DIN 8077:2008-09
Current
Current
The latest, up-to-date edition.
POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Sicherheitsfaktoren
5 Masse und Bezeichnung
5.1 Allgemeines
5.2 Aussendurchmesser, Wanddicken, S/SDR-Reihen
und Gewichte
5.3 Grenzabmasse der mittleren Aussendurchmesser
und der Ovalitäten
5.4 Grenzabmasse der Wanddicken
6 Zulässige Betriebsüberdrücke
6.1 Zulässige Betriebsüberdrücke für das
Durchflussmedium Wasser
6.2 Zulässige Betriebsüberdrücke für andere
Durchflussmedien
7 Lieferart
8 Kennzeichnung
Anhang A (informativ) - Erläuterungen
Anhang B (informativ) - Literaturhinweise
Bilder
Tabellen
This standard is included in DIN Handbook 52.
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN 16962-3:1980-08 | PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE PIPELINES, TYPES 1 AND 2; BENDS FORMED FROM PIPE FOR BUTT-WELDING DIMENSIONS |
| DIN 16962-8:1980-08 | PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE PIPELINES - TYPES 1 AND 2 - INJECTION MOULDED SOCKETS AND CAPS FOR SOCKET-WELDING DIMENSIONS |
| DIN HDBK 52 : 7ED 2014 | ROHRE, ROHRLEITUNGSTEILE UND ROHRVERBINDUNGEN AUS THERMOPLASTISCHEN KUNSTSTOFFEN |
| DIN 3442-3:1987-07 | VALVES OF POLYPROPYLENE (PP) - DIAPHRAGM VALVES - DIMENSIONS |
| DIN 16962-10:1989-10 | PIPE JOINT ASSEMBLIES AND FITTINGS FOR TYPE 1, TYPE 2 AND 3, POLYPROPYLENE (PP) PRESSURE PIPELINES - INJECTION MOULDED FITTINGS FOR BUTT WELDING - DIMENSIONS |
| DIN 3442-1:1987-05 | VALVES OF POLYPROPYLEN (PP) - REQUIREMENTS AND TESTS |
| DIN 4741-2:1987-08 | VENTILATION PLANT - TYPE 1 POLYPROPYLENE (PP) UPTAKES - PIPE FITTINGS, BENDS - MINIMUM WALL THICKNESSES |
| DIN EN ISO 13477:2008-06 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| DIN 3442-2:1980-10 | VALVES OF PP (POLYPROPYLEN) BALL VALVES, DIMENSIONS |
| DIN 8078:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING |
| DIN EN ISO 13479:2010-01 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| DIN 4728:1993-09 | PIPELINES OF POLYPROPYLENE TYPE 2 AND TYPE 3 USED IN WARM WATER FLOOR HEATING SYSTEMS; SPECIAL REQUIREMENTS AND TESTING |
| DIN 16962-11:1980-08 | PIPE JOINTS AND THEIR ELEMENTS FOR PIPES OF POLYPROPYLENE (PP) UNDER PRESSURE, TYPE 1 AND 2; TURNED AND PRESSED SOCKETS REDUCING FOR BUTT WELDING, DIMENSIONS |
| DIN 4741-1:1984-08 | VENTILATION PLANTS - POLYPROPYLENE (PP) PIPES - CALCULATION OF THE MINIMUM WALL THICKNESS |
| DIN 16962-13:1987-06 | PIPE JOINT AND FITTINGS OF POLYPROPYLENE (PP) PRESSURE PIPES - TYPE 1 AND TYPE 2, THREADED PIPE JOINTS - DIMENSIONS |
| NSF 14 : 2016 | PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS |
| DIN 16962-1:1980-08 | PIPE JOINTS AND ELEMENTS FOR POLYPROPYLENE (PP) PRESSURE PIPELINES, TYPES 1 AND 2; BENDS OF SEGMENTAL CONSTRUCTION FOR BUTT-WELDING, DIMENSIONS |
| DIN 8078:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - GENERAL QUALITY REQUIREMENTS AND TESTING |
| DIN ISO/TS 15874-7:2004-03 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 1852-1:2016-05 (Draft) | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| DIN EN ISO 15874-5:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM (ISO 15874-5:2013) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| DIN EN ISO 15874-1:2013-06 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013); German and English version EN ISO 15874-1:2013 |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| DIN 8078 Beiblatt 1:1982-02 | PIPES OF POLYPROPYLENE (PP) - CHEMICAL RESISTANCE OF PIPES AND FITTINGS |
| DIN EN 1451-1:2016-03 (Draft) | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 15874-3:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS (ISO 15874-3:2013) |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| DIN EN ISO 12162:2010-04 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| DIN EN ISO 15874-2:2013-06 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 2: PIPES (ISO 15874-2:2013) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.