DIN EN 14035-13:2004-11

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
  4.1 Means of ignition
  4.2 Attachment of initial fuse (if any)
  4.3 Protection of flash pellet
  4.4 Net explosive content
5 Performance
  5.1 Initial fuse (if any)
  5.2 Ignition of flash pellet without protruding fuse or
      ignition head
  5.3 Principal effect
  5.4 Explosions
  5.5 Functioning
  5.6 Burning matter
6 Primary pack
7 Minimum labelling requirements
  7.1 General
  7.2 Type name and category
  7.3 Safety information
      7.3.1 General
      7.3.2 Category 1 flash pellets
      7.3.3 Category 2 flash pellets
  7.4 Name, address and telephone number of manufacturer
      or distributor or importer
  7.5 Reference to this standard
  7.6 Printing
      7.6.1 Labelling
      7.6.2 Type size
  7.7 Additional information on the primary pack
8 Test methods
  8.1 Attachment of protruding fuse (type test and batch
      test)
      8.1.1 Apparatus
      8.1.2 Procedure
  8.2 Attachment of ignition head, if applicable (type
      test)
      8.2.1 Apparatus
      8.2.2 Procedure
  8.3 Performance (type test and batch test)
      8.3.1 Test environment
      8.3.2 Apparatus
      8.3.3 Procedure
  8.4 Determination of net explosive content (type test)
      8.4.1 Apparatus
      8.4.2 Procedure
  8.5 Labelling (type test and batch test)
Annex A (normative) Type testing
  A.1 General
  A.2 Number of flash pellets to be tested
  A.3 Loose pyrotechnic composition
  A.4 Thermal conditioning
  A.5 Mechanical conditioning
      A.5.1 Apparatus
      A.5.2 Procedure
  A.6 Number of primary packs to be examined
  A.7 Test report
Annex B (normative) Batch testing
  B.1 General
  B.2 Sampling plans
  B.3 Unit of product
  B.4 Nonconformits
  B.5 Test report
  B.6 Acceptance or rejection of a batch
      B.6.1 General
      B.6.2 Nonconforming units
      B.6.3 Critical nonconforming units
      B.6.4 Major nonconforming units
      B.6.5 Minor nonconforming units
Annex C (informative) A-Deviations

Covers requirements for the construction, performance, primary packaging and labelling of flash pellets and the corresponding test methods.