DIN EN 15274:2015-06
Current
Current
The latest, up-to-date edition.
GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-01-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics for intended uses
5 Requirements
6 Assessment and verification of constancy of
performance (AVCP)
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the
EU Construction Products Regulation
Bibliography
Defines requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 15274:2015 | Identical |
| NF EN 15274 : 2015 | Identical |
| NBN EN 15274 : 2015 | Identical |
| NS EN 15274 : 2007 | Identical |
| EN 15274:2015 | Identical |
| NEN EN 15274 : 2015 | Identical |
| UNE-EN 15274:2015 | Identical |
| BS EN 15274:2015 | Identical |
| SN EN 15274:2015 | Identical |
| EN ISO 14896:2009 | Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009) |
| EN 13999-4:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
| EN ISO 15605:2004 | Adhesives - Sampling (ISO 15605:2000) |
| ISO 6721-2:2008 | Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 1067:2005 | Adhesives - Examination and preparation of samples for testing |
| EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| ISO 15605:2000 | Adhesives Sampling |
| EN 1242:2013 | Adhesives - Determination of isocyanate content |
| EN ISO 6721-2:2008 | Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| ISO 11343:2003 | Adhesives Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions Wedge impact method |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN ISO 9664:1995 | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear (ISO 9664:1993) |
| ISO 14896:2009 | Plastics — Polyurethane raw materials — Determination of isocyanate content |
| EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
| ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
| EN 12092:2001 | Adhesives - Determination of viscosity |
| ISO 11339:2010 | Adhesives T-peel test for flexible-to-flexible bonded assemblies |
| EN 14022:2010 | Structural Adhesives - Determination of the pot life (working life) of multi-component adhesives |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 15109:1998 | Adhesives Determination of the time to rupture of bonded joints under static load |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 15336:2007 | Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
| EN 13999-2:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2: Determination of volatile organic compounds |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| EN ISO 11343:2005 | Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) |
| EN 923 : 2015 COR 2016 | ADHESIVES - TERMS AND DEFINITIONS |
| ISO 75-3:2004 | Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| EN 13999-3:2007+A1:2009 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3: Determination of volatile aldehydes |
| EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 9664:1993 | Adhesives Test methods for fatigue properties of structural adhesives in tensile shear |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.