DIN EN 10305-5:2016-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
Available format(s)
Hardcopy , PDF
Superseded date
01-02-2024
Superseded by
Language(s)
English, German
Published date
01-08-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Classification and designation
6 Information to be supplied by the purchaser
7 Manufacturing process
8 Requirements
9 Inspection
10 Sampling
11 Test methods
12 Marking
13 Protection and packaging
Bibliography
This standard is included in DIN Handbook 404/2.
| DevelopmentNote |
Supersedes DIN 2395-1 & DIN 2395-2. (08/2003)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 10305-5:2016 | Identical |
| NBN EN 10305-5 : 2016 | Identical |
| NEN EN 10305-5 : 2016 | Identical |
| NF EN 10305-5 : 2016 | Identical |
| EN 10305-5:2016 | Identical |
| SN EN 10305-5:2016 | Identical |
| I.S. EN 10305-5:2016 | Identical |
| NS EN 10305-5 : 2016 | Identical |
| UNI EN 10305-5 : 2010 | Identical |
| BS EN 10305-5:2010 | Identical |
| BWB TL 4210-0125 : 1ED 2004 | |
| BWB TL 7195-0014 : 5ED 2007 | WORK TABLE, COLLAPSIBLE |
| DIN HDBK 404 : 5ED 2009 | STAHL UND EISEN: GUETENORMEN 4 - MASCHINENBAU, WERKZEUGBAU - STAHLAUSWAHL. MASCHINENBAUSTAHL FUER ALLGEMEINE VERWENDUNG. MASCHINENBAUSTAHL FUER BESONDERE VERARBEITUNG ODER VERWENDUNG. PRAEZISIONSSTAHLROHRE. WERKZEUGSTAEHLE. STAHLGUSS |
| DIN HDBK 404/2 : 2ED 2017 | STAHL UND EISEN: GUETENORMEN 4/2 - MASCHINENBAU/WERKZEUGBAU - ROHRE FUER DEN MASCHINENBAU, WERKZEUGSTAHL UND STAHLGUSS |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 9712:2012 | Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| EN ISO 14713-2:2009 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.