EN 12457-2:2002
|
Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
|
ANS 16.1 : 2003(R2008)
|
MEASUREMENT OF THE LEACHABILITY OF SOLIDIFIED LOW-LEVEL RADIOACTIVE WASTES BY A SHORT-TERM TEST PROCEDURE
|
CEN/TS 16637-2:2014
|
Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test
|
DIN ISO 5725-2:2002-12
|
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
|
EN 14997:2015
|
Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control
|
NEN 7345 : 1995
|
LEACHING CHARACTERISTICS OF SOLID EARTHY AND STONY BUILDING AND WASTE MATERIALS - LEACHING TESTS - DETERMINATION OF THE LEACHING OF INORGANIC COMPONENTS FROM BUILDINGS AND MONOLITIC WASTE MATERIALS WITH THE DIFFUSION TEST
|
EN 12457-4:2002
|
Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
|
EN 14346:2006
|
CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT
|
ISO 5667-3:2012
|
Water quality Sampling Part 3: Preservation and handling of water samples
|
CEN/TS 15864:2015
|
Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
|
EN 12457-1:2002
|
Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
EN 16192:2011
|
Characterization of waste - Analysis of eluates
|
EN ISO 5667-3:2012
|
Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
|
ISO 3696:1987
|
Water for analytical laboratory use — Specification and test methods
|
EN 12920:2006+A1:2008
|
Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions
|
EN ISO 3696:1995
|
Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
|
EN 15002:2015
|
Characterization of waste - Preparation of test portions from the laboratory sample
|
EN 12457-3:2002
|
Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
|
CEN/TS 14405 : 2004
|
CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
|
CEN/TS 15862:2012
|
Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
|
EN 14899:2005
|
Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
|
DIN ISO 3696:1991-06
|
WATER FOR ANALYTICAL LABORATORY USE - SPECIFICATION AND TEST METHODS
|
EN 14429:2015
|
Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition
|