DIN EN 10217-1:2005-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
Hardcopy , PDF
03-08-2019
English
01-01-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Einteilung und Bezeichnung
5.1 Einteilung
5.2 Bezeichnung
6 Bestellangaben
6.1 Verbindliche Angaben
6.2 Optionen
6.3 Bestellbeispiel
7 Herstellverfahren
7.1 Stahlherstellungsverfahren
7.2 Desoxidationsverfahren
7.3 Rohrherstellung und Lieferzustand
8 Anforderungen
8.1 Allgemeines
8.2 Chemische Zusammensetzung
8.3 Mechanische Eigenschaften
8.4 Oberflächenbeschaffenheit und innere Beschaffenheit
8.5 Geradheit
8.6 Endenvorbereitung
8.7 Masse und Grenzabmasse
9 Prüfung
9.1 Arten der Prüfung
9.2 Prüfbescheinigungen
9.3 Zusammenfassung der Prüfungen
10 Probenahme
10.1 Prüfumfang
10.2 Vorbereitung der Probenabschnitte und Proben
11 Prüfverfahren
11.1 Chemische Analyse
11.2 Zugversuch am Grundwerkstoff
11.3 Zugversuch quer zur Schweissnaht
11.4 Ringfaltversuch
11.5 Aufweitversuch
11.6 Schweissnaht-Biegeversuch
11.7 Kerbschlagbiegeversuch
11.8 Dichtheitsprüfung
11.9 Masskontrolle
11.10 Sichtprüfung
11.11 Zerstörungsfreie Prüfung
11.12 Wiederholungsprüfungen, Sortieren und Nachbehandlung
12 Kennzeichnung
12.1 Verbindliche Kennzeichnung
12.2 Zusätzliche Kennzeichnung
13 Oberflächenschutz
Anhang A (normativ) Qualifizierung des Schweissverfahrens
für die Herstellung von SAW-Rohren
Anhang ZA (informativ) Abschnitte in dieser Europäischen
Norm, die grundlegende Anforderungen oder andere
Vorgaben von EU-Richtlinien betreffen
Literaturhinweise
This standard is included in DIN Handbook 15, 15-2, 403/1 and 403. Defines the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties.
| DevelopmentNote |
Supersedes DIN 1626-1, DIN 1626-3 and DIN 1626-4 (03/2003) Together with DIN EN 10296-1, DIN EN 10208-1, DIN EN 10224, DIN EN 10216-1 and DIN EN 10297-1, supersedes DIN 1626. Together with DIN EN 10296-1 and DIN EN 10224, supersedes DIN 1628. (02/2004) Together with DIN EN 10216-1, DIN EN 10208-1, DIN EN 10297-1 and DIN EN 10224, supersedes DIN 1629. (02/2004) DRAFT 2014 issued in October 2014. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| NF EN 10217-1 : 2002 AMD 1 2005 | Identical |
| NS EN 10217-1 : 2002 AMD 1 2005 | Identical |
| I.S. EN 10217-1:2002 | Identical |
| NBN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| ONORM EN 10217-1 : 2007 | Identical |
| BS EN 10217-1:2002 | Identical |
| UNI EN 10217-1 : 2005 | Identical |
| NEN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| EN 10217-1:2019 | Identical |
| SN EN 10217-1 : 2002 AMD 1 2005 | Identical |
| PREN 10217-1 : DRAFT 2009 | Identical |
| DIN 2559-3:2007-09 | PREPARATION OF WELDS - PART 3: MATCHING OF INSIDE DIAMETERS FOR CIRCUMFERENTIAL WELDS ON WELDED PIPES |
| DIN HDBK 15-2 : 12ED 2014 | STAHLROHRLEITUNGEN - BAND 2: ROHRE - TECHNISCHE LIEFERBEDINGUNGEN |
| DIN HDBK 15 : 10ED 2005 | STEEL PIPELINES 1 - STANDARDS ON DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| DIN 2876:2002-06 | FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS GLASS LINED - TECHNICAL SPECIFICATIONS |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| DIN HDBK 403 : 4ED 2005 | IRON AND STEEL: QUALITY STANDARDS 3 - PRESSURE VESSELS AND PIPELINES - FINE GRAIN STEEL - STEEL WITH LOW TEMPERATURE TOUGHNESS - STEEL WITH ELEVATED TEMPERATURE PROPERTIES - STEEL FOR PRESSURE APPLICATIONS - CASTINGS AND FORGINGS |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| DIN HDBK 403/1 : 6ED 2015 | IRON AND STEEL - QUALITY STANDARDS 3/1 - SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE APPLICATIONS |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| DIN 28081-1:2015-06 | SUPPORTS FOR VESSELS - PART 1: TUBULAR SUPPORTS FOR VESSELS |
| DIN 19643-1:2012-11 | Treatment of water of swimming pools and baths - Part 1: General requirements |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| DIN 30681:2013-12 | COMPENSATORS FOR GAS-INSTALLATIONS - EXPANSION JOINTS WITH STAINLESS STEEL BELLOWS UNIT - SAFETY REQUIREMENTS, TESTING, MARKING |
| DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10234 : 1993 | METALLIC MATERIALS - TUBE - DRIFT EXPANDING TEST |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN 10246-7:2005 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10246-10:2000 | Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10233 : 1993 | METALLIC MATERIALS - TUBE - FLATTENING TEST |
| EN 760:1996 | Welding consumables - Fluxes for submerged arc welding - Classification |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ENV 10220 : 1993 | SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
| EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.