK VALVES FOR CAMPING-CYLINDERS |
| DIN 73379-2:1997-11 | FUEL HOSES - PART 2: REQUIREMENTS AND TESTS |
| BWB TL 9150-0025 : 4ED 1998 | STEAM TURBINE OIL, NATO CODE: O-250, BUNDESWEHR CODE: OY1150 |
| DIN 2828:1994-02 | CAM LOCKING COUPLINGS FOR HOSE ASSEMBLIES - NOMINAL PRESSURE 10 |
| DIN 14309:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE A WITH SEALING RING FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 14308-1:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE B WITH SEALING RING FOR PRESSURE PURPOSES - NOMINAL PRESSURE 16 |
| DIN 14306:1986-11 | ALUMINIUM ALLOY SOLID COUPLING TYPE D FOR PRESSURE AND SUCTION PURPOSES - NOMINAL PRESSURE 16 |
| DIN 65271:2002-07 | AEROSPACE SERIES - ELASTOMERIC SEMI-FINISHED PRODUCTS AND PARTS - TECHNICAL SPECIFICATION |
| DIN 477-6:1983-03 | GAS CYLINDER VALVES - TEST PRESSURES 300 BAR AND 450 BAR, WITH CYLINDRICAL THREAD FOR VALVE STEM AND GAS CYLINDER NECK FOR BREATHING APPARATUS - SIZES, THREADS |
| DIN 4815-3:1985-07 | FLEXIBLE TUBES FOR LPG; FLEXIBLE TUBES FOR FILLING AND EMPTYING OF TRANSPORTATION VEHICLES |
| SAE MS1006_201803 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| SAE MS1003_201803 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
| DIN 1048-5:1991-06 | TESTING CONCRETE - TESTING OF HARDENED CONCRETE (SPECIMENS PREPARED IN MOULD) |
| BWB TL 9150-0058 : 6ED 2002 | LUBRICATING OIL, REFRIGERANT COMPRESSOR NATO CODE: O-283 BUNDESWEHR CODE: OY1165 |
| DIN 14303:2013-02 | Aluminium alloy delivery coupling type B with nominal pressure PN 16 |
| BWB TL 2530-0039 : 6ED 2008 | REPAIR OF ROAD WHEEL FOR MTW M113 AND PZH M109 |
| BWB TL 4940-0097 : 1ED 2007 | |
| BWB TL 7240-0022 : 5ED 2003 | MILITARY CAN, 20 LITRE (STEEL CANISTER) |
| DIN 14301:1985-04 | Aluminium alloy delivery and suction coupling type D; nominal pressure |
| DIN 42562-2:1987-04 | TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - COMPONENTS |
| DIN 14317:1985-04 | ALUMINIUM ALLOY SOLID COUPLING TYPE C WITH METALLIC SEALING AREA AND WITH CAST IRON COVER OR WITH ALUMINIUM ALLOY COVER, TYPE C - NOMINAL PRESSURE 16 |
| 00/705406 DC : 0 | PREN 13831 - CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER SYSTEMS |
| SAE MS1002_201710 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| DIN 95363:1994-07 | ELASTOMER MOUNTS; STUD MOUNTS; TYPES A TO F |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| DIN 42552:2009-08 | TRANSFORMERS - OIL LEVEL INDICATOR WITH SCREWPLUG |
| DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
| CEN/TS 15901-8:2009 | Road and airfield surface characteristics - Part 8: Procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD): SKM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.