ISO 3171:1988
|
Petroleum liquids — Automatic pipeline sampling |
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method |
EN 14104:2003
|
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ACID VALUE |
DIN 51750-2:1990-12
|
SAMPLING OF LIQUID PETROLEUM PRODUCTS |
DIN SPEC 51603-6:2016-08 (Draft)
|
LIQUID FUELS - FUEL OILS - PART 6: FUEL OIL EL A, MINIMUM REQUIREMENTS |
ISO 13759:1996
|
Petroleum products — Determination of alkyl nitrate in diesel fuels — Spectrometric method |
ISO 12937:2000
|
Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 3170:2004
|
Petroleum liquids — Manual sampling |
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
ISO 3987:2010
|
Petroleum products — Determination of sulfated ash in lubricating oils and additives |
EN 15779:2009+A1:2013
|
Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
ISO 5165:1998
|
Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
EN 116:2015
|
Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
EN 14103:2011
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of ester and linolenic acid methyl ester contents |
EN ISO 12185:1996
|
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
EN 16300:2012
|
Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data |
EN 14112:2016
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
PREN 15751 : DRAFT 2012
|
AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
EN 16294:2012
|
Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
ISO 2160:1998
|
Petroleum products Corrosiveness to copper Copper strip test |
CEN/TR 15160:2005
|
Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN 16091:2011
|
Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
DIN 51750-1:1990-12
|
SAMPLING OF PETROLEUM PRODUCTS; GENERAL INFORMATION |
EN ISO 13032:2012
|
Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
EN 14106:2003
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free glycerol content |
EN 14331:2004
|
Liquid petroleum products - Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates - Liquid chromatography (LC)/gas chromatography (GC) method |
PREN 12662 : DRAFT 2012
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
EN 14105:2011
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
CEN/TR 15367-1:2014
|
PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
EN 14108:2003
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of sodium content by atomic absorption spectrometry |
ISO 20884:2011
|
Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
EN 14107:2003
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry |
EN 16329:2013
|
Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
EN 14538:2006
|
Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
ISO 4259:2006
|
Petroleum products Determination and application of precision data in relation to methods of test |
EN ISO 12937:2000
|
Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
EN 23015:1994
|
Petroleum products - Determination of cloud point (ISO 3015:1992) |
EN 14109:2003
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of potassium content by atomic absorption spectrometry |
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
EN ISO 13759:1996
|
Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996) |
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
ISO 20846:2011
|
Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
EN ISO 20884:2011
|
Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
EN ISO 2160:1998
|
Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
EN 14111:2003
|
Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of iodine value |
EN ISO 20846:2011
|
Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
ISO 13032:2012
|
Petroleum products Determination of low concentration of sulfur in automotive fuels Energy-dispersive X-ray fluorescence spectrometric method |
EN ISO 3170:2004
|
Petroleum liquids - Manual sampling (ISO 3170:2004) |
EN ISO 3171:1999
|
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
EN 14110:2003
|
FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
ISO 3015:1992
|
Petroleum products — Determination of cloud point |
EN ISO 4259:2006
|
Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |