DIN EN 10217-4:2005-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
Hardcopy , PDF
02-08-2019
English
01-01-2005
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole
5 Einteilung und Bezeichnung
5.1 Einteilung
5.2 Bezeichnung
6 Bestellangaben
6.1 Verbindliche Angaben
6.2 Optionen
6.3 Bestellbeispiel
7 Herstellverfahren
7.1 Stahlherstellungsverfahren
7.2 Desoxidationsverfahren
7.3 Rohrherstellung und Lieferzustand
8 Anforderungen
8.1 Allgemeines
8.2 Chemische Zusammensetzung
8.3 Mechanische Eigenschaften
8.4 Oberflächenbeschaffenheit und innere Beschaffenheit
8.5 Geradheit
8.6 Endenvorbereitung
8.7 Masse, längenbezogene Masse und Grenzabmasse
9 Prüfung
9.1 Arten der Prüfung
9.2 Prüfbescheinigungen
9.3 Zusammenfassung der Prüfungen
10 Probenahme
10.1 Prüfumfang
10.2 Vorbereitung der Probenabschnitte und Proben
11 Prüfverfahren
11.1 Chemische Analyse
11.2 Zugversuch am Grundwerkstoff
11.3 Zugversuch quer zur Schweissnaht
11.4 Ringfaltversuch
11.5 Ringzugversuch
11.6 Aufweitversuch
11.7 Ringaufdornversuch
11.8 Kerbschlagbiegeversuch
11.9 Dichtheitsprüfung
11.10 Masskontrolle
11.11 Sichtprüfung
11.12 Zerstörungsfreie Prüfung
11.13 Wiederholungsprüfungen, Sortieren und Nachbehandlung
12 Kennzeichnung
12.1 Verbindliche Kennzeichnung
12.2 Zusätzliche Kennzeichnung
13 Oberflächenschutz
Anhang ZA (informativ) Abschnitte in dieser Europäischen
Norm, die grundlegende Anforderungen oder
andere Vorgaben von EU-Richtlinien betreffen
Literaturhinweise
This standard is included in DIN Handbook 15, 15-2, 403/1 and 403. Defines the technical delivery conditions in two test categories of electric welded tubes of circular cross section, with specified low temperature properties, made of non-alloy steel.
DevelopmentNote |
Supersedes DIN 17174 (08/2002) DRAFT 2014 issued in October 2014. (10/2014)
|
DocumentType |
Standard
|
Pages |
29
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Standards | Relationship |
BS EN 10217-4:2002 | Identical |
I.S. EN 10217-4:2002 | Identical |
NBN EN 10217-4 : 2002 AMD 1 2005 | Identical |
NEN EN 10217-4 : 2002 AMD 1 2005 | Identical |
ONORM EN 10217-4 : 2007 | Identical |
SN EN 10217-4 : 2002 AMD 1 2005 | Identical |
UNE-EN 10217-4:2003 | Identical |
NS EN 10217-4 : 2002 AMD 1 2005 | Identical |
UNI EN 10217-4 : 2005 | Identical |
EN 10217-4:2019 | Identical |
NF EN 10217-4 : 2002 AMD 1 2005 | Identical |
DIN 28181:2007-09 | WELDED STEEL TUBES FOR TUBULAR HEAT EXCHANGERS - DIMENSIONS AND MATERIALS |
DIN HDBK 15-2 : 12ED 2014 | STAHLROHRLEITUNGEN - BAND 2: ROHRE - TECHNISCHE LIEFERBEDINGUNGEN |
DIN HDBK 15 : 10ED 2005 | STEEL PIPELINES 1 - STANDARDS ON DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
DIN 28179:2007-09 | STEEL U-TUBES FOR TUBULAR HEAT EXCHANGERS - TECHNICAL DELIVERY CONDITIONS |
DIN HDBK 403 : 4ED 2005 | IRON AND STEEL: QUALITY STANDARDS 3 - PRESSURE VESSELS AND PIPELINES - FINE GRAIN STEEL - STEEL WITH LOW TEMPERATURE TOUGHNESS - STEEL WITH ELEVATED TEMPERATURE PROPERTIES - STEEL FOR PRESSURE APPLICATIONS - CASTINGS AND FORGINGS |
DIN HDBK 403/1 : 6ED 2015 | IRON AND STEEL - QUALITY STANDARDS 3/1 - SEAMLESS AND WELDED STEEL TUBES FOR PRESSURE APPLICATIONS |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
EN 10246-1:1996 | Non destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness |
CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
EN 10234 : 1993 | METALLIC MATERIALS - TUBE - DRIFT EXPANDING TEST |
EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
EN 10237 : 1993 | METALLIC MATERIALS - TUBE - RING TENSILE TEST |
EN 10246-6:1999 | Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections |
EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN 10236 : 1993 | METALLIC MATERIALS - TUBE - RING EXPANDING TEST |
EN 10246-7:2005 | Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN 10233 : 1993 | METALLIC MATERIALS - TUBE - FLATTENING TEST |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
ENV 10220 : 1993 | SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
EN 10020:2000 | Definition and classification of grades of steel |
EN 10246-14:1999 | Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections |
ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.