DIN 57635 : 1984
Current
The latest, up-to-date edition.
LOW VOLTAGE FUSES; D-FUSES E 16 UP TO 25 A, 500 V; D-FUSES UP TO 100 A, 750 V; D-FUSES UP TO 100 A, 500 V
Hardcopy
German
01-02-1984
1 Anwendungsbereich
2 Begriffe
3 Allgemeine Anforderungen
4 Allgemeines über Prüfungen
5 Charakteristische Merkmale
6 Kennzeichnung
7 Anforderungen
8 Berührungsschutz
9 Leiteranschlüsse
10 Sicherungssockel
11 Sicherungseinsätze
12 Weitere Bauteile
13 Isolationswiderstand und Spannungsfestigkeit
14 Erwärmung
15 Schmelzzeiten und Funktion des Anzeigers
16 Ausschaltvermögen
17 Wärmebeständigkeit und Feuersicherheit
18 Mechanische Festigkeit der Sicherungseinsätze
19 Kriech- und Luftstrecken, Abstände
20 Schrauben, Verbindungen und stromführende Teile
21 Widerstandsfähigkeit gegen Korrosion (Rost)
Diese Norm wird angewendet für Niederspannungssicherungen: - D-Sicherungen E 16 für Nennströme bis 25 A und Nennspannung bis 500 V für Mess- und Steuereinrichtungen - D-Sicherungen für Nennströme bis 100 A und Nennspannung bis 750 V für elektrische Bahnen - D-Sicherungseinsätze für Nennströme bis 100 A und Nennspannung bis 500 V für den Bergbau.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Verband Deutscher Elektrotechniker
|
Status |
Current
|
Standards | Relationship |
VDE 0635 : 1984 | Identical |
DIN 57636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
DIN VDE 0636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
DIN 40401-1:1981-12 | GAUGES FOR EDISON THREAD FOR D-TYPE FUSES 'GO' RING GAUGES |
DIN 40100-3:1985-07 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; CURRENT, VOLTAGE, FREQUENCY, CONDUCTORS, METHODS OF EARTHING |
DIN 49360-1:1988-07 | D-TYPE FUSES; E 16 FUSE-CARRIER, 25 A 500 V |
DIN 49336 : 1980 | D-TYPE FUSE BASES E 16, 25, A, 500 V FOR BACK CONNECTION, WITH FLANGE, FOR GAUGE RINGS |
DIN 40401-2:1981-12 | 'GO' AND 'NOT GO' PLUG GAUGES FOR D TYPE FUSES; GAUGES FOR EDISON THREAD |
DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
DIN 49343:1976-01 | TIME-LAG SYMBOL FOR D-TYPE FUSE-LINKS |
VDE 0110B : 1979 | SPECIFICATIONS FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT; AMENDMENT TO VDE 0110/11.72 |
DIN 49325:1980-04 | D-TYPE FUSE-BASES E 16 25 A 500 V FOR FRONT CONNECTION WITH COVER, FOR FLUSH MOUNTING, FOR GAUGE RINGS |
DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
DIN 57470-1 : 1984 | TESTING EQUIPMENT AND TESTING METHODS; TESTING OF PROTECTION AGAINST CONTACT; IEC TESTING FINGER |
DIN 57609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
DIN 49329:1985-04 | D-TYPE FUSE BASES FOR FRONT CONNECTION; D 4 100 A 750 V |
VDE 0609-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
DIN 40010:1990-08 | ELECTRICAL ENGINEERING; VDE TEST MARKS; MARKING ON ELECTRICAL EQUIPMENT |
DIN 49518:1979-01 | GAUGES C17, FOR CONCENTRICITY OF FUSE BASES |
VDE 0470 : 1961 | RULES FOR TESTING EQUIPMENT AND TESTING METHODS |
DIN 49515:1983-12 | D-TYPE FUSE LINKS D 2, D 3, D 4 H, 500 V |
DIN 57609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS |
VDE 0636-31 : 2015 | Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) – Examples of standardized systems of fuses A to F – National Supplement 1: Rated voltage = AC 690 V and rated voltage = DC 600 V |
DIN 49367:1982-06 | D-TYPE FUSES, FUSE LINKS D 111, 660 V ~, 600 V - AND 750 V |
DIN 49368:1982-06 | D TYPE FUSE LINKS D 1V H 750V |
DIN 49328:1985-04 | D-type fuse-bases for front connection, for push-in gauge rings, D III 63 A 750 V |
DIN 49360-2:1986-08 | D TYPE FUSES; E 16 500 V FUSE-LINKS |
DIN 49360-3:1986-08 | D-TYPE FUSES; E 16 GAUGE RINGS WITH FUNCTIONAL DIMENSIONS FOR ADAPTER SCREW FITTERS |
VDE 0609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
VDE 0636-1 : 2015 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006 + A1:2009 + A2:2014) |
DIN 49335:1985-04 | D-type fuse-bases for front connection, for screw in gauge rings, D III 63 A 750 V |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.