ISO 16135:2006
|
Industrial valves Ball valves of thermoplastics materials |
ISO/TR 10358:1993
|
Plastics pipes and fittings Combined chemical-resistance classification table |
DIN EN ISO 179-2:2012-06
|
PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2: INSTRUMENTED IMPACT TEST (ISO 179-2:1997 + AMD.1:2011) |
DIN EN ISO 13477:2008-06
|
THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
DIN EN ISO 1167-1:2006-05
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
DIN EN ISO 16138:2006-06
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 9080:2013-02
|
PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
ISO 3213:2009
|
Polypropylene (PP) pipes Effect of time and temperature on the expected strength |
DIN EN ISO 1167-2:2006-05
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces |
ISO 265-1:1988
|
Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
ISO 1133-1:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
ISO 10146:1997
|
Crosslinked polyethylene (PE-X) pipes Effect of time and temperature on the expected strength |
ISO 4427-1:2007
|
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General |
ISO 6964:1986
|
Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
DIN EN ISO 10147:2013-03
|
PIPES AND FITTINGS MADE OF CROSSLINKED POLYETHYLENE (PE-X) - ESTIMATION OF THE DEGREE OF CROSSLINKING BY DETERMINATION OF THE GEL CONTENT (ISO 10147:2011) |
ISO 14531-1:2002
|
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies |
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
ISO 13477:2008
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test) |
ISO 3:1973
|
Preferred numbers Series of preferred numbers |
ISO 4433-1:1997
|
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method |
ISO 4437-2:2014
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes |
DIN EN ISO 1043-1:2016-09
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
ISO 18553:2002
|
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
DIN EN ISO 1183-1:2013-04
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
ISO 12230:2012
|
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength |
CEN/TR 15438:2007
|
Plastics piping systems - Guidance for coding of products and their intended uses |
DIN EN ISO 16137:2006-06
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
ISO 12162:2009
|
Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
ISO 15853:1999
|
Thermoplastics materials Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
ISO 13478:2007
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST) |
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions |
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
DIN EN ISO 15512:2016-06 (Draft)
|
PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
HD 60364-1:2008/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS |
ISO 16871:2003
|
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering |
ISO 472:2013
|
Plastics Vocabulary |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
ISO 4433-2:1997
|
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes |
ISO 1167-3:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components |
ISO 24033:2009
|
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength |
DIN EN ISO 16871:2003-12
|
PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
ISO 17885:2015
|
Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
ISO 16138:2006
|
Industrial valves Diaphragm valves of thermoplastics materials |
DIN EN ISO 16135:2006-06
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
ISO 16137:2006
|
Industrial valves Check valves of thermoplastics materials |
ISO 15512:2016
|
Plastics Determination of water content |
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
ISO 4065:1996
|
Thermoplastics pipes Universal wall thickness table |
ISO 16136:2006
|
Industrial valves Butterfly valves of thermoplastics materials |
ISO 497:1973
|
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
DIN EN ISO 11357-6:2013-04
|
PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008) |
DIN EN ISO 16139:2006-06
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 16136:2006-06
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 1167-3:2008-02
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007) |
ISO 16139:2006
|
Industrial valves Gate valves of thermoplastics materials |
ISO 13760:1998
|
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage |
ISO 10147:2011
|
Pipes and fittings made of crosslinked polyethylene (PE-X) Estimation of the degree of crosslinking by determination of the gel content |
DIN EN ISO 472:2013-06
|
PLASTICS - VOCABULARY (ISO 472:2013) |
DIN EN ISO 12162:2010-04
|
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
ISO 760:1978
|
Determination of water Karl Fischer method (General method) |
ISO 21787:2006
|
Industrial valves Globe valves of thermoplastics materials |
DIN EN ISO 21787:2006-06
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
DIN EN ISO 1133-1:2012-03
|
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
EN 12099:1997
|
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
DIN EN ISO 1167-4:2008-02
|
THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
EN 712:1993
|
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force |
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method |
ISO 2505:2005
|
Thermoplastics pipes — Longitudinal reversion — Test method and parameters |