Skip to content
Please enter a keyword to search

  • DIN EN 14197-2:2006-11

    Current The latest, up-to-date edition.

    CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING

    Available format(s):  Hardcopy, PDF

    Language(s): 

    Published date:  01-11-2006

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions and symbols
      3.1 Terms and definitions
      3.2 Symbols
    4 Design
      4.1 Design options
      4.2 Common design requirements
      4.3 Design by calculation
    5 Fabrication
      5.1 General
      5.2 Cutting
      5.3 Cold forming
      5.4 Hot forming
      5.5 Manufacturing tolerances
      5.6 Welding
      5.7 Non-welded permanent joints
    6 Inspection and testing
      6.1 Quality plan
      6.2 Production control test plates
      6.3 Non-destructive testing
      6.4 Reactification
      6.5 Pressure testing
    Figures
    Annex A (normative) - Elastic stress analysis
          A.1 General
          A.2 Terminology
          A.3 Limit for longitudinal compressive general
              membrane stress
          A.4 Stress categories and stress limits for general
              application
          A.5 Specific criteria, stress categories and stress
              limits for limited application
    Annex B (normative) - Additional Requirements for 9% Ni steel
          B.1 Introduction
          B.2 Specific requirements
    Annex C (Informative) - Pressure strengthening of vessels
                            from austenitic stainless steels
          C.1 Introduction
          C.2 Field of application
          C.3 Definitions and units of measurement
          C.4 Materials
          C.5 Design
          C.6 Manufacturing and inspection
          C.7 Comments
    Annex D (informative) - Pressure limiting systems
    Annex E (informative) - Specific weld details
          E.1 Field of application
          E.2 Specific weld detail
          E.3 Oxygen service requirements
    Annex F (normative) - Additional requirements for flammable fluids
    Annex G (informative) - Increased material property for austenitic
                             stainless steel
    Annex H (normative) - Base materials
    Annex I (informative) - Other materials
    Annex ZA (informative) - Clauses of this European Standard addressing
                             essential requirements or other provisions
                             of EU Directives

    Abstract - (Show below) - (Hide below)

    Gives requirements for the design, fabrication, inspection and testing of static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. Applicable to static non-vacuum insulated cryogenic vessels for fluids.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 268
    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 14197-1:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
    EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C
    EN ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
    EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
    EN 288-1:1992/A1:1997 SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
    EN 288-3:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS
    EN 288-4:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS
    EN 1252-1:1998/AC:1998 CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C
    EN 895:1995 Destructive tests on welds in metallic materials - Transverse tensile test
    EN 13133:2000 Brazing - Brazer approval
    EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
    EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
    EN 1797:2001 Cryogenic vessels - Gas/material compatibility
    EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
    EN 288-2:1992/A1:1997 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
    EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
    EN 13445-4 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
    EN 12300 : 1998 AMD 1 2006 CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE
    EN 287-2:1992/A1:1997 APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
    ISO 1106-1:1984 Recommended practice for radiographic examination of fusion welded joints — Part 1: Fusion welded butt joints in steel plates up to 50 mm thick
    EN 875:1995 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
    EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
    EN 13134:2000 Brazing - Procedure approval
    EN 288-8 : 1995 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 8: APPROVAL BY A PRE-PRODUCTION WELDING TEST
    EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
    EN 10028-4:2017 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
    EN 970:1997 Non-destructive examination of fusion welds - Visual examination
    EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
    EN 13648-3:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing
    EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective