DIN 8556-1:1986-05
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FILLER METALS FOR WELDING STAINLESS AND HEAT RESISTANT STEELS; DESIGNATION, TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
01-01-2000
English
12-01-2013
1 Anwendungsbereich
2 Einteilung
2.1 Stabelektroden zum Lichtbogenhandschweissen
2.2 Schweissstäbe, Schweissdrähte, Drahtelektroden
zum Schutzgasschweissen (WIG- and MSG-Verfahren)
2.3 Band- and Drahtelektroden zum Unterpulverschweissen
2.4 Hilfsstoffe
3 Bezeichnung
3.1 Kennbuchstaben für das Schweissverfahren
3.2 Kurzname für die chemische Zusammensetzung des
Schweissgutes von Stabelektroden
3.3 Typ-Kurzzeichen für die Umhüllung der
Stabelektroden
3.4 Kurzname für die chemische Zusammensetzung der Band- und
Drahtelektroden, Schweissdrähte and Schweissstäbe zum
Schutzgasschweissen and Unterpulverschweissen
3.5 Kennziffern für die Schweisspositionen sowie
Kennziffern and Kennzeichen für die Stromeignung
der Stabelektroden
3.6 Kennzahlen für das Ausbringen
3.7 Bezeichnungsbeispiele
4 Mechanische Gütewerte
5 Technische Lieferbedingungen
5.1 Masse and Bezeichnung
5.2 Bestellbeispiele
5.3 Beschaffenheit
5.4 Ausbringen
5.5 Chemische Zusammensetzung
5.6 Kennzeichnung
5.7 Lieferart
5.8 Verpackung
5.9 Abnahmeprüfungen
6 Lagerung and Rücktrocknung
Covers filler metals (except cored electrodes) for welding stainless and heat resisting steels and steel castings.
DevelopmentNote |
Supersedes DIN 8556 (07/2002)
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Supersedes |
Standards | Relationship |
ISO 3580:2017 | Similar to |
ISO 544:2011 | Similar to |
DIN 8571:1981-07 | WELDING FILLER MATERIALS AND AUXILIARY MATERIALS FOR METAL-WELDING - DEFINITIONS, CLASSIFICATION |
DIN 32522:1981-04 | FLUXES OF SUBMERGED ARC WELDING - DESIGNATION - TECHNICAL DELIVERY CONDITIONS |
DIN EN 22553:1997-03 | WELDED, BRAZED AND SOLDERED JOINTS - SYMBOLIC REPRESENTATION ON DRAWINGS |
DIN 1913-1:1984-06 | COVERED ELECTRODES FOR THE JOINT WELDING OF UNALLOYED AND LOW ALLOY STEEL - CLASSIFICATION, DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 17445:1984-11 | STAINLESS STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
SEW 470 : 1976 | HEAT RESISTING ROLLED AND FORGED STEELS |
ISO 547:1975 | Electrodes for the welding of mild steel and low alloy high tensile steel Lengths and tolerance |
DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
SEW 595 : 1976 | STEEL CASTINGS FOR PETROLEUM AND NATURAL GAS PLANTS |
ISO 544:2011 | Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
DIN 17445:1984-11 | STAINLESS STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 32525-2:1979-08 | TESTING FILLER METALS BY MEANS OF WELD METAL SPECIMENS - TEST PIECES FOR DETERMINING CHEMICAL COMPOSITION WITH LOW HEAT INPUT |
DIN 32526:1978-08 | SHIELDING GASES FOR WELDING |
DIN 8559-1:1984-07 | WELDING FILLER METALS FOR GAS-SHIELDED WELDING; WIRE ELECTRODES FILLER RODS AND SOLID WIRES FOR GAS-SHIELDED WELDING OF UNALLOYED AND ALLOYED STEELS |
DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 32525-1:1981-12 | TESTING FILLER METALS BY MEANS OF WELD METAL SPECIMENS - ARC WELDED TEST PIECES, SPECIMENS FOR MECHANICAL-TECHNOLOGICAL TESTS |
SEW 471 : 1976 | HEAT RESISTING STEEL CASTINGS |
DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
DIN 17465:1993-08 | HEAT RESISTING STEEL CASTINGS - TECHNICAL DELIVERY CONDITIONS |
SEW 410 : 1998 | STAINLESS STEEL CASTINGS; QUALITY SPECIFICATIONS |
ISO 546:1975 | Drawn or extruded filler rods for welding, supplied in straight lengths Lengths and tolerance |
DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
DIN 32523:1984-04 | DETERMINATION OF THE ELECTRODE EFFICIENCY WHEN WELDING WITH COVERED ELECTRODES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.