• Shopping Cart
    There are no items in your cart

DIN 57606-1 : 1984

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

CONNECTING MATERIAL UP TO 660 V; INSTALLATION BOXES FOR ACCOMMODATION OF EQUIPMENT AND/OR CONNECTING TERMINALS

Superseded date

01-10-2000

Superseded by

DIN VDE 0606-1 : 2000

Published date

12-01-2013

Sorry this product is not available in your region.

1 Anwendungsbereich
2 Begriffe
3 Anforderungen
  3.1 Allgemeine Anforderungen
  3.2 Schutz gegen direktes Berühren
  3.3 Schutzarten
  3.4 Aufschriften
  3.5 Grösse von Verbindungsdosen
  3.6 Anforderungen nach Art der Installations-technik
       entsprechend Tabelle 1
  3.7 Anforderungen nach Art der Installationsdosen
       entsprechend Tabelle 1
4 Prüfungen
  4.1 Allgemeines über Prüfungen
  4.2 Prüfung der Isolierteile auf Wärmesicherheit
  4.3 Prüfung der Isolierteile auf Wärmebeständigkeit
  4.4 Prüfung der Isolierteile auf Feuerbeständigkeit
  4.5 Prüfung des Rostschutzes
  4.6 Prüfung der Isolierung
  4.7 Prüfung des Schutzes gegen direktes Berühren
  4.8 Prüfung der Schutzart
  4.9 Prüfung der Aufschriften
  4.10 Prüfung von Klemmstellen von Schraubklemmen
  4.11 Prüfung der mechanischen Sicherheit gegen
       Lage- und Formveränderung
  4.12 Prüfung der mechanischen Haltbarkeit von
       Installationsdosen und Deckeln
  4.13 Prüfung der Befestigung von Deckeln
  4.14 Prüfung der Befestigung von Geräten
  4.15 Prüfung von Betonbaudosen
  4.16 Prüfung der Grösse des Verbindungsteiles bei
       Geräte-Verbindungsdosen
  4.17 Prüfung der Zugentlastung an Hohlwand-dosen und
       Installationskanaldosen
  4.18 Prüfung der Zugentlastung an Geräteanschlussdosen
  4.19 Prüfung der Zugentlastung an Verbindungs-muffen
Zitierte Normen und andere Unterlagen
Weitere Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen

DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

Standards Relationship
VDE 0606-1 : 2014 Corresponds

VDE 0606-2 : 84 DRAFT AMD 2 CONNECTING MATERIAL UP TO 660 V - CONNECTING TERMINALS UP TO 70 MM SQUARED FOR CONNECTION IN BOXES
DIN 49073-2 : 1958 INSTALLATION MATERIAL; FLUSH BOXES FOR SPREAD FASTENING OF THE INSET MAIN DIMENSION
VDE 0304-1 : 1959 TESTING OF SOLID INSULATING MATERIALS FOR ASSESSMENT OF THEIR THERMAL STABILITY - DETERMINATION OF THERMAL PROPERTIES OF SOLID INSULATING MATERIALS
DIN 40052:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF SOLID FOREIGN BODIES, DUST CHAMBER
VDE 0603 : DRAFT AMD 1 89 SMALL DISTRIBUTION BOARDS AND METER PANELS UP TO 250 V TO EARTH
VDE 0100-523 : 1981 ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - DIMENSIONING OF CABLES AND CORDS; MECHANICAL STRENGTH, VOLTAGE DROP AND CURRENT-CARRYING CAPACITY
VDE 0250-204 : 2000
DIN 40011:1989-08 ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT
VDE 0606-1 : 2014 DOSEN UND GEHAEUSE FUER INSTALLATIONSGERAETE FUER HAUSHALT UND AEHNLICHE ORTSFESTE ELEKTRISCHE INSTALLATIONEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN (IEC 60670-1:2002 + CORRIGENDUM 2003 + A1:2011)
DIN 46206-1:1985-06 TERMINALS FOR ELECTRICAL EQUIPMENT; FLAT BLADE TERMINALS FOR THE CONNECTION OF ROUND COPPER CONDUCTORS UP TO 70 MM[2]
DIN 57107 : 1981 AMD 1 1982 ERRICHTEN UND PRFEN VON ELEKTRISCHEN ANLAGEN IN MEDIZINISCH GENUTZTEN RAEUMEN
DIN 46285:1972-11 ONE TO THREE-POLE SOCKET TERMINAL STRIPS (LIGHTING FIXTURE TERMINALS) 380 V A.C. AND 440 V D.C. FOR CONDUCTORS UP TO 2.5 MM[2]
DIN 46207:1971-06 CONNECTIONS FOR ELECTRICAL DEVICES - SLEEVE TERMINALS AND SIDE OPENING SLEEVE TERMINALS - PRINCIPAL DIMENSIONS AND CORRELATION
VDE 0607 : 1974 VDE SPECIFICATIONS FOR CLAMP SITES OF SCREWLESS TERMINALS FOR CONNECTING OR JOINING COPPER CONDUCTORS OF 0.5 MM[2] TO 16 MM[2]
DIN 40014 : 1985 PROTECTIVE INSULATION; GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT; PLATES
VDE 0604-1 : 2014-05 Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements;
DIN 40050:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER
DIN 49200:1987-12 SWITCHES UP TO 16 A 250 V FOR FLUSH AND SURFACE MOUNTING
VDE 0341-200 : DRAFT 81 SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - METHODS OF TEST
DIN 53480 : 1976 VDE-BESTIMMUNG FUER ELEKTRISCHE PRUEFUNGEN VON ISOLIERSTOFFEN; KRIECHSTROMFESTIGKEIT
DIN 57470-1 : 1984 TESTING EQUIPMENT AND TESTING METHODS; TESTING OF PROTECTION AGAINST CONTACT; IEC TESTING FINGER
DIN 40053-4:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, JET NOZZLE
DIN 57609-2 : 1983 SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2]
VDE 0605 : 1982 CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS
VDE 0632 : DRAFT AMD 4 88 SCHALTER FUER HAUSHALT UND AEHNLICHE ORTSFESTE ELEKTRISCHE INSTALLATIONEN
DIN 57100-200 : 1982 ERRICHTEN VON STARKSTROMANLAGEN MIT NENNSPANNUNGEN BIS 1000 V; ALLGEMEIN GLTIGE BEGRIFFE
VDE 0609-1 : 2000 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2]
VDE 0303-1 : 1984 METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
VDE 0282-804 : 1992 RUBBER CABLES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - ORDINARY TOUGH RUBBER-SHEATHED FLEXIBLE CABLES 05RR
VDE 0620 : 1992 PLUGS AND SOCKET-OUTLETS UP TO 400 V, 25 A
DIN 57250-204 : 1983 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC-SHEATHED CABLE
DIN 46320-2:1973-01 ADAPTERS FOR SCREWED GLANDS FOR GENERAL APPLICATION
VDE 0470 : 1961 RULES FOR TESTING EQUIPMENT AND TESTING METHODS
DIN 30600:1985-11 GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION
DIN 57605 : 1982 CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS
VDE 0107 : 1994 ELECTRICAL INSTALLATIONS IN HOSPITALS AND LOCATIONS FOR MEDICAL USE OUTSIDE HOSPITALS
DIN 57609-1 : 1983 SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS
VDE 0220-1 : 1971 SPECIFICATION FOR DETACHABLE CABLE CLAMPS TO BE USED IN POWER CABLE INSTALLATIONS UP TO 1000 V
DIN 46320-1:1985-09 SCREWED GLANDS FOR CABLES; GENERAL APPLICATION; DIMENSIONS, MOUNTING INSTRUCTIONS
DIN 46320-3:1973-01 FLAT NUTS FOR SCREWED GLANDS WITH STEEL CONDUIT THREAD
DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
VDE 0308 : 1929 RECOMMENDATION FOR PRODUCING STANDARD AIR HUMIDITY OR TESTING ELECTRICAL INSULATING MATERIALS
DIN 46274:1973-11 SLEEVE TERMINALS B
VDE 0100-200 : 2006-06 Low-voltage installations – Part 200: Definitions (IEC 60050-826:2004, modified)
DIN 46284:1972-11 TWO- AND THREE-POLE SOCKET TERMINAL STRIPS (APPLIANCE TERMINALS) 380 V A.C. AND 440 V D.C. FOR CONDUCTORS UP TO 2.5 MM[2]
VDE 0282-810 : 1992 RUBBER CABLES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - RUBBER SHEATHED FLEXIBLE CABLES 07RN
DIN 57604 : 1977 VDE SPECIFICATION FOR DUCTS AND ACCESSORIES OF PLASTIC MATERIAL FOR ELECTRICAL INSTALLATIONS
VDE 0110 : 1972 SPECIFICATION FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT
VDE 0170-1 : 2014 EXPLOSIONSGEFAEHRDETE BEREICHE - TEIL 0: BETRIEBSMITTEL - ALLGEMEINE ANFORDERUNGEN (IEC 60079-0:2011, MODIFIZIERT +COR.:2012+COR.:2013)
VDE 0471-2-1 : 84 DRAFT 92 FIRE HAZARD TESTING; TEST METHODS; GLOW WIRE TEST AND GUIDANCE
VDE 0611-1 : 2010 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
DIN 49075 : 1952 INSTALLATION MATERIAL; COVERING PLATE AND INSET FOR SWITCHES AND ELECTRIC SOCKETS, MAIN DIMENSIONS
VDE 0108 : 1979 ERECTION AND OPERATION OF POWER INSTALLATIONS IN COMMUNAL FACILITIES AND EMERGENCY LIGHTING FOR WORKING AND BUSINESS PREMISES
DIN 40053-1:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS
DIN 40053-2:1980-07 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, OSCILLATING TUBE
VDE 0609-2 : 1983 SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2]
VDE 0100 : 1973 REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V
VDE 0341-100 : DRAFT 81 SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - DEFINITIONS & GENERAL REQUIREMENTS
DIN 46320-4:1973-01 LOCK FOR SCREWED GLANDS
DIN 46289-1:1984-01 TERMINALS FOR ELECTRICAL PURPOSES; CLASSIFICATION, DEFINITIONS, TECHNICAL TERMS
VDE 0604-2 : 1986 TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - PART 2: TRUNKING FOR APPLIANCES

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.