DIN EN 16566 E : 2014
|
PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
BS EN 50085-2-2:2008
|
Cable trunking systems and cable ducting systems for electrical installations Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
DIN EN 16566:2014-08
|
PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTION OF FILLERS TO EUROPEAN STANDARDS |
PREN 13454-2 : DRAFT 2017
|
BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
DIN EN 14879-1 E : 2005
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
UNE-EN 13892-3:2016
|
Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
BS EN 13892-4:2002
|
Methods of test for screed materials Determination of wear resistance-BCA |
DIN EN 14879-1:2005-12
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
BS EN 13892-1:2002
|
Methods of test for screed materials Sampling, making and curing specimens for test |
BS EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
EN 50085-2-2:2008
|
Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
DIN EN 13892-7:2003-09
|
METHODS OF TEST FOR SCREED MATERIALS - PART 7: DETERMINATION OF WEAR RESISTANCE TO ROLLING WHEEL OF SCREED MATERIAL WITH FLOOR COVERINGS |
DIN EN 13892-3:2015-03
|
METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
ONORM EN 13454-2 : 2007
|
BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
CEI EN 50085-2-2 : 2010
|
CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING UNDERFLOOR, FLUSHFLOOR, OR ONFLOOR |
I.S. EN 50085-2-2:2008
|
CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS INTENDED FOR MOUNTING UNDERFLOOR, FLUSHFLOOR, OR ONFLOOR |
BS EN 16566:2014
|
Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards |
PREN 13454-1 : DRAFT 2017
|
BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
I.S. EN 13454-2:2004
|
BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
PREN 13892-9 : DRAFT 2017
|
METHODS OF TEST FOR SCREED MATERIALS - PART 9: DETERMINATION OF SHRINKAGE AND SWELLING |
DIN EN 14879-5 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
DIN EN 14016-2:2004-04
|
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods; German version EN 14016-2:2004 |
I.S. EN 13892-3:2014
|
METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
DIN EN 14016-1:2004-04
|
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements; German version EN 14016-1:2004 |
14/30297859 DC : DRAFT AUG 2014
|
BS EN 13892-3 - METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
UNI EN 16566 : 2014
|
PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
I.S. EN 16893:2018
|
CONSERVATION OF CULTURAL HERITAGE - SPECIFICATIONS FOR LOCATION, CONSTRUCTION AND MODIFICATION OF BUILDINGS OR ROOMS INTENDED FOR THE STORAGE OR USE OF HERITAGE COLLECTIONS |
I.S. EN 16566:2014
|
PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
04/30109196 DC : DRAFT FEB 2004
|
EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
I.S. EN 13892-8:2002
|
METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
17/30357424 DC : 0
|
BS EN 13454-2 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS |
DIN EN 14879-3 E : 2007
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
DIN EN 13454-1:2005-01
|
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements; German version EN 13454-1:2004 |
BS EN 14016-1:2004
|
Binders for magnesite screeds. Caustic magnesia and magnesium chloride Definitions, requirements |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
EN 13454-2:2003+A1:2007
|
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods |
EN 13892-5:2003
|
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer |
EN 13892-3:2014
|
Methods of test for screed materials - Part 3: Determination of wear resistance - Böhme |
13/30276214 DC : 0
|
BS EN 16566 - PAINTS AND VARNISHES - FILLERS FOR INTERNAL AND/OR EXTERNAL WORKS - ADAPTATION OF FILLERS TO EUROPEAN STANDARDS |
17/30351971 DC : 0
|
BS EN 13892-9 - METHODS OF TEST FOR SCREED MATERIALS - PART 9: DETERMINATION OF SHRINKAGE AND SWELLING |
DIN EN 13454-2:2007-11
|
BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
17/30357436 DC : 0
|
BS EN 13454-1 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 1: DEFINITIONS AND REQUIREMENTS |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 14879-1:2005
|
0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
BS EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
BS EN 13892-3:2014
|
Methods of test for screed materials Determination of wear resistance. Böhme |
BS EN 13892-7:2003
|
Methods of test for screed materials Determination of wear resistance to rolling wheel of screed material with floor coverings |
BS EN 13454-1:2004
|
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate Definitions and requirements |
BS EN 13892-6:2002
|
Methods of test for screed materials Determination of surface hardness |
EN 13892-4:2002
|
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA |
EN 13892-6:2002
|
Methods of test for screed materials - Part 6: Determination of surface hardness |
EN 14879-3:2006
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
EN 14879-5:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
EN 13892-7:2003
|
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings |
EN 14016-2 : 2004
|
BINDERS FOR MAGNESITE SCREEDS - CAUSTIC MAGNESIA AND MAGNESIUM CHLORIDE - PART 2: TEST METHODS |
EN 13892-1:2002
|
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test |
EN 16566:2014
|
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 13892-8:2002
|
Methods of test for screed materials - Part 8: Determination of bond strength |
EN 14016-1:2004
|
Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements |
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
EN 13892-2 : 2002
|
METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
BS EN 13892-8:2002
|
Methods of test for screed materials Determination of bond strength |
UNE-EN 16566:2014
|
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards |
PREN 13892-3 : DRAFT 2014
|
METHODS OF TEST FOR SCREED MATERIALS - PART 3: DETERMINATION OF WEAR RESISTANCE - BOHME |
04/30123574 DC : DRAFT OCT 2004
|
EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
BS EN 13454-2:2003
|
Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate Test methods |
EN 16893:2018
|
Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections |
BS EN 14016-2:2004
|
Binders for magnesite screeds. Caustic magnesia and magnesium chloride Test methods |
BS EN 13892-2:2002
|
Methods of test for screed materials Determination of flexural and compressive strength |
BS EN 13892-5:2003
|
Methods of test for screed materials Determination of wear resistance to rolling wheel of screed material for wearing layer |
EN 13454-1:2004
|
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements |
DIN EN 13892-2:2003-02
|
METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
DIN EN 13892-6:2003-02
|
Methods of test for screed materials - Part 6: Determination of surface hardness |
DIN EN 14879-3:2007-02
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
DIN EN 13892-8:2003-02
|
METHODS OF TEST FOR SCREED MATERIALS - PART 8: DETERMINATION OF BOND STRENGTH |
DIN EN 13892-5:2003-09
|
METHODS OF TEST FOR SCREED MATERIALS - PART 5: DETERMINATION OF WEAR RESISTANCE TO ROLLING WHEEL OF SCREED MATERIAL FOR WEARING LAYER |
DIN EN 14879-5:2007-10
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
DIN EN 13892-1:2003-02
|
METHODS OF TEST FOR SCREED MATERIALS - PART 1: SAMPLING - MAKING AND CURING SPECIMENS FOR TESTING |
DIN EN 13892-4:2003-02
|
METHODS OF TEST FOR SCREED MATERIALS - PART 4: DETERMINATION OF WEAR RESISTANCE - BCA |