DIN 57636-41 : 1983
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C.
01-01-1998
12-01-2013
1 Anwendungsbereich
2 Begriffe
2.1 Schraubkappe
2.2 Passeinsatz
3 Betriebsbedingungen
4 Klassifikation
5 Charakteristische Merkmale
5.1 Spannungen
5.2 Ströme
5.3 Kennlinien
5.4 Selektivität
5.5 Kennlinienbeständigkeit
5.6 Erwärmung und Verlustleistung
5.7 Ausschaltvermögen
6 Anforderungen
6.1 Allgemeines
6.2 Unverwechselbarkeit
6.3 Berührungsschutz
6.4 Kriech- und Luftstrecken, Abstände
6.5 Leiteranschlüsse
6.6 Sicherungssockel, Schraubkappen und Passeinsätze
6.7 Sicherungseinsätze
6.8 Kontaktstücke
6.9 Werkstoffe
6.10 Isolierteile
6.11 Kennzeichnung
7 Prüfungen
7.1 Allgemeines
7.2 Masse, Unverwechselbarkeit, Kennzeichnung,
Kriech- und Luftstrecken, Abstände
7.3 Berührungsschutz
7.4 Spannungsfestigkeit und Isolationswiderstand
7.5 Verlustleistung
7.6 Zeit/Strom-Verhalten
7.7 Kennlinienbeständigkeit
7.8 Wärmefestigkeit und Feuersicherheit
7.9 Widerstandsfähigkeit gegen Korrosion (Rost)
7.10 Mechanische Festigkeit, Montierbarkeit, Aufbau
7.11 Ausschaltvermögen und Schaltspannung
7.12 Selektivität
7.13 Funktion des Anzeigers
7.14 Widerstandsfähigkeit gegen Spannungsrisskorrosion
Bilder
Zitierte Normen und andere Unterlagen
Erläuterungen
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
VDE 0636-41 : 1983 | Corresponds |
DIN VDE 0636-41 : 1983 | Corresponds |
VDE 0636-41 : 1983 | Identical |
VDE 0638:1981 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
DIN VDE 0638 : 1981 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
DIN 57638:1981-09 | LOW-VOLTAGE SWITCH-GEARS; FUSE-SWITCH-UNITS; D0-SYSTEM |
DIN 57636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
VDE 0636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN VDE 0636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
DIN VDE 0636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES - H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN 40401-1:1981-12 | GAUGES FOR EDISON THREAD FOR D-TYPE FUSES 'GO' RING GAUGES |
DIN 40100-3:1985-07 | GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; CURRENT, VOLTAGE, FREQUENCY, CONDUCTORS, METHODS OF EARTHING |
DIN 49524:1980-06 | D-TYPE FUSE-BASE FOR FRONT CONNECTION D 01, D 02, D 03, 380 V |
DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
DIN 46282:1973-11 | CLAMPING SADDLE FOR CONDUCTORS |
VDE 0636-23 : 1984 | LOW-VOLTAGE FUSES - LV HRC FUSES FOR PROTECTION OF SEMICONDUCTORS UP TO 1600 A & UP TO 3000 V |
DIN 40401-2:1981-12 | 'GO' AND 'NOT GO' PLUG GAUGES FOR D TYPE FUSES; GAUGES FOR EDISON THREAD |
DIN 2250-1:2008-10 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GO RING GAUGES AND SETTING RING GAUGES - PART 1: FROM 1 MM UP TO 315 MM NOMINAL DIAMETER |
DIN 49525-2:1979-03 | D-TYPE, FUSE-CARRIERS D 01, D 02, D 03, 380 V; GAUGES |
DIN 49525-1:1980-03 | D-TYPE FUSE CARRIERS D 01, D 02, D 03, 380 V |
DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
DIN 57470-1 : 1984 | TESTING EQUIPMENT AND TESTING METHODS; TESTING OF PROTECTION AGAINST CONTACT; IEC TESTING FINGER |
DIN 57636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN EN 50022:1978-05 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS, TOP HAT RAILS, 35 MM WIDE, FOR SNAP ON MOUNTING OF EQUIPMENT |
VDE 0609-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
DIN 57636-23 : 1984 | NIEDERSPANNUNGSSICHERUNGEN; NH-SYSTEM, HALBLEITERSCHUTZSICHERUNGEN BIS 1600 A UND BIS 3000 V |
VDE 0636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
DIN 40010:1990-08 | ELECTRICAL ENGINEERING; VDE TEST MARKS; MARKING ON ELECTRICAL EQUIPMENT |
DIN 46223:1973-02 | ROUND-TERMINALS |
DIN 57609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS |
VDE 0636-31 : 2015 | Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) – Examples of standardized systems of fuses A to F – National Supplement 1: Rated voltage = AC 690 V and rated voltage = DC 600 V |
DIN 49300:1979-03 | D-TYPE FUSES; SYNOPSIS |
DIN 50018:2013-05 | Testing in a saturated atmosphere in the presence of sulfur dioxide |
DIN 49523:1981-06 | GAUGE-PIECES D 01, D 02, D 03 AND FUNCTIONAL MEASURES FOR GAUGE-PIECE HAND KEYS |
DIN 41000:1975-02 | FLAT TERMINALS - ASSEMBLY, TERMINAL BODY |
DIN 57471-2 : 1975 | VDE SPECIFICATIONS FOR FIRE RISK TESTING OF ELECTROTECHNICAL PRODUCTS, THEIR SUBASSEMBLIES AND COMPONENTS - GLOW-WIRE TEST |
DIN 46288:1974-08 | CONNECTING WASHERS FOR CONDUCTORS |
DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
DIN 49522:1981-04 | D-TYPE FUSE-LINKS - D 01, D 02, D 03, 380 V, 250 V- |
VDE 0636-1 : 2015 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006 + A1:2009 + A2:2014) |
VDE 0636-21 : 2015 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - NATIONAL SUPPLEMENT 1: PROTECTION OF SPECIAL ELECTRICAL SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.