Skip to content
Please enter a keyword to search

  • DIN EN 14394:2008-12

    Current The latest, up-to-date edition.

    HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2008

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Vorwort
    1 Anwendungsbereich
    2 Normative Verweisungen
    3 Begriffe
    4 Anforderungen
    5 Werkstoffe
    6 Bemessung
    7 Prüfungen
    8 Heizungstechnische Anforderungen
    9 Technische Unterlagen, Lieferumfang
    Anhang A (normativ) - Zylinderschalen unter innerem Überdruck
    Anhang B (normativ) - Kugelschalen und gewölbte Böden unter
                          innerem und äusserem Überdruck
    Anhang C (normativ) - Gewölbte Flammrohrböden
    Anhang D (normativ) - Ebene Wandungen, Verankerungen und
                          Versteifungsträger
    Anhang E (normativ) - Zylinderförmige Schalen unter äusserem
                          Überdruck
    Anhang F (informativ) - Druckgeräterichtlinie 97/23/EG
    Anhang ZA (informativ) - Zusammenhang zwischen dieser
                             Europäischen Norm und den
                             grundlegenden Anforderungen der
                             EG-Richtlinie 92/42/EWG vom 21.
                             Mai 1992 über die Wirkungsgrade
                             von mit flüssigen oder gasförmigen
                             Brennstoffen beschickten neuen
                             Warmwasserheizkesseln
    Anhang ZB (informativ) - Zusammenhang zwischen dieser
                             Europäischen Norm und den
                             grundlegenden Anforderungen der
                             EG-Richtlinie 97/23/EG für
                             Druckgeräte (PED)
    Literaturhinweise

    Abstract - (Show below) - (Hide below)

    Describes the requirements and test methods for the design, manufacturing, safe operation and the rational energy usage for standard boilers and low temperature boilers (with 'boiler' in the sense of 'boiler body') from steel and cast iron to be equipped with separately marketed forced draught burners according to the relevant burner standards (for automatic forced draught burners for gaseous fuels see EN 676 and for atomising oil burners see EN 267) up to a nominal heat output of 10 MW.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
    EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
    ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
    EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    EN 12953-12:2003 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
    ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
    ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
    EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
    EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
    EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
    ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
    EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
    ISO 15610:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
    EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
    EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
    EN 10217-4:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
    EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
    EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
    EN 303-2:2017 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
    ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
    EN 12953-1:2012 Shell boilers - Part 1: General
    EN 12953-7:2002 Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
    EN ISO 15611:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
    EN 303-3:1998/AC:2006 HEATING BOILERS - PART 3: GAS-FIRED CENTRAL HEATING BOILERS ASSEMBLY COMPRISING A BOILER BODY AND A FORCED DRAUGHT BURNER
    EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
    ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
    ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
    ISO 15611:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
    EN 12953-3:2016 Shell boilers - Part 3: Design and calculation for pressure parts
    EN 12953-11:2003 Shell boilers - Part 11: Acceptance tests
    EN 10021:2006 General technical delivery conditions for steel products
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
    EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
    EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    ISO 857-1:1998 Welding and allied processes Vocabulary Part 1: Metal welding processes
    EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    EN 1563:2011 Founding - Spheroidal graphite cast irons
    EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
    EN 10226-3:2005 Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
    EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
    EN 303-7:2006 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
    ISO 185:2005 Grey cast irons Classification
    EN 12953-10:2003 Shell boilers - Part 10 : Requirements for feedwater and boiler water quality
    EN 12953-8:2001/AC:2002 SHELL BOILERS - PART 8: REQUIREMENTS FOR SAFEGUARDS AGAINST EXCESSIVE PRESSURE
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    ISO 228-2:1987 Pipe threads where pressure-tight joints are not made on the threads Part 2: Verification by means of limit gauges
    EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
    ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
    EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
    ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
    EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
    ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
    DIN EN 14610:2005-02 WELDING AND ALLIED PROCESSES - DEFINITIONS OF METAL WELDING PROCESSES
    EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    EN 10217-1:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
    EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
    EN 10217-6:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
    EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
    EN 1561:2011 Founding - Grey cast irons
    EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective