DIN EN 14846:2008-11
Current
The latest, up-to-date edition.
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Classification
4.1 General
4.2 Classification
4.3 Category of use (first digit)
4.4 Durability and load on latchbolt (second digit)
4.5 Door mass and closing force (third digit)
4.6 Suitability for use on fire/smoke doors (fourth
digit)
4.7 Safety (fifth digit)
4.8 Corrosion, temperature and humidity (sixth digit)
4.9 Security (seventh digit)
4.10 Security - electrical function (eighth digit)
4.11 Security - electrical manipulation (ninth digit)
5 Requirements
5.1 General
5.2 Category of use
5.3 Durability
5.4 Door mass and closing force
5.5 Suitability for use on fire/smoke doors
5.6 Safety
5.7 Corrosion, temperature and humidity requirements
5.8 Security requirements
5.9 Security - Electrical function - Status indication
5.10 Security - Electrical manipulation
5.11 Requirements for product information
6 Test methods
6.1 Test procedure
6.2 Category of use tests
6.3 Durability tests
6.4 Door mass and closing force
6.5 Fire/smoke resistance tests
6.6 Safety
6.7 Corrosion, temperature and humidity tests
6.8 Security tests
6.9 Security - Electrical function tests - Status
indication
6.10 Security - Electrical manipulation tests
7 Marking
8 Evaluation of conformity
8.1 Initial type test
8.2 Sampling, testing and conformity criteria
8.3 Factory production control
8.4 Periodic testing
8.5 Annual testing
Annex A (normative) - Fire/smoke test requirements
Annex B (normative) - Test sampling and sequencing
Annex C (normative) - Installation and fixing
instructions
Annex ZA (normative) - Clauses of this European
Standard addressing the provisions of
the EU Construction Products Directive
(89/106/EEC)
Bibliography
Describes requirements and test methods for strength, security, durability and function of electrical and electronic components for all types of electromechanically operated locks and striking plates used on doors, window doors and entrance doors in buildings.
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 14846:2008 | Identical |
| EN 1906:2012 | Building hardware - Lever handles and knob furniture - Requirements and test methods |
| EN 1125:2008 | Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods |
| EN 61000-4-11:2004/A1:2017 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-11: TESTING AND MEASUREMENT TECHNIQUES - VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TESTS (IEC 61000-4-11:2004/A1:2017) |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| EN 1303:2015 | Building hardware - Cylinders for locks - Requirements and test methods |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| EN 12209:2016 | Building hardware - Mechanically operated locks and locking plates - Requirements and test methods |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 12320:2012 | Building hardware - Padlocks and padlock fittings - Requirements and test methods |
| PREN 13637 : DRAFT 2014 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED EXIT SYSTEMS FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| IEC 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| EN 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| EN 179:2008 | Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.