DIN EN 13813:2003-01
Current
The latest, up-to-date edition.
SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS
Hardcopy , PDF
English, German
01-01-2003
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Materials
5 Classification and requirements
5.1 General
5.2 Properties and classification
5.2.1 Compressive strength
5.2.2 Flexural strength
5.2.3 Wear resistance
5.2.4 Surface hardness
5.2.5 Resistance to indentation
5.2.6 Resistance to rolling wheel for screed material
intended to be covered with floor covering
5.2.7 Setting time
5.2.8 Shrinkage and swelling
5.2.9 Consistency
5.2.10 pH-value
5.2.11 Modulus of elasticity in flexure
5.2.12 Bond strength
5.2.13 Impact resistance
5.3 Special characteristics
5.3.1 General
5.3.2 Electrical resistance
5.3.3 Chemical resistance
5.3.4 Reaction to fire
5.3.5 Release of corrosive substances or corrosiveness
of screed materials
5.3.6 Water vapour permeability
5.3.7 Thermal resistance
5.3.8 Water permeability
5.3.9 Impact sound insulation
5.3.10 Sound absorption
5.3.11 Other characteristics
6 Evaluation of conformity
6.1 General requirements
6.2 Initial type tests
6.3 Factory Production Control (FPC)
6.3.1 General
6.3.2 Process control
6.3.3 Screed material
6.3.4 Traceability
6.3.5 Labelling
6.3.6 Records
7 Designation
8 Marking, labeling and packaging
9 Conformity criteria and assessment procedure
9.1 General requirements
9.2 Conformity criteria for physical, mechanical and
chemical properties and evaluation procedure
9.2.1 General
9.2.2 Statistical conformity criteria
9.2.3 Assessment based on individual results
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements
or other provisions of EU Directives
ZA.1 - Scope and relevant characteristics
ZA.2 - Procedures for the attestation of conformity of floor
screed material
ZA.2.1 - System(s) of attestation of conformity
ZA.2.2 - EC Certificate and Declaration of conformity
ZA.3 - CE conformity marking
Bibliography
Gives requirements for screed material for use in floor construction internally.
| DevelopmentNote |
Supersedes DIN 18560-1 E:1992, DIN 18560-2 E:1992, DIN 18560-3 E:1992, DIN 18560-4 E:1992 and DIN 18560-7 E:1992 (04/2004)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 13813:2002 | Identical |
| SN EN 13813 : 2002 | Identical |
| NS EN 13813 : 2002 + NA 2011 | Identical |
| NEN EN 13813 : 2002 | Identical |
| I.S. EN 13813:2002 | Identical |
| NBN EN 13813 : 2002 | Identical |
| NF EN 13813 : 2003 | Identical |
| UNI EN 13813 : 2004 | Identical |
| BS EN 13813:2002 | Identical |
| UNE-EN 13813:2003 | Identical |
| DIN 18560-2:1992-05 | FLOOR SCREEDS IN BUILDING CONSTRUCTION - PART 2: FLOOR SCREEDS AND HEATING FLOOR SCREEDS ON INSULATION LAYERS |
| DIN 18560-4:1992-05 | FLOOR SCREEDS IN BUILDING CONSTRUCTION - PART 4: SCREEDS ON A SEPARATING LAYER |
| DIN 18560-1:1992-05 | FLOOR SCREEDS IN BUILDING CONSTRUCTION - PART 1: GENERAL REQUIREMENTS, TESTING AND CONSTRUCTION |
| DIN 18560-4:2004-04 | FLOOR SCREEDS IN BUILDING CONSTRUCTION - PART 4: SCREEDS ON A SEPARATING LAYER |
| EN ISO 6272 : 1994 | PAINTS AND VARNISHES - FALLING-WEIGHT TEST |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| PREN 13454-2 : DRAFT 2017 | BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN 12706:1999 | Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13318:2000 | Screed material and floor screeds - Definitions |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| PREN 13892-3 : DRAFT 2014 | METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.