DIN 867:1986-02
Current
Current
The latest, up-to-date edition.
BASIC RACK FOR INVOLUTE TEETH OF CYLINDRICAL GEARS FOR GENERAL ENGINEERING AND HEAVY ENGINEERING
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-02-1986
€41.78
Excluding VAT
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN 8000:1962-10 | Design Dimensions and Errors of Hobs for Involute Spur Gears; Fundamental Terms |
| DIN 3995-6:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, CHORD OF THE PITCH CIRCLE BETWEEN THE FLANKS OF A TOOTH AND CHORDAL HEIGHT |
| DIN 1826:1977-11 | Pinion-type cutters for cylindrical gears; extended hub gear cutters for spur gears |
| DIN 3960:1987-03 | DEFINITIONS, PARAMETERS AND EQUATIONS FOR INVOLUTE CYLINDRICAL GEARS AND GEAR PAIRS |
| DIN 3990-3:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; CALCULATION OF TOOTH STRENGTH |
| DIN 3990-21:1989-02 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; APPLICATION STANDARD FOR HIGH SPEED GEARS AND GEARS OF SIMILAR REQUIREMENT |
| 04/30112626 DC : DRAFT APR 2004 | ISO 21771 - GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - CONCEPTS AND GEOMETRY |
| DIN 1825:1977-11 | Pinion-type cutters for cylindrical gears; disc-gear cutters for spur gears |
| DIN HDBK 173 : 4ED 2008 | |
| DIN ISO 21771:2014-08 | Gears - Cylindrical involute gears and gear pairs - Concepts and geometry (ISO 21771:2007) |
| DIN 3995-7:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, CONTACT RATIO |
| DIN 21772:2012-07 | GEARS - CYLINDRICAL INVOLUTE GEARS AND GEAR PAIRS - DEFINITION OF DEVIATIONS |
| DIN 3994:1963-08 | ADDENDUM MODIFICATION OF STRAIGHT SPUR GEARS IN THE 05 SYSTEM - INTRODUCTION |
| DIN 58411:1987-11 | HOBS FOR CYLINDRICAL FINE PITCH GEARS WITH MODULE 0.1 UP TO 1 MM |
| DIN 1829-1:1977-11 | PINION-TYPE CUTTERS FOR CYLINDRICAL GEARS; DESIGN, DIMENSIONS, DEFINITIONS, MARKING |
| DIN HDBK 123 : 5ED 2007 | |
| DIN HDBK 1 E : 5ED 2014 | MECHANICAL ENGINEERING - BASIC STANDARDS 1 |
| VDI 2736 Blatt 2:2014-06 | Thermoplastic gear wheels - Cylindrical gears - Calculation of the load-carrying capacity |
| VDI 2736 Blatt 3:2014-05 | Thermoplastic gear wheels - Crossed helical gears - Mating cylindrical worm with helical gear - Calculation of the load-carrying capacity |
| DIN 3970:2010-04 | Master gears for checking cylindrical gears - Gear blanks and gearing |
| DIN HDBK 1 : 25ED 2014 | |
| BS ISO 21771:2007 | Gears. Cylindrical involute gears and gear pairs. Concepts and geometry |
| DIN 3990-2:1987-12 | CALCULATION OF LOAD CAPACITY CYLINDRICAL GEARS; CALCULATION OF PITTING RESISTANCE |
| DIN HDBK 106 : 6ED 2015 | |
| ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
| DIN 3990-41:1990-05 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; APPLICATION STANDARD FOR VEHICLE GEARS |
| DIN 3993-1:1981-08 | GEOMETRICAL DESIGN OF CYLINDRICAL INTERNAL INVOLUTE GEAR PAIRS - BASIC RULES |
| DIN 3995-3:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, TIP DIAMETER |
| DIN 3990-11:1989-02 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; APPLICATION STANDARD FOR INDUSTRIAL GEARS; DETAILED METHOD |
| DIN 3995-2:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, ROOT DIAMETER |
| DIN 1829-2:1977-11 | Pinion-type cutters for cylindrical gears; tolerances |
| DIN 3995-5:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, GAUGE DISTANCE OVER BALLS FOR DETERMINATION OF TOOTH THICKNESS |
| DIN 3995-4:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, BASE TANGENT LENGTH |
| DIN 3990-5:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; ENDURANCE LIMITS AND MATERIAL QUALITIES |
| DIN 3990-1:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| DIN 1828:1977-11 | Pinion-type cutters for cylindrical gears; shank-gear cutters for spur gears |
| DIN 3995-8:1963-08 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, SLIDING SPEED AT TOOTH TIP |
| DIN 3995-1:1967-05 | STRAIGHT EXTERNAL SPUR GEARS IN THE 05 SYSTEM, CENTRE DISTANCES AND PRESSURE ANGLES ON THE PITCH CIRCLE |
| DIN 3977:1981-02 | MEASURING ELEMENT DIAMETERS FOR THE RADIAL OR DIAMETRAL DIMENSION FOR TESTING TOOTH THICKNESS OF CYLINDRICAL GEARS |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.